Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.

Inventor i bitmape

[es] :: 3D modelovanje :: CAD/CAM :: Inventor i bitmape

[ Pregleda: 3472 | Odgovora: 2 ] > FB > Twit

Postavi temu Odgovori

Autor

Pretraga teme: Traži
Markiranje Štampanje RSS

saleng_42
Kragujevac

Član broj: 38004
Poruke: 143
89.216.228.*

ICQ: 232705697


Profil

icon Inventor i bitmape23.08.2006. u 16:34 - pre 214 meseci
Ako neko zna...

Kako da uvezem bmp (jpg ili sličan) fajl u Inventor ali tako da elemetni tog fajla budu u prepoznati kao elementi sketch-a?

U obzir dolazi i da istu bitmapu uvezem u acad, da eventualno acad prepozna konture kao "svoje" linije, pa da ja onda to mogu preko dwg-a da uvezem u Inventor.

Zahvaljujem

Pozdrav

Sale
 
Odgovor na temu

SlavishaT
Slaviša Todorović
konstruktor alata za obradu lima
Prijedor

Član broj: 41978
Poruke: 358
*.teol.net.



+5 Profil

icon Re: Inventor i bitmape23.08.2006. u 22:48 - pre 214 meseci
Mislim da se u Inventoru slika koja je ubačena u skicu alatkom Insert Image ne može pretvoriti u konturu. U help-u piše da se može koristiti samo za Decal i Emboss feature-e. Evo i Copy-Paste iz Help-a:

Citat:
You may need to represent application of decals, painting, or silk screening. Use the Insert Bitmap tool on the Sketch toolbar to add artwork to a sketch, and then use the Decal or Emboss tools on the Feature toolbar to apply the image to a part face.

On the Standard toolbar, click the 2D Sketch tool, and then click the planar face or work plane to set the sketch plane.
On the Sketch toolbar, click the Insert Image tool.
On the Open dialog box, browse to the folder where the image file is located, and then click Open.
The cursor is attached to the upper left corner of the image. Click in graphics window to place the image.
Continue to place images or right-click and select Done.
As needed, adjust the position of the image.
Click the image and drag to move it horizontally or vertically.
Click corners to pivot the image.
Click an edge to resize the image. It retains its original aspect ratio.
Click an edge or corner of the image bounding rectangle, and then use constraint and dimension tools to precisely position the image boundary.
If desired, right-click the image in the graphics window or the icon in the browser to use options on the Image Properties dialog box.
The image might be reversed if the work plane normal is not facing you. In the Orientation box, click to rotate right or left or mirror horizontally or vertically.
In Transparency, click Use Mask to make the image transparent. The mask determines the color used for transparency.


Note: If you selected the Link check box when selecting an image, right-click the image in the browser and select Update to retrieve the latest version.


Pogledaj ovu temu: http://www.elitesecurity.org/t...-jpg-prebaciti-format-auto-cad , mislim da ćeš tu naći odgovor za prebacivanje rasterske u vektorsku grafiku.
Pozdrav

 
Odgovor na temu

saleng_42
Kragujevac

Član broj: 38004
Poruke: 143
89.216.228.*

ICQ: 232705697


Profil

icon Re: Inventor i bitmape24.08.2006. u 17:23 - pre 214 meseci
Hvala Siniša.

Pročitao sam ovu temu za koju si dao link, pa ni tamo nije bilo preterano optimistično...

Srećom, u međuvremenu je prestala potreba - našlo se drugačije rešenje
Pozdrav

Sale
 
Odgovor na temu

[es] :: 3D modelovanje :: CAD/CAM :: Inventor i bitmape

[ Pregleda: 3472 | Odgovora: 2 ] > FB > Twit

Postavi temu Odgovori

Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.