[es] - Windows file sharing izmedju dva inteface-a (wireless i lan)

easyyu
Pol isidor
MSc. Elektrotehnika-Telekomunikacije
Kanjiza

Član broj: 18220
Poruke: 1729
*.dynamic.isp.telekom.rs.

ICQ: 314201297

+170 Profil

Windows file sharing izmedju dva inteface-a (wireless i lan)

^{21.08.2012. u 21:24 - pre 141 meseci}

Ovako..imam problem da mi se racunari ne vide preko windows file sharing-a!
Na primer:
Pc1 ima ip:192.168.50.1 (lan ethernet)
laptop win7 ima 192.168.60.1 (wlan1)
Mogu da pingujem sa PC1 ip address 192.168.60.1
Mogu da pingujem sa laptop-a ip address 192.168.50.1

Ali ako probam da pingujem sa imenamina:

Code:
ping pc1

ili

Code:
ping laptop

dobijam timeout! zasto?

Sledece sto me muci je da se racunari ne vide preko windows file sharing-a. Znaci ne mogu da browse-ujem PC-e tj jednostavno kao da mi je workgroup prazan tj da nema drugih racunara u mrezi.
Znaci ovo pokusavam u windows network preko windows explorer-a i kompjuteri se ne pojavljuju u listi!
Zasto?
Sta treba da uradim da bih imao file sharing i computer browsing?
Firewall-i na oba racunara su iskljucena u svrhu testirana gore napomenutog.

Ono sto mi je bitno jako je da uredjaji koji se konektuju na wifi (wlan1) interface dobijaju IP adrese iz pool-a koji je raclicit od LAN pool-a. Dole se vidi da je to tako i podeseno.
Sto se tice interneta..on radi i nemam problema sa uredjajima koji se kace kako na wlan1 tako i na LAN

Evo moj config:

Code:

/interface> print
Flags: D - dynamic, X - disabled, R - running, S - slave
#     NAME                                                                  TYPE               MTU L2MTU  MAX-L2MTU
0  R  LAN                                                                   ether             1500
1  R  ADSL                                                                  ether             1500
2  R  wlan1                                                                 wlan              1500  2290

Code:

/ip address> print
Flags: X - disabled, I - invalid, D - dynamic
#   ADDRESS            NETWORK         INTERFACE
0   ;;; added by setup
     192.168.50.99/24   192.168.50.0    LAN
1   192.168.60.98/24   192.168.60.0    wlan1
2 D 192.168.55.1/24    192.168.55.0    ADSL

Code:

/ip dhcp-server> pri
Flags: X - disabled, I - invalid
#   NAME                  INTERFACE                 RELAY           ADDRESS-POOL                 LEASE-TIME ADD-ARP
0   wifi                  wlan1                                     wifi                         3d
1   server1               LAN                                     Local                        3d

Code:

/ip dhcp-client> pri
Flags: X - disabled, I - invalid
# INTERFACE USE-PEER-DNS ADD-DEFAULT-ROUTE STATUS ADDRESS
0 ADSL yes yes bound 192.168.55.1/24

Code:

/ip pool> pri
# NAME                                                                              RANGES
0 Local                                                                             192.168.50.1-192.168.50.15
1 wifi                                                                              192.168.60.20-192.168.60.25

Code:

/ip dns> pri
                servers:
        dynamic-servers: 8.8.4.4,208.67.222.222
  allow-remote-requests: yes
    max-udp-packet-size: 4096
             cache-size: 2048KiB
          cache-max-ttl: 1w
             cache-used: 141KiB

Code:
/ip firewall nat> pri
Flags: X - disabled, I - invalid, D - dynamic
1 chain=srcnat action=masquerade out-interface=ADSL

Code:
FILTER RULES ARE EMPTY!

Code:
/ip route> pri
Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
#      DST-ADDRESS        PREF-SRC        GATEWAY            DISTANCE
0 ADS  0.0.0.0/0                          192.168.55.99             0
1 ADC  192.168.50.0/24    192.168.50.99   LAN                       0
2 ADC  192.168.55.0/24    192.168.55.1    ADSL                      0
3 ADC  192.168.60.0/24    192.168.60.98   wlan1                     0

Svaka preporuka mi je dobrodosla..
Unapred hvala na pomoci!