Problem sa kompjuterom&windowsom

Problem sa kompjuterom&windowsom
Zbog ovog slucaja vec sam vam jednom pisao,a vi ste
me savetovali da se obratim servisu,to sam i uradio,ali oni
su,pa sigurno mogu reci ne sposobni da to rese.Dakle ovako imam
Racunar:Intel P4 2,8 GHz;512 MB ram;80 GB HD;Graficku:Radeon 9250
128 MB,GIGABYTE 848P Motherboard,original Windows XP Home Edition
sa Service Pack-om 2. i Norton 2004.Racunar sam kupio u septembru 2004.
Problem je sledeci:svakih 10 ili 15-16 dana Win. padne,znaci
uvece windows radi sve u redu, ali obavezno tako bude kad ga ukljucim ujutro,znaci nakon 10 sati i
cekam jedno 10 minuta ,pojavi se onaj logo sa crvicem sto prolazi
,tako cekam jedno 5 minuta i onda se sam od sebe restartuje ili daje
poruku: "Windows could not start because the following file is missing or
corrupt:\WINNT\SYSTEM32\CONFIG\SYSTEM"
A pre toga znaci prethodnog dana je sve radilo normalno Win se normalno podizao.
Nikakve nove programe sto je najvaznije nisam instalirao prethodno.
Pokusavao sam sa repair i jos nekim metodama koje imaju tamo .. da oporavim sistem jednostavno
nece ne vidi win na hardu.Ja nisam neki strucnjak,ali i ovi tamo u toj prodavnici
isto su pukusavali da oporave sistem bes formatiranja nisu uspeli, a kao neki strucnjaci,ja mislim da oni pojma nemaju.
Znaci jedino pomaze formatiranje particije i ponovno instaliranje sistema.
Instaliram ponovo win radi sve ok, ne prijavljuje nikakvu hardversku gresku,naravno opet
nakon nekoliko dana win padne.Mucio sam se s tim jedno 2-3 meseca i posle sam svaki put kad bi pao win nosio u taj servis.
Prvi put kazu mi to je verovatno do win,ok ja kazem i kupim kod njih win xp home edition,nakon nekoliko dana opet isto.
Sledeci put kazu da su pronasli gresku i da je do procesora-znaci da je procesor sa greskom.
Oni promene procesor opet isto.Sledeci put pred menom su menjali graficku i memoriju i ispitivali hard.
Opet nakon nekoliko dana isto,bas sve isto uvek ista greska kao na pocetku.Moj dodatni problem
je sto ne znam dovoljno dobro eng pa uvek molim nekog od ovih nasih ovde.
Ovde u Au sam dosao pre oko 7 meseci,i verujte dosta su losiji serviseri nego tamo kod nas.
AKO NEKO ZNA STA BI MOGLO BITI U PITANJU NEKA MI POMOGNE!!! HVALA!!!IZMUCI ME VISE OVO!!!

---

Testiraj memoriju, skeniraj HD u potrazi za bad sektorima, uzmi programcic za nadgledanje temperature, proveri napajanje, instaliraj drivere za plocu, skeniraj komp AV-om ( hint: uzmi drugi, nemoj NOrton 2004, mator je )...

---

Teraj nekog iz Srbije da ti posalje piratski WIN XP, i sve ostale programe koje koristis, pa formatiraj HDD, instaliraj piratski WIN XP, i videces kako sve radi OK!
Shala mala.
Ne vreujem da ces dobiti pravu pomoc odavde sa tim informacijama koje dajes.
Ako ti racunar pod garancijom, maltretiraj te u servisu dok ti ne daju nov!

Ja bas mislim da je to do tog diska. Kupi nov disk na drugom mestu, pa probaj. Verovatno ne moze da kopira neki fajl, koji kasnije zatreba. Kakve veze to moze da ima sa RAM-om, HDD-om ili tome slicnom?! Imas li mozda TV karticu ili neku dodatnu PCI?

---

Do sada sam koristio 4 operativna sistema.
Prvo sam instalirao WIndows XP Profesional,pa Win98 i Win2000 znaci ovo sada mi je 4.
OS.Nema sanse da je do instalacionog diska.
Evo danas mi je opet nakon 16 dana pao sistem na isti nacin kao i prethodnog puta.(To sam vec opisivao)
Memoriju sam testirao pomocu Goldmemory programa ok je.(bar je prosla test)
Ne verujem da je do graficke jer mi je ovaj tamo vec menjao graficku ,takodje menjao je i CPU.
E sad da li neko misli da moze biti do hard diska?Neka mi neko kaze neki besplatan i pouzdan program koji mogu da skinem
sa neta za testiranje HD-a.Hvala!!

