[es] - Daljinac opet nece

ostres
Beograd

Član broj: 29521
Poruke: 10
*.vdial.verat.net

Profil

^{07.07.2004. u 08:29 - pre 241 meseci}

Najpre hvala za lirc ali i dalje nece.Pokrenuo sam configure i izabrao meni tv karta->kworld. Pustio dalje konfigurisanje, kompajlirao i inastalirao lirc.
Medjutim kada otkucam modprobe lirc_gpio izbaci:

/lib/modules/2.4.21-0.13mdk/kernel/3rdparty/lirc/lirc_gpio.o.gz: init_module: Invalid request code
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
modprobe: insmod /lib/modules/2.4.21-0.13mdk/kernel/3rdparty/lirc/lirc_gpio.o.gz failed
/lib/modules/2.4.21-0.13mdk/misc/lirc_gpio.o: init_module: Invalid request code
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
modprobe: insmod /lib/modules/2.4.21-0.13mdk/misc/lirc_gpio.o failed
modprobe: insmod lirc_gpio failed

Kada sam ubacio da se lirc_gpio startuje pri podizanju sistema preko dmesg vidim da u delu za ird prijavljuje da ne podrzava kartu.

Kod ucitavanja bttv drajvera pri podizanju sistema vidim da je u pitanju 0.7.1 verzija. Mozda je problem do toga mada karta radi izvrsno.
Nabavio sam sveze bttv drajvere ali ne znam kako da ih ubacim u kernel pa da njih ucitava (kernel 2.4.21-0.13 na MDK 9.1).

Odgovor na temu

zikaa
Zivorad Antonijevic
Beograd

Član broj: 10078
Poruke: 107
*.net.yu

Sajt: zantonijevic.com

+1 Profil

Re: Daljinac opet nece

^{30.09.2004. u 02:05 - pre 238 meseci}

pazi sad ovako i ja imam problem sa ucitavanjem istog modula,
to sam resio , ali idalje ne radi daljinski.

Code:

root@safet-munja:/home/zika# insmod lirc_gpio
Using /lib/modules/2.4.26/misc/lirc_gpio.o
/lib/modules/2.4.26/misc/lirc_gpio.o: unresolved symbol lirc_unregister_plugin
/lib/modules/2.4.26/misc/lirc_gpio.o: unresolved symbol lirc_register_plugin

i sada :

Code:

root@safet-munja:/home/zika# insmod lirc_dev
Using /lib/modules/2.4.26/misc/lirc_dev.o
root@safet-munja:/home/zika# insmod lirc_gpio
Using /lib/modules/2.4.26/misc/lirc_gpio.o

i jos :

Code:

root@safet-munja:/home/zika# insmod lirc_i2c
Using /lib/modules/2.4.26/misc/lirc_i2c.o

mozda necemu sluzi.
i jos u modules.conf ima negde dodato
<code>
alias char-major-61 lirc_dev
</code>

i ucitam module, startujem lircd, i irexec.
al opet nista.
imam i lircd.conf i ~/.lircrc
i jok.

Odgovor na temu

homoludens
marko djordjevic
bgd

Član broj: 7020
Poruke: 307
195.252.85.*

Sajt: www.linux-beograd.org.yu

Profil

Re: Daljinac opet nece

^{04.10.2004. u 17:07 - pre 238 meseci}

da bi lirc radio potreban ti je:

modprobe lirc_gpio
modprobe lirc_dev

i da startujes

licrd

sa odgovarajucim lircd.conf i .lircrc om

ako nece onda preuzmi cvs lirca jer je zadnja verzija 0.6.6 iz oktobra 2002.

zgodan program za lirc je irkick koji radi uz kde 3.2.x

Odgovor na temu

zikaa
Zivorad Antonijevic
Beograd

Član broj: 10078
Poruke: 107
*.net.yu.

Sajt: zantonijevic.com

+1 Profil

daljinski bas nece

^{13.10.2004. u 22:04 - pre 237 meseci}

pojavljuje mi se sledeci problem
sa istim daljinskim:

skinuo sam lirc 0.7.... instalirao
sredio modules.conf,
ucitavam module ,
prepisao /etc/lircd.conf,
~/.lircrc, medjutim nista se i dalje ne dogadja.
evo kako sve to izgleda:

#evo modules.conf-a
#i2c
alias char-major-89 i2c-dev
options i2c-core i2c_debug=1
options i2c-algo-bit bit_test=1
# bttv
alias char-major-81 videodev
alias char-major-81-0 bttv
options bttv card=+78 radio=1
options tuner type=5

#lirc valjad
alias char-major-61 lirc_dev

#kraj modules.conf -a

#evo kako ide ubacivanje modula:
root@safet-munja:/home/zika# insmod lirc_dev
Using /lib/modules/2.4.26/misc/lirc_dev.o
root@safet-munja:/home/zika# insmod lirc_gpio
Using /lib/modules/2.4.26/misc/lirc_gpio.o
root@safet-munja:/home/zika# insmod lirc_i2c
Using /lib/modules/2.4.26/misc/lirc_i2c.o

#a evo i 'dmesg-a' posle toga
lirc_dev: IR Remote Control driver registered, at major 61
lirc_gpio (-1): card type 0x4e, id 0x0
lirc_dev: lirc_register_plugin:sample_rate: 12
lirc_gpio (0): driver registered
i2c-core.o: driver i2c ir driver registered.

