Uff, A.G., sta to pravis brate mili, auta, motocikle, avione, brodove, spejs-satle ili neka procesna postrojenja u najsitnije detalje? ;)
Evo ti sa sajta Inventora 2k11 System Requirements (sistemski zahtevi):
http://usa.autodesk.com/adsk/s...?siteID=123112&id=13727144
Za sklopove sa tako ogromnim brojem komponenata minimum je ovo dole:
"For Complex Models, Complex Mold Assemblies, and Large Assemblies (Typically More than 1,000 Parts)
* Windows 7 64-bit, Windows Vista 64-bit (SP2), or Windows XP Professional x64 Edition (SP2)
* AMD64 or Intel® 64 processor
*
6 GB RAM or more
* CAD workstation-class graphics card"
What to look for when configuring a workstation (sta da gledas kad konfigurises svoju radnu stanicu):
http://www.inventor-certified.com/graphics/cert_ws.php
# Memory: Plan for expansion and purchase as much RAM as you can afford.
(
sto vise memorije-koliko god mozes da priustis sebi)
# CPU Speed: Fast is better. If you are constrained by a budget, a slower CPU with more memory will give better overall performance. The size and speed of the on-board instruction cache (L2) do impact Inventor's performance. The bigger the better. Some new CPU's can dynamically give more of the cache to the busy processor.
(
sto brzi CPU-ako te budzet ogranicava, bolje sporiji CPU, a vise RAM memorije ce ti dati bolje sveukupne performanse.Gledati i kolicinu brzog L2 cache-a samog procesora-sto vise L2 cache-a, to bolje...PS:L2 cache je integrisan u jezgru/jezgrima i radi na full speed-u samog kloka procesora)
# CPU and Operating System: Autodesk strongly recommends 64-bit CPUs and operating systems for Inventor.
(
Adsk naravno preporucuje 64-bitni CPU sa obavezno SSE2 setom instrukcija-ovo zadovoljavaju svi procesori izasli u prethodnih 4 godine i vise, i naravno 64-bitni OS)
# Hard Drives: Big and fast is best, plan for expansion. Serial ATA in a Stripped RAID 0 configuration is a good cost performance compromise. Start with one drive, add more drives if you need more speed or space. Since all drives must be identical, make the first drive the fastest performance (RPM, transfer rate, and seek time) that you can afford. Note that the best drives also come with a longer warranty (usually 5 years).
(
hardovi sto veceg kapaciteta, brzi, po mogucstvu vezani u RAID 0 sistem-dobar odnos cena/performanse...trebace ti dva identicna harda, pa biraj najbrze sto mozes...mozda ako se ima kinta ubaciti i neki SSD flash hard disk (solid state drive) za OS i Inventor + veci hard za podatke, mada su jos skupi u odnosu na klasicne hardove-oni sa SandForce SF1200 kontrolerom su trenutno medju najpopularnijim, naravno i Intel pravi svoj veoma dobar SSD X-25 serije)
# Graphics Card: Select a Certified card from this site. Look at the cards memory footprint as well as its performance and cost. The memory footprint may be found by clicking the compare or view keyword in the "Tested" column of the card display table. Some cards may grab a lot of memory up front and use very little for additional windows at the same time. Others may use very little up front, but use more for each additional window opened. Cards with larger memory, may use more main memory when a large number of windows are opened.
(
za grafu se preporucuje neka workstation ranga-znaci nVidia Quadro ili ATi Fire Pro/FireGL...gledati da ima dovoljno memorije na grafickoj kartici, koji je memorijski interfejs-128-bita je neki minimum po mom misljenju, i da je ddr3 memorija)
Za npr. Windows 7 x64 evo sertifikovanih kartica za Inventor 2011:
http://www.inventor-certified....4=on&PCIe=on&results=3
Kod nas se trenutno u Srbiji povoljno mogu naci recimo entry-level malo starija QuadroFX 380 za nekih 85-90 eur nova ili nVQuadro 600 za nekih 150 eur...nazalost, FirePro/FireGL niko ne drzi, morao bi da se kontaktira zvanicni uvoznik za AMD ili njihova kancelarija u BG-u
Ovo bi mogao biti i neki opsti vodic za nabavku hardvera za firme i pojedince koji nameravaju da se ubuduce profi bave CAD/CAM/CAE-om...sistemski zahtevi za buduce verzije svih CAD programa nece sigurno biti nizi od ovih navedenih za Inventor 2011, mogu da idu samo navise
Dalje, probaj da koristis svoj program tako da ucitavas samo podsklopove koji su ti neophodni za rad, ostalo ostavljaj u "lightwave" modu, samo kao graficki prikaz, bez ucitavanja kompletne strukture part-a u memoriju, dosta ce olaksati rad kad masina krene da stuca, drasticno ce skratiti Rebuild-Time sklopa
Pogledaj u HELP-u nesto kao "large assembly management" poglavlja, tu ima dosta o tome kako sebi olaksati rad u masivnim sklopovima
Ovaj "olaksani" mod prikaza masivnih assembly-ja danas ima svaki CAD, ili barem napravi konfiguraciju sklopa tako da ucitava samo najneophodnije podsklopove i delove za editovanje i izmene
Na ovoj stranici imas gotove konfiguracije/laptopove sa specificiranim delovima, procesorom, kolicinom sistemske memorije, grafickom karticom (vendori Dell,HP,Fujitsu,Lenovo, Toshiba) pa pogledaj u tabelama npr. kolone Part Rebuild Time i Assembly Rebuild Time, i dobices neku predstavu o mogucim konfiguracijama za tebe
http://www.inventor-certified.com/graphics/SV15_vend.pdf (vendori, odn. konfiguracije masina)
http://www.inventor-certified.com/graphics/SV15_time.pdf (vremena rebuild-a istih partova i assembly-ja na tim razlicitim konfiguracijama)
Pozz
The eye through which I see God is the same eye through which God sees me; my eye and God's eye are one eye, one seeing, one knowing, one love.
konfiguracija za Inv2011
Re: konfiguracija za Inv2011
