Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.

Problem sa kompjuterom&windowsom

[es] :: Windows desktop :: Problem sa kompjuterom&windowsom

Strane: 1 2

[ Pregleda: 5547 | Odgovora: 20 ] > FB > Twit

Postavi temu Odgovori

Autor

Pretraga teme: Traži
Markiranje Štampanje RSS

das
Sydney

Član broj: 34921
Poruke: 120
210.50.143.*



Profil

icon Re: Problem sa kompjuterom&windowsom16.03.2005. u 02:43 - pre 232 meseci
EVO REZULTATA CITAVOG TESTAAAA

SeaTools Desktop v3.00.07
Copyright (c) 2004 Kroll Ontrack Inc.

3/9/2005 @ 10:24 PM

The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.


System Information:
BIOS Date 03/05/04
Conventional Memory size 638 K
Extended Memory size 58532 K
IO Channel type PCI



Drive Information:
SIZE MODEL
--------- ---------------------
80 GB ST380011A


Serial Number = 5JVA30SF
Int13 Num = 80, PHYS CHS = 16383x16x63.
ParmTable CHS, Rsvd = 9728x255x63

PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
PRIMARY
1 NTFS 0 5098 41943
EXTENDED
2 NTFS 5099 9726 38069


Diagnostic Results:

Seagate DiagATA Quick Test Result: Passed
Recommendation:
The "Quick Test" is adequate for most situations.
Consider running the "Full Test" which
verifies each sector on the drive if you need to run a more
comprehensive diagnostic.



Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------

DIAGATA.EXE Version 3.07.40526ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.

-----------------------------------------------------------------
Timer Resolution: 0.000122
Short Test Begin: 09-Mar-2005 21:32:04
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST380011A
Serial Number: 5JVA30SF
Firmware Revision: 3.06
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 156295279 Sectors
Conductor Cable Reported
ID Method: CSEL
SMART Enabled
SMART Check: Passed
DST - Passed
PIO/DMA Data Compare
Total Bytes = 8151552
Estimated PIO Transfer Rates
Min: 2.35MB/s Max: 2.40MB/s Avg: 2.38MB/s
Estimated DMA Transfer Rates
Min: 72.99MB/s Max: 91.24MB/s Avg: 89.28MB/s
SMART Check: Passed
Short Test Passed: 09-Mar-2005 21:32:56
SMART Disabled


-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI

ATA Full Test Result: Passed



Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------

DIAGATA.EXE Version 3.07.40526ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.

-----------------------------------------------------------------
Timer Resolution: 0.000122
Long Test Begin: 09-Mar-2005 21:32:58
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST380011A
Serial Number: 5JVA30SF
Firmware Revision: 3.06
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 156295279 Sectors
Conductor Cable Reported
ID Method: CSEL
SMART Enabled
SMART Check: Passed
Full Scan (0 to 156295279) - Passed
Elapsed Time: 49.90 Minutes
Estimated Internal Transfer Rates
Min: 1.54Mb/s Max: 342.10Mb/s Avg: 223.52Mb/s
PIO/DMA Data Compare
Total Bytes = 21826560
Estimated PIO Transfer Rates
Min: 2.32MB/s Max: 2.42MB/s Avg: 2.40MB/s
Estimated DMA Transfer Rates
Min: 72.95MB/s Max: 121.58MB/s Avg: 90.04MB/s
Long Test Passed: 09-Mar-2005 22:23:01
SMART Disabled


-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI



File Structure Test Result:

Partition 1 (NTFS (41.9 GB) ) Result: Failed with critical Errors


NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.

Partition 2 (NTFS (38 GB) ) Result: Failed with critical Errors


NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.



******************************************


Recommendation:
All selected physical diagnostics passed.

If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.

If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.




========================================================

SeaTools Desktop v3.00.07
Copyright (c) 2004 Kroll Ontrack Inc.

3/9/2005 @ 10:24 PM

The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.


System Information:
BIOS Date 03/05/04
Conventional Memory size 638 K
Extended Memory size 58532 K
IO Channel type PCI



Drive Information:
SIZE MODEL
--------- ---------------------
80 GB ST380011A


Serial Number = 5JVA30SF
Int13 Num = 80, PHYS CHS = 16383x16x63.
ParmTable CHS, Rsvd = 9728x255x63

PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
PRIMARY
1 NTFS 0 5098 41943
EXTENDED
2 NTFS 5099 9726 38069


Diagnostic Results:

Seagate DiagATA Quick Test Result: Passed
Recommendation:
The "Quick Test" is adequate for most situations.
Consider running the "Full Test" which
verifies each sector on the drive if you need to run a more
comprehensive diagnostic.



Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------

DIAGATA.EXE Version 3.07.40526ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.

-----------------------------------------------------------------
Timer Resolution: 0.000122
Short Test Begin: 09-Mar-2005 21:32:04
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST380011A
Serial Number: 5JVA30SF
Firmware Revision: 3.06
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 156295279 Sectors
Conductor Cable Reported
ID Method: CSEL
SMART Enabled
SMART Check: Passed
DST - Passed
PIO/DMA Data Compare
Total Bytes = 8151552
Estimated PIO Transfer Rates
Min: 2.35MB/s Max: 2.40MB/s Avg: 2.38MB/s
Estimated DMA Transfer Rates
Min: 72.99MB/s Max: 91.24MB/s Avg: 89.28MB/s
SMART Check: Passed
Short Test Passed: 09-Mar-2005 21:32:56
SMART Disabled


-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI

ATA Full Test Result: Passed



Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------

DIAGATA.EXE Version 3.07.40526ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.

