Srodne teme
Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.

pppd, pppoe, MPPE/MPPC, mschap-v2 nece

[es] :: Linux mreže :: pppd, pppoe, MPPE/MPPC, mschap-v2 nece

[ Pregleda: 3560 | Odgovora: 1 ] > FB > Twit

Postavi temu Odgovori

Autor

Pretraga teme: Traži
Markiranje Štampanje RSS

anon676

Član broj: 676
Poruke: 759
*.verat.net



Profil

icon pppd, pppoe, MPPE/MPPC, mschap-v2 nece27.07.2004. u 18:50 - pre 240 meseci
Pozdrav. Imam jedan problemcic. Nalazim se iza gw-a na kom je wireless kartica koji radi autentifikaciju sa freeradius serverom (znaci nemam frke sa sertifikatima itd.). Koristim rp-pppoe i pppd 2.4.2 (patchovan za MPPE), linux 2.6.7 (sa patchevima za mppe). PPP podrska u kernelu je ukljucena kao modul.

*(Podrska za MPPE preuzeta sa ovog url-a http://www.polbox.com/h/hs001/)

Greska koju dobijam (full debug ukljucen u pppd-u):
Citat:


using channel 17
Using interface ppp0
Connect: ppp0 <--> eth0
Couldn't increase MTU to 1500
Couldn't increase MRU to 1500
sent [LCP ConfReq id=0x1 <mru 1440> <auth chap MS-v2> <magic 0xc3efcfb4>]
rcvd [LCP ConfReq id=0x1 <auth eap> <magic 0x2f3eddc9>]
sent [LCP ConfNak id=0x1 <auth chap 07>]
rcvd [LCP ConfReq id=0x2 <auth chap MS-v2> <magic 0x2f3eddc9>]
sent [LCP ConfAck id=0x2 <auth chap MS-v2> <magic 0x2f3eddc9>]
sent [LCP ConfReq id=0x1 <mru 1440> <auth chap MS-v2> <magic 0xc3efcfb4>]
rcvd [LCP ConfAck id=0x1 <mru 1440> <auth chap MS-v2> <magic 0xc3efcfb4>]
Couldn't increase MTU to 1500
sent [LCP EchoReq id=0x0 magic=0xc3efcfb4]
sent [CHAP Challenge id=0xbc <8ce77a11f92f91cce8c8681bb46fe808>, name = "tesla"]
rcvd [LCP EchoReq id=0x0 magic=0x2f3eddc9]
sent [LCP EchoRep id=0x0 magic=0xc3efcfb4]
rcvd [CHAP Challenge id=0xa5 <b25b1f4c7263942681a0da54792907f0>, name = "server"]
sent [CHAP Response id=0xa5 <74855173034317384b68d7569f0f559300000000000000000a3026e951eb9affede37b5bb181cfe5bacaf4f8ebdf373d00>, name = "dpanic"]
rcvd [LCP EchoRep id=0x0 magic=0x2f3eddc9]
rcvd [CHAP Response id=0xbc <ca39bca5b83438fb5ba0f3503d4b30f4000000000000000037fe46cbeb4d5e8127ae60d3e4aea410c4b39685afce112e00>, name = "server"]
No CHAP secret found for authenticating server
Peer server failed CHAP authentication
sent [CHAP Failure id=0xbc ""]
Couldn't increase MTU to 1500
Couldn't increase MRU to 1500
sent [LCP TermReq id=0x2 "Authentication failed"]
sent [LCP TermReq id=0x3 "Authentication failed"]
rcvd [CHAP Failure id=0xa5 "\024\37777777655\007@(\\\007@h\37777777723\006@\377777777309\001@\007"]
Discarded non-LCP packet when LCP not open
rcvd [LCP TermReq id=0x3 "Authentication failed"]
sent [LCP TermAck id=0x3]
rcvd [LCP TermAck id=0x2]
Connection terminated.
using channel 18
Using interface ppp0
