(ako je o ovome već bilo reči na forumu, molim Vas ostavite mi link gde da pročitam)
Želim da prebacim neki stari video zapis:
* sa kamere Sony DCR-TRVTRV239E (Digital 8, Digital Handycam)
(serija: DCR-TRV238E/TRV239E/TRV340E)
* na računar
(bilo koji format, to su već detalji)
Kamera je očigledno starija, nema Firewire, tako da pojma nemam šta i kako daje. Potrebna su mi uputstva kako to da obavim, tj. šta mi je potrebno od kablova, uređaja, kartica za PC, softvera, redosled radnji.
Ovo sam kopirao iz PDF uputstva:
Output connectors
S video output
4-pin mini DIN
Luminance signal: 1 Vp-p, 75 (ohms), unbalanced
Chrominance signal: 0.3 Vp-p, 75 (ohms), unbalanced
Audio/Video output
AV MINIJACK, 1 Vp-p, 75 (ohms), unbalanced, sync negative
327 mV, (at output impedance more than 47 (kilohms))
Output impedance with less than 2.2 k (kilohms)/Stereo minijack (Fi 3.5 mm)
Headphone jack
Stereo minijack (Fi 3.5 mm)
USB jack
mini-B
LANC jack
Stereo mini-minijack (Fi 2.5 mm)
MIC jack
Stereo minijack (Fi 3.5 mm)
DV output
4-pin connector
Pošto osećam da može biti nešto u vezi ovog DV output, evo detalja:
Using the i.LINK cable (DV connecting cable)
Simply connect the i.LINK cable (DV connecting cable) (optional) to DV OUT on your camcorder and to DV IN/OUT on the DV products. With a digital-to-digital connection, video and audio signals are transmitted in digital form for highquality editing. You cannot dub the screen indicators.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert the recorded tape into your camcorder.
(2) Set the input selector on the VCR to DV IN if it is available. Refer to the operating instructions of your VCR.
(3) Set the POWER switch to PLAYER on your camcorder.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
Refer to the operating instructions of your VCR.
Hvala.
Želim da prebacim neki stari video zapis:
* sa kamere Sony DCR-TRVTRV239E (Digital 8, Digital Handycam)
(serija: DCR-TRV238E/TRV239E/TRV340E)
* na računar
(bilo koji format, to su već detalji)
Kamera je očigledno starija, nema Firewire, tako da pojma nemam šta i kako daje. Potrebna su mi uputstva kako to da obavim, tj. šta mi je potrebno od kablova, uređaja, kartica za PC, softvera, redosled radnji.
Ovo sam kopirao iz PDF uputstva:
Citat:
Output connectors
S video output
4-pin mini DIN
Luminance signal: 1 Vp-p, 75 (ohms), unbalanced
Chrominance signal: 0.3 Vp-p, 75 (ohms), unbalanced
Audio/Video output
AV MINIJACK, 1 Vp-p, 75 (ohms), unbalanced, sync negative
327 mV, (at output impedance more than 47 (kilohms))
Output impedance with less than 2.2 k (kilohms)/Stereo minijack (Fi 3.5 mm)
Headphone jack
Stereo minijack (Fi 3.5 mm)
USB jack
mini-B
LANC jack
Stereo mini-minijack (Fi 2.5 mm)
MIC jack
Stereo minijack (Fi 3.5 mm)
DV output
4-pin connector
Pošto osećam da može biti nešto u vezi ovog DV output, evo detalja:
Citat:
Using the i.LINK cable (DV connecting cable)
Simply connect the i.LINK cable (DV connecting cable) (optional) to DV OUT on your camcorder and to DV IN/OUT on the DV products. With a digital-to-digital connection, video and audio signals are transmitted in digital form for highquality editing. You cannot dub the screen indicators.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert the recorded tape into your camcorder.
(2) Set the input selector on the VCR to DV IN if it is available. Refer to the operating instructions of your VCR.
(3) Set the POWER switch to PLAYER on your camcorder.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
Refer to the operating instructions of your VCR.
Hvala.