---

A koji HD imaš? Svaki proizvođač ima svoj program za testiranje ispravnosti diska. Npr. za Maxtor-a je u pitanju program "MaxBlast"...

---

Nesto mi nije jasno

Kako si uspeo da sa WinXP pro predjes na Win 98,ja mislim da je to neizvodljivo?mozda gresim?
Da li si nesto dirao oko servisa?
Ovo oko restarta da nije zbog napajanja?

---

Lici mi na HDD problem po ovome sto pricas. Nadji dijagnosticki alat od proizvodjaca tvoj HDD-a i testiraj ga. Ako nije onda si nesto isostavio ili jednostavno zaboravio da kazes od muke.

Pa prvo sam instalirao win xp ,pa sam video da ne radi ,mislio sam da je do CD-a,pa sam imao neki win 98 i njega sam probao cisto onako da vidim ali i on je nakon nekoliko dana pao.....

---

Gde moze da se vidi marka proizvodjaca???
Ja imam samo podatak 80 GB 7200 valjda brzina(?) i pise HD ST380023A!!!
Ne mislim da je do napajanja zbog evo recimo ovog razloga:
Prosli put kad mi se desilo da WIin padne a i ranije mi se to desavalo,
posto imam dve particije , instaliram novi win na drugoj particiji i instalacija bude redu ,medjutim primetim da mi win ulazi dosta
sporije.Odem na My Computer i cekam jedno 1 minut da udje.
Kad mi se konacno otvorio MC ja kliknem na particiju C (a ja sam ovaj win instalirao na D particiji,znaci win koji ne radi je na C)
I da mi poruku "Do you format C disk" ,nema sanse da udjem.To mi se desavalo vise puta prvo sam mislio da sam zakacio neki
virus ,ali kad sam video da mi se i kasnije to desavalo odbacio sam takvu mogucnost.
Ovo mi se ne desi svaki put.
Mozda je do HD?Ali ovi tamo kreteni su rekli da su proverili HD i kao sve je ok.
Pare i novi komp mi ne daju.Kazu: "mi samo mozemo da ti popravljamo komp".
Zadnje dva puta kad sam bio kod njih oni nista ne urade samo instaliraju win i nista kao gotovo je napravili su.
Ako se desi nesto opet dodjite samo kod nas. ETO TO JE NJIHOV SERVIS.Zeznuo sam se jer sam kupio u nekoj manjoj
kompaniji bili su dosta povoljniji od ostalih ....a znam sigurno 4-5 ljudi koji su kupili isto kod njih i njima sve ok radi......
E znaci kako da proverim za marku proizvodjaca HD-a?Gde pise to?

---

Evo sta mi se desilo! Samo nekoliko minuta posle nego sto sam vam poslao poruku.
Restartujem Winows regularno znaci start->bla bla ....
I pojavi se crni ekran tako je stajalo sigurno jedno desetak minuta.
I posle desetak minuta poruka:"Windows XP could not start because the
following file is missing or corrupt: \WINDOWS\SYTEM32\CONFIG\SYSTEM"
stavi cd uradi repair ......
Podesim u Biosu:First boot CD ROM>.......
Stavim cd u pokusam da ga reinstaliram ili kako se to vec zove nemam pojma vise...
i tamo uopste ne vidi taj Win kao da ne postoji..........
Medjutim imam ja instaliran drugi Win na D particiji koji ne koristim i sluzi mi samo onako kao pomocni...
Udjem u njega iz ovog windows koji ne radi izbrisem C: \WINDOWS\SYTEM32\CONFIG\SYSTEM znaci izbrisem system
i iz c:\windows\repair\system kopiram taj fajl i na ovu prethodnu lokaciju posle toga zatvorim ovaj win.
I pokusam da udjem u ovaj win sto ne nije radio pre i Udje sve normalno kao da nista nije bilo,
samo se rezolucija promenila ,ali ostalo sve radi kao i pre.... namestim rezoluciju i sada radi sve ok kao nista nije ni bilo....
E izgleda da me zeza i norton nece da radi.....daje neku gresku..
JEL MOZE NEKO DA POMOGNE STA JE OVO?

