Naleteo sam na netu da je nekad bio taj problem, da on ni ne zna da je zavrsio, ostane u tom statusu.
Ali ja posle 2h za film od 2.5GB prekinem kopiranje, pustim film na TV i posle 15 minuta pukne. Nisam se setio da uporedim hash.
Sutra cu da proverim.
A sto se tice dmesg. Ucita drajvere normalno, sve je OK. Startujem kopiranje, na kraju posle 2h izvucem usb i jedino u dmesg sto mi se crveni je nakon cupanja USB
[ 7441.339954] usb 1-4: new high-speed USB device number 5 using xhci_hcd
[ 7441.560216] usb 1-4: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00
[ 7441.560218] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7441.560220] usb 1-4: Product: Mass Storage
[ 7441.560221] usb 1-4: Manufacturer: Generic
[ 7441.560222] usb 1-4: SerialNumber: F34A94CE
[ 7441.570242] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 7441.570419] scsi host11: usb-storage 1-4:1.0
[ 7442.609467] scsi 11:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
[ 7442.609815] sd 11:0:0:0: Attached scsi generic sg3 type 0
[ 7442.610493] sd 11:0:0:0: [sde] 30924800 512-byte logical blocks: (15.8 GB/14.7 GiB)
[ 7442.611446] sd 11:0:0:0: [sde] Write Protect is off
[ 7442.611448] sd 11:0:0:0: [sde] Mode Sense: 23 00 00 00
[ 7442.612267] sd 11:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 7442.627596] sde: sde1
[ 7442.651570] sd 11:0:0:0: [sde] Attached SCSI removable disk
[ 7443.109711] FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 7443.925456] EXT4-fs warning (device sdd1): htree_dirblock_to_tree:1004: inode #2: lblock 0: comm git: error -5 reading directory block
[ 7497.450674] EXT4-fs warning (device sdd1): htree_dirblock_to_tree:1004: inode #2: lblock 0: comm git: error -5 reading directory block
[ 7500.382655] EXT4-fs warning (device sdd1): htree_dirblock_to_tree:1004: inode #2: lblock 0: comm git: error -5 reading directory block
[ 7502.493201] EXT4-fs warning (device sdd1): htree_dirblock_to_tree:1004: inode #2: lblock 0: comm git: error -5 reading directory block
[ 7503.585025] EXT4-fs warning (device sdd1): htree_dirblock_to_tree:1004: inode #2: lblock 0: comm git: error -5 reading directory block
[ 7508.285862] EXT4-fs warning (device sdd1): htree_dirblock_to_tree:1004: inode #2: lblock 0: comm git: error -5 reading directory block
[ 7517.466103] Buffer I/O error on dev sdd1, logical block 1606659, lost sync page write
[ 7517.466106] JBD2: Error -5 detected when updating journal superblock for sdd1-8.
[ 7517.466106] Aborting journal on device sdd1-8.
[ 7517.466108] Buffer I/O error on dev sdd1, logical block 1606659, lost sync page write
[ 7517.466108] JBD2: Error -5 detected when updating journal superblock for sdd1-8.
[ 7587.435105] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
[ 8039.718810] usb 1-4: USB disconnect, device number 5
[ 8039.722328] print_req_error: 10145 callbacks suppressed
[ 8039.722331] blk_update_request: I/O error, dev sde, sector 23743680 op 0x1:(WRITE) flags 0x4800 phys_seg 2 prio class 0
[ 8039.722345] blk_update_request: I/O error, dev sde, sector 20949520 op 0x1:(WRITE) flags 0x4800 phys_seg 3 prio class 0
[ 8039.722369] blk_update_request: I/O error, dev sde, sector 23743920 op 0x1:(WRITE) flags 0x4800 phys_seg 2 prio class 0
[ 8039.722385] blk_update_request: I/O error, dev sde, sector 23744160 op 0x1:(WRITE) flags 0x4800 phys_seg 2 prio class 0
[ 8039.722401] blk_update_request: I/O error, dev sde, sector 20949760 op 0x1:(WRITE) flags 0x4800 phys_seg 3 prio class 0
[ 8039.722409] blk_update_request: I/O error, dev sde, sector 23744400 op 0x1:(WRITE) flags 0x4800 phys_seg 2 prio class 0
[ 8039.722426] blk_update_request: I/O error, dev sde, sector 20950000 op 0x1:(WRITE) flags 0x4800 phys_seg 3 prio class 0
[ 8039.722438] blk_update_request: I/O error, dev sde, sector 20950240 op 0x1:(WRITE) flags 0x4800 phys_seg 3 prio class 0
[ 8039.722450] blk_update_request: I/O error, dev sde, sector 23744640 op 0x1:(WRITE) flags 0x4800 phys_seg 2 prio class 0
[ 8039.722466] blk_update_request: I/O error, dev sde, sector 20950480 op 0x1:(WRITE) flags 0x4800 phys_seg 3 prio class 0
[ 8041.821655] Buffer I/O error on dev sde1, logical block 32770, lost async page write
[ 8041.880398] FAT-fs (sde1): FAT read failed (blocknr 12212)