Fedora Core 4 - ISDN
Isdn modem PCI Dynalink - Asus
Redhat 9 sve radi OK posle ucitavanja modula modprobe hisax
Istalirao Fedoru 4 ucitao modul hisax prepoznat ISDN-modem ali ni jedna naredba za ISDN ne reaguje uvek izbacije gresku tipa
[root@FedLinux ~]# isdnctrl addif ippp0
Can't open /dev/isdninfo or /dev/isdn/isdninfo: No such file or directory
trazci na netu nisam uspeo da resim problem jer isdninfo stvarno ne postoji u /dev/ folderu dok ga na redhatu9 ima
evo jos nekih parametra koji mogu da pomognu oko moje konfiguracije pa ako neko ima ideju sta da probam bio bi zahvalan
u /dev/ folderu na slovo i ima samo
[root@FedLinux ~]# ls /dev/i*
/dev/initctl
/dev/input:
event0 event1 mice mouse0 mouse1
modul hisax uredno ucitan sa pratecim modulima
[root@FedLinux ~]# lsmod
Module Size Used by
hisax 617885 0
isdn 152897 1 hisax
slhc 7105 1 isdn
dmesg uredno prijavljuje ISDN
[root@FedLinux ~]# dmesg
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 2.46.2.5
HiSax: Layer2 Revision 2.30.2.4
HiSax: TeiMgr Revision 2.20.2.3
HiSax: Layer3 Revision 2.22.2.3
HiSax: LinkLayer Revision 2.59.2.4
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=asus (0)
HiSax: W6692 driver Rev. 1.18.2.4
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Found: Dynalink/AsusCom IS64PH, I/O base: 0xd400, irq: 11
HiSax: IS64PH config irq:11 I/O:d400
W6692: Winbond W6692 version (0): W6692 V00
W6692 ISTA=0x0
W6692 IMASK=0xFF
W6692 D_EXIR=0x0
W6692 D_EXIM=0xFF
W6692 D_RSTA=0xA0
Winbond 6692: IRQ 11 count 1
Winbond 6692: IRQ 11 count 5
HiSax: DSS1 Rev. 2.32.2.3
HiSax: 2 channels added
HiSax: MAX_WAITING_CALLS added
[root@FedLinux ~]# uname -a
Linux FedLinux 2.6.11-1.1369_FC4 #1 Thu Jun 2 22:55:56 EDT 2005 i686 i686 i386 GNU/Linux
neka ideja ??
poz petar
 |  |
 |