#evo i lircd loga nakon
#komandi lircd,irw ( irexec)
Oct 13 22:53:33 safet-munja lircd 0.7.0pre4: lircd(kworld) ready
Oct 13 22:53:36 safet-munja lircd 0.7.0pre4: accepted new client on /dev/lircd
Oct 13 22:53:43 safet-munja lircd 0.7.0pre4: removed client
Oct 13 22:53:45 safet-munja lircd 0.7.0pre4: accepted new client on /dev/lircd
Oct 13 22:53:56 safet-munja lircd 0.7.0pre4: removed client

da li neko zna u cemu gresim, posto je ocigledno da drajveri funkcionisu,
startuje se server , prihvata konekcije, ali klijent programi ne reaguju.
nakon 'irexec' ne dogadja se nista,
nakon 'irw' takodje',
'irrecord' nakon par minuta pritiskanja dugmadi na daljinskom
zavrsava sa porukom:
irrecord: gap not found, can't continue

Odgovor na temu

badaboom
Banjaluka

Član broj: 50487
Poruke: 2
*.etfbl.net.

Profil

Re: Daljinac opet nece

^{21.03.2005. u 18:22 - pre 232 meseci}

Elem, evo skrpljenog rjesenja za slackware 10.1 i lirc-0.7.0 (diff za fajl drivers/lirc_gpio/lirc_gpio.c):

Code:

72,74c72,74
< static unsigned long gpio_mask = 0;
< static unsigned long gpio_enable = 0;
< static unsigned long gpio_lock_mask = 0;
---
> static unsigned long gpio_mask = 0x0ff00;
> static unsigned long gpio_enable = 0x08007;
> static unsigned long gpio_lock_mask = 0x04000;
77c77
< static int sample_rate = 10;
---
> static int sample_rate = 12;
118,120c118
< #ifdef BTTV_KWORLD
<     {BTTV_KWORLD,                 0, 0x00007f00,          0, 0x0004000,          0,   0, 12, 32},
< #endif
---
>     {BTTV_KWORLD,                 0, 0x0000ff00,     0x8007, 0x0004000,          0,   0, 12, 32},
162c160
<
---
> static unsigned int  gpio_reinitialized = 0;
185a184,202
>         dprintk(LOGHEAD "BUSY is %lx\n",card,(unsigned long) gpio_val);
>         //MY insert
>         if (gpio_reinitialized == 0 ) {
>                   if (bttv_write_gpio(card, gpio_enable, gpio_enable)) {
>                           dprintk(LOGHEAD "cannot write to GPIO\n", card);
>                           return -EIO;
>                   }
>                   if (bttv_read_gpio(card, &gpio_val)) {
>                           dprintk(LOGHEAD "cannot read GPIO\n", card);
>                           return -EIO;
>                   }
>                   if (bttv_write_gpio(card, gpio_enable,0)) {
>                           dprintk(LOGHEAD "cannot write to GPIO\n", card);
>                           return -EIO;
>                   }
>                   gpio_reinitialized=1;
>                 }
>         //MY end
>
218a236,240
>     dprintk(LOGHEAD "Code is %lx\n",card,(unsigned long) codes[0]);
>
>     return SUCCESS; // MY RETURN
>
> // Ostatak funkcije se izostavlja
220d241
<     dprintk(LOGHEAD "code is %lx\n",card,(unsigned long) codes[0]);
271d291
< #ifdef BTTV_KWORLD
273d292
< #endif
279,293d297
< #if 0
<         /* derived from e-tech config file */
<         /* 26 + 16 bits */
<         /* won't apply it until it's confirmed with a fly98 */
<      case BTTV_FLYVIDEO_98:
<     case BTTV_FLYVIDEO_98FM:
<         codes[4]=codes[0]<<3;
<         codes[5]=(~codes[4])&0xff;
<
<         codes[0]=0x00;
<         codes[1]=0x1A;
<         codes[2]=0x1F;
<         codes[3]=0x2F;
<         break;
< #endif

Uz ove izmjene ide i drugaciji /etc/lircd.conf:

Code:

begin remote

  name  kworld
  bits            8
  flags CONST_LENGTH
  eps            30
  aeps          100

  one             0    0
  zero            0     0
  gap          199911
  min_repeat         32
  toggle_bit      0

      begin codes
          power                    0x000000000000001E
          source                   0x0000000000000007
          scan                     0x000000000000001C
          mute                     0x0000000000000018
          tvfm                     0x0000000000000003
          fmfreq_up                0x000000000000000C
          fmfreq_down              0x0000000000000004
          n1                       0x0000000000000001
          n2                       0x000000000000000B
          n3                       0x000000000000001B
          n4                       0x0000000000000005
          n5                       0x0000000000000009
          n6                       0x0000000000000015
          n7                       0x0000000000000006
          n8                       0x000000000000000A
          n9                       0x0000000000000012
          n0                       0x0000000000000002
          plus                     0x0000000000000010
          recall                   0x0000000000000013
          record                   0x0000000000000000
          stop                     0x0000000000000008
          play                     0x0000000000000011
          minimize                 0x000000000000000F
          zoom                     0x0000000000000019
          snapshot                 0x000000000000001A
          mts                      0x000000000000000D
          ch_up                    0x000000000000001F
          ch_down                  0x0000000000000017
          vol_up                   0x0000000000000016
          vol_down                 0x0000000000000014
          rew                      0x0000000000000004
          function                 0x000000000000000E
          ffd                      0x000000000000000C
          reset                    0x000000000000001D
      end codes

end remote

Znaci, sve radi sa

Code:

modprobe lirc_gpio gpio_mask=0x000ff00

Ostala podesavanja kao u ostalim postovima.

Elem, problema ima: rjesenje je krajnje proizvoljno, audio se ukljuci cim nesto pristupi /dev/lirc (irw, irexec, irxevent,...). Ako neko ima vremena da trazi rjesenje - srecno. Ja mogu da zivim sa ovim bagom O:) Naknadni MUTE radi (makar u tvtime-u).

Odgovor na temu