cao svima, trebala bi mi pomoc jel nikako ne mogu da pristupim podesavanju Geneko WX-1590.... ne znam mu sifru za pristup podesavanje pise mi samo -Password-
unapred zahvalan
unapred zahvalan
pomoc oko sifre za GENEKO
Zaključano
Zakačeno
Pristupas mu sa sledece IP adrese:
http://192.168.5.100
User name: admin
Password: admin
Ukoliko ne prođe, procedura za reset na fabrička podesavanja je sledeca:
--Reset device--
This unit can be reset to factory defaults by reset hole and the procedure can be done with the following steps.
Step1: You can reset the Access Point’s settings to factory defaults by pushing a paperclip in the little hole next to the UTP port while the Access Point is on and do not release it right away.
Step2: Release the reset button when the “ACT” LED from burning to blinking. Normally, it may take 5~10 seconds. After release the reset button, the unit has been reverted to default setting.
User’s
http://192.168.5.100
User name: admin
Password: admin
Ukoliko ne prođe, procedura za reset na fabrička podesavanja je sledeca:
--Reset device--
This unit can be reset to factory defaults by reset hole and the procedure can be done with the following steps.
Step1: You can reset the Access Point’s settings to factory defaults by pushing a paperclip in the little hole next to the UTP port while the Access Point is on and do not release it right away.
Step2: Release the reset button when the “ACT” LED from burning to blinking. Normally, it may take 5~10 seconds. After release the reset button, the unit has been reverted to default setting.
User’s
Potpis
Samo upornost pobjedjuje!