Na sajtu
http://www.xms888.tk prikazan je player XMS-888 DVD Mpeg-4, vrlo slican NEO-u PDX77.
Na strani screenshots postoji slika "hidden menu" koja se dobija kombinacijom tastera
Setup - Stop - |<< - >>|
Da li je neko probao da dodje do tog menija na NEO-u? (meni nije uspelo!)
Da li postoji neka druga kombinacija tastera ili nesto slicno?
na tom uredjaju postoji i EKVILAJZER!
Da li postoji tako nesto na NEO-u i koji taster ili kombinaciju koristiti?
Najnovija verzija firmware-a tog uredjaja je 1.2 (inace velicine je 1Mb)
prenosim sa tog sata kako se menja firmware:
(da li je moguce isto uraditi i na NEO-u)
Burning Firmware to CD.
Extract the bank30.rom file from the zip file, and then burn the extracted file to a disc in ISO9660 format and close (finalize) the disc.
It's only small, so burn no faster than say 8-12x.
CDRW's work fine.
Burning file to disc, Nero instructions firmware.pdf
Loading the Firmware into the XMS-888 player.
My method
1. Eject the disc tray (take out any other disc that might be there)
2. Put the disc (with the firmware on it) on the tray, but don't push it in
3. Turn off the player for 10 seconds (as I want to be sure that the player is fresh to start with)
4. Turn the player on, it will suck the disc in (if not, press open/close to suck it in)
5. It will - read the disc, erase the old firmware, write the new firmware
6. Player will then put itself into standby.
7. Power the player off, wait 10 seconds
8. Power the player back on.
9. IMMEDIATELY start pressing the eject (open / close) button to get the disc out fast, before it starts erasing and writing again.
10. (If your not quick enough, and it starts again, let steps 5 onwards complete again. - DO NOT UNDER ANY CIRCUMSTANCES TURN OFF THE PLAYER WHILE IT IS ERASING OR WRITING THE FIRMWARE)
Da li neko zna neke blize podatke o glavnom chipu, a to je ESS Vibratto II ES6688FAD?