Connect: ppp0 <--> eth0
Couldn't increase MTU to 1500
Couldn't increase MRU to 1500
sent [LCP ConfReq id=0x1 <mru 1440> <auth chap MS-v2> <magic 0x29cd363e>]
rcvd [LCP ConfReq id=0x1 <auth eap> <magic 0xf81a2895>]
sent [LCP ConfNak id=0x1 <auth chap 07>]
rcvd [LCP ConfReq id=0x2 <auth chap MS-v2> <magic 0xf81a2895>]
sent [LCP ConfAck id=0x2 <auth chap MS-v2> <magic 0xf81a2895>]
sent [LCP ConfReq id=0x1 <mru 1440> <auth chap MS-v2> <magic 0x29cd363e>]
rcvd [LCP ConfReq id=0x2 <auth chap MS-v2> <magic 0xf81a2895>]
sent [LCP ConfAck id=0x2 <auth chap MS-v2> <magic 0xf81a2895>]
sent [LCP ConfReq id=0x1 <mru 1440> <auth chap MS-v2> <magic 0x29cd363e>]
rcvd [LCP ConfAck id=0x1 <mru 1440> <auth chap MS-v2> <magic 0x29cd363e>]
Couldn't increase MTU to 1500
sent [LCP EchoReq id=0x0 magic=0x29cd363e]
sent [CHAP Challenge id=0x39 <75532df85f3cbd75f11169b587e7b74d>, name = "tesla"]
rcvd [LCP EchoReq id=0x0 magic=0xf81a2895]
sent [LCP EchoRep id=0x0 magic=0x29cd363e]
rcvd [CHAP Challenge id=0xb <21cb8631069d2f77ccc47604be5221a7>, name = "server"]
sent [CHAP Response id=0xb <9059aad7bd5526a05340c178f82fc7370000000000000000923b1ec29a0f23f62d492f36f68409b3320269bbe8cf438600>, name = "dpanic"]
rcvd [LCP EchoRep id=0x0 magic=0xf81a2895]
rcvd [CHAP Response id=0x39 <5e0fba3663668df2e2225ec10cb8bf5a00000000000000000f361677accfeb02aa669e3f7650f7ddd7a362683e55ff1200>, name = "server"]
No CHAP secret found for authenticating server
Peer server failed CHAP authentication
sent [CHAP Failure id=0x39 ""]
Couldn't increase MTU to 1500
Couldn't increase MRU to 1500
sent [LCP TermReq id=0x2 "Authentication failed"]
rcvd [CHAP Failure id=0xb "\024\37777777655\007@(\\\007@h\37777777723\006@\377777777309\001@\007"]
Discarded non-LCP packet when LCP not open
rcvd [LCP TermReq id=0x3 "Authentication failed"]
sent [LCP TermAck id=0x3]
rcvd [LCP TermAck id=0x2]
Connection terminated.



Ima li ko kakvu ideju?
Prikačeni fajlovi
 
Odgovor na temu

anon676

Član broj: 676
Poruke: 759
*.verat.net



Profil

icon Re: pppd, pppoe, MPPE/MPPC, mschap-v2 nece29.07.2004. u 17:33 - pre 240 meseci
Posle duge noći debagovanja pppd-a shvatio sam da su ljudi iz Roaring Penguin napravili grešku u adsl-connect skripti izbacivši Compression Control Protocol (noccp). Znači rešenje problema je sledeće: editovati adsl-connect skriptu iz koje se treba izbaciti noccp parametar. Od PPPD parametara dovoljni su `refuse-eap mppe required` (mppe patch, nije onaj stdopt mppe patch).
 
Odgovor na temu

[es] :: Linux mreže :: pppd, pppoe, MPPE/MPPC, mschap-v2 nece

[ Pregleda: 3560 | Odgovora: 1 ] > FB > Twit

Postavi temu Odgovori

Srodne teme
Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.