-----------------------------------------------------------------
Timer Resolution: 0.000122
Long Test Begin: 09-Mar-2005 21:32:58
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST380011A
Serial Number: 5JVA30SF
Firmware Revision: 3.06
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 156295279 Sectors
Conductor Cable Reported
ID Method: CSEL
SMART Enabled
SMART Check: Passed
Full Scan (0 to 156295279) - Passed
Elapsed Time: 49.90 Minutes
Estimated Internal Transfer Rates
Min: 1.54Mb/s Max: 342.10Mb/s Avg: 223.52Mb/s
PIO/DMA Data Compare
Total Bytes = 21826560
Estimated PIO Transfer Rates
Min: 2.32MB/s Max: 2.42MB/s Avg: 2.40MB/s
Estimated DMA Transfer Rates
Min: 72.95MB/s Max: 121.58MB/s Avg: 90.04MB/s
Long Test Passed: 09-Mar-2005 22:23:01
SMART Disabled


-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI



File Structure Test Result:

Partition 1 (NTFS (41.9 GB) ) Result: Failed with critical Errors


NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.

Partition 2 (NTFS (38 GB) ) Result: Failed with critical Errors


NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.



******************************************


Recommendation:
All selected physical diagnostics passed.

If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.

If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.




========================================================

SeaTools Desktop v3.00.07
Copyright (c) 2004 Kroll Ontrack Inc.

3/9/2005 @ 10:24 PM

The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.


System Information:
BIOS Date 03/05/04
Conventional Memory size 638 K
Extended Memory size 58532 K
IO Channel type PCI



Drive Information:
SIZE MODEL
--------- ---------------------
80 GB ST380011A


Serial Number = 5JVA30SF
Int13 Num = 80, PHYS CHS = 16383x16x63.
ParmTable CHS, Rsvd = 9728x255x63

PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
PRIMARY
1 NTFS 0 5098 41943
EXTENDED
2 NTFS 5099 9726 38069


Diagnostic Results:

Seagate DiagATA Quick Test Result: Passed
Recommendation:
The "Quick Test" is adequate for most situations.
Consider running the "Full Test" which
verifies each sector on the drive if you need to run a more
comprehensive diagnostic.



Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------

DIAGATA.EXE Version 3.07.40526ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.

-----------------------------------------------------------------
Timer Resolution: 0.000122
Short Test Begin: 09-Mar-2005 21:32:04
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST380011A
Serial Number: 5JVA30SF
Firmware Revision: 3.06
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 156295279 Sectors
Conductor Cable Reported
ID Method: CSEL
SMART Enabled
SMART Check: Passed
DST - Passed
PIO/DMA Data Compare
Total Bytes = 8151552
Estimated PIO Transfer Rates
Min: 2.35MB/s Max: 2.40MB/s Avg: 2.38MB/s
Estimated DMA Transfer Rates
Min: 72.99MB/s Max: 91.24MB/s Avg: 89.28MB/s
SMART Check: Passed
Short Test Passed: 09-Mar-2005 21:32:56
SMART Disabled


-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI

ATA Full Test Result: Passed



Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------

DIAGATA.EXE Version 3.07.40526ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.

-----------------------------------------------------------------
Timer Resolution: 0.000122
Long Test Begin: 09-Mar-2005 21:32:58
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST380011A
Serial Number: 5JVA30SF
Firmware Revision: 3.06
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 156295279 Sectors
Conductor Cable Reported
ID Method: CSEL
SMART Enabled
SMART Check: Passed
Full Scan (0 to 156295279) - Passed
Elapsed Time: 49.90 Minutes
Estimated Internal Transfer Rates
Min: 1.54Mb/s Max: 342.10Mb/s Avg: 223.52Mb/s
PIO/DMA Data Compare
Total Bytes = 21826560
Estimated PIO Transfer Rates
Min: 2.32MB/s Max: 2.42MB/s Avg: 2.40MB/s
Estimated DMA Transfer Rates
Min: 72.95MB/s Max: 121.58MB/s Avg: 90.04MB/s
Long Test Passed: 09-Mar-2005 22:23:01
SMART Disabled


-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI



File Structure Test Result:

Partition 1 (NTFS (41.9 GB) ) Result: Failed with critical Errors


NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.

Partition 2 (NTFS (38 GB) ) Result: Failed with critical Errors


NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.



******************************************


Recommendation:
All selected physical diagnostics passed.

If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.

If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.




========================================================

NEKA MI NEKO POJASNI KO DOBRO POZNAJE HD DA LI JE ISPRAVAN?

MOLIM VAS CEKAM 7 DANA VEC NIKO NE ODGOVARA


____________________________

Svakim danom u svakom pogledu sve vise napredujemo!Svakim danom u svakom ....
 
Odgovor na temu

[es] :: Windows desktop :: Problem sa kompjuterom&windowsom

Strane: 1 2

[ Pregleda: 5547 | Odgovora: 20 ] > FB > Twit

Postavi temu Odgovori

Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.