---

Evo sta mi se desilo! Samo nekoliko minuta posle nego sto sam vam poslao poruku.
Restartujem Winows regularno znaci start->bla bla ....
I pojavi se crni ekran tako je stajalo sigurno jedno desetak minuta.
I posle desetak minuta poruka:"Windows XP could not start because the
following file is missing or corrupt: \WINDOWS\SYTEM32\CONFIG\SYSTEM"
stavi cd uradi repair ......
Podesim u Biosu:First boot CD ROM>.......
Stavim cd u pokusam da ga reinstaliram ili kako se to vec zove nemam pojma vise...
i tamo uopste ne vidi taj Win kao da ne postoji..........
Medjutim imam ja instaliran drugi Win na D particiji koji ne koristim i sluzi mi samo onako kao pomocni...
Udjem u njega iz ovog windows koji ne radi izbrisem C: \WINDOWS\SYTEM32\CONFIG\SYSTEM znaci izbrisem system
i iz c:\windows\repair\system kopiram taj fajl i na ovu prethodnu lokaciju posle toga zatvorim ovaj win.
I pokusam da udjem u ovaj win sto ne nije radio pre i Udje sve normalno kao da nista nije bilo,
samo se rezolucija promenila ,ali ostalo sve radi kao i pre.... namestim rezoluciju i sada radi sve ok kao nista nije ni bilo....
E izgleda da me zeza i norton nece da radi.....
JEL MOZE NEKO DA POMOGNE STA JE OVO?

---

@das
Kao sto ti svi mi ovde napominjemo, cim ti se stekne prva priklika tj. cim ti se sistem podigne odmah skeniraj HD i testiraj memoriju...
A za skeniranje u potrazi za bad sektorima, proguglaj malo.
BTW tvoj model HD je Seagate ST380023A...

---

Memoriju sam testirao pomocu Goldmemory programa i ona je OK.
Skinuo sam program sa sajta proizvodjaca ovog moga HD-a.Prvi put kad sam ga testirao pronasao sam
preko 20 Bad sektora.E sad nije mi najjasnije sta predstavljaju ti bad sektori,jer posle tog testa sam
imao opciju da ih oh obrisem ,to sam i uradio.Kasnije sam ponovo testirao i vise nije bilo bad sektora.
Ovaj program se zove SeaTools Desktop i ima nekih pet delova testa...
System Memory
Controller test
Quick test
Full test
File structure
I sad ovako izgledaju rezultati:
Motherboard Primary/secondary IDE controller ima ispred zelenu oznaku sto znaci PASSED,znaci OK JE.
E sad ovo mi je malo nejasno ovako pise:
80GB ST380011A SN:5VJE30SF isto ok, znaci zeleno.
NTFS(41.9GB) Crveno sto naravno znaci FAILED.
NTFS(38GB)Crveno -FAILED.
NE RAZUMEM.
Evo sacuvao sam View Report:
---------------------------------------------------------------------------------------------------
SeaTools Desktop v3.00.07
Copyright (c) 2004 Kroll Ontrack Inc.3/7/2005 @ 7:50 PM

The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.


System Information:
BIOS Date 03/05/04
Conventional Memory size 638 K
Extended Memory size 58532 K
IO Channel type PCI



Diagnostic Results:



System Memory Test Result: Passed
--------------------------------------------------------------------------------------------------------
DA LI JE OVAJ HD U REDU???

---

Pa naravno da nije u redu HDD, odi u servis i reci da ti HDD ima bad sectore! Ili kupi novi hard, on ti nije skup! Pogledaj malo i na http://www.elitesecurity.org/forum/126

Ali da li ce mi praviti probleme posto sada kada testiram HD nema vise tih bad sektora.

---

E i meni se to desava da odjednom prsne windows.Meni je HDD SATA 120 Maxtor!Zamenio sam mu kabal koji ga povezuje sa maticnom i jedno vreme je radio lepo dok nije poceo opet da zeza!Imam XP (piratski)!A kada pokusam da instaliram Linux Mandrake 9.0 nema sanse detektuje HDD iako windows radi???

---

PA jel moze neko da kaze sta da radim Posto sada kad ponovo testiram nema vise
bad sektora ....?

---

EVO REZULTATA CITAVOG TESTA

SeaTools Desktop v3.00.07
Copyright (c) 2004 Kroll Ontrack Inc.

3/9/2005 @ 10:24 PM

The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.


System Information:
BIOS Date 03/05/04
Conventional Memory size 638 K
Extended Memory size 58532 K
IO Channel type PCI



Drive Information:
SIZE MODEL
--------- ---------------------
80 GB ST380011A


Serial Number = 5JVA30SF
Int13 Num = 80, PHYS CHS = 16383x16x63.
ParmTable CHS, Rsvd = 9728x255x63

PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
PRIMARY
1 NTFS 0 5098 41943
EXTENDED
2 NTFS 5099 9726 38069


Diagnostic Results:

Seagate DiagATA Quick Test Result: Passed
Recommendation:
The "Quick Test" is adequate for most situations.
Consider running the "Full Test" which
verifies each sector on the drive if you need to run a more
comprehensive diagnostic.



Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------

DIAGATA.EXE Version 3.07.40526ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.

-----------------------------------------------------------------
Timer Resolution: 0.000122
Short Test Begin: 09-Mar-2005 21:32:04
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST380011A
Serial Number: 5JVA30SF
Firmware Revision: 3.06
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 156295279 Sectors
Conductor Cable Reported
ID Method: CSEL
SMART Enabled
SMART Check: Passed
DST - Passed
PIO/DMA Data Compare
Total Bytes = 8151552
Estimated PIO Transfer Rates
Min: 2.35MB/s Max: 2.40MB/s Avg: 2.38MB/s
Estimated DMA Transfer Rates
Min: 72.99MB/s Max: 91.24MB/s Avg: 89.28MB/s
SMART Check: Passed
Short Test Passed: 09-Mar-2005 21:32:56
SMART Disabled


-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI

ATA Full Test Result: Passed



Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------

DIAGATA.EXE Version 3.07.40526ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.

-----------------------------------------------------------------
Timer Resolution: 0.000122
Long Test Begin: 09-Mar-2005 21:32:58
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST380011A
Serial Number: 5JVA30SF
Firmware Revision: 3.06
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 156295279 Sectors
Conductor Cable Reported
ID Method: CSEL
SMART Enabled
SMART Check: Passed
Full Scan (0 to 156295279) - Passed
Elapsed Time: 49.90 Minutes
Estimated Internal Transfer Rates
Min: 1.54Mb/s Max: 342.10Mb/s Avg: 223.52Mb/s
PIO/DMA Data Compare
Total Bytes = 21826560
Estimated PIO Transfer Rates
Min: 2.32MB/s Max: 2.42MB/s Avg: 2.40MB/s
Estimated DMA Transfer Rates
Min: 72.95MB/s Max: 121.58MB/s Avg: 90.04MB/s
Long Test Passed: 09-Mar-2005 22:23:01
SMART Disabled


-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI



File Structure Test Result:

Partition 1 (NTFS (41.9 GB) ) Result: Failed with critical Errors


NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.

Partition 2 (NTFS (38 GB) ) Result: Failed with critical Errors


NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.



******************************************


Recommendation:
All selected physical diagnostics passed.

If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.

If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.




========================================================

SeaTools Desktop v3.00.07
Copyright (c) 2004 Kroll Ontrack Inc.

3/9/2005 @ 10:24 PM

The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.


System Information:
BIOS Date 03/05/04
Conventional Memory size 638 K
Extended Memory size 58532 K
IO Channel type PCI



Drive Information:
SIZE MODEL
--------- ---------------------
80 GB ST380011A


Serial Number = 5JVA30SF
Int13 Num = 80, PHYS CHS = 16383x16x63.
ParmTable CHS, Rsvd = 9728x255x63

PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
PRIMARY
1 NTFS 0 5098 41943
EXTENDED
2 NTFS 5099 9726 38069


Diagnostic Results:

Seagate DiagATA Quick Test Result: Passed
Recommendation:
The "Quick Test" is adequate for most situations.
Consider running the "Full Test" which
verifies each sector on the drive if you need to run a more
comprehensive diagnostic.



Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------

DIAGATA.EXE Version 3.07.40526ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.

-----------------------------------------------------------------
Timer Resolution: 0.000122
Short Test Begin: 09-Mar-2005 21:32:04
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST380011A
Serial Number: 5JVA30SF
Firmware Revision: 3.06
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 156295279 Sectors
Conductor Cable Reported
ID Method: CSEL
SMART Enabled
SMART Check: Passed
DST - Passed
PIO/DMA Data Compare
Total Bytes = 8151552
Estimated PIO Transfer Rates
Min: 2.35MB/s Max: 2.40MB/s Avg: 2.38MB/s
Estimated DMA Transfer Rates
Min: 72.99MB/s Max: 91.24MB/s Avg: 89.28MB/s
SMART Check: Passed
Short Test Passed: 09-Mar-2005 21:32:56
SMART Disabled


-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI

ATA Full Test Result: Passed



Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------

DIAGATA.EXE Version 3.07.40526ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.

-----------------------------------------------------------------
Timer Resolution: 0.000122
Long Test Begin: 09-Mar-2005 21:32:58
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST380011A
Serial Number: 5JVA30SF
Firmware Revision: 3.06
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 156295279 Sectors
Conductor Cable Reported
ID Method: CSEL
SMART Enabled
SMART Check: Passed
Full Scan (0 to 156295279) - Passed
Elapsed Time: 49.90 Minutes
Estimated Internal Transfer Rates
Min: 1.54Mb/s Max: 342.10Mb/s Avg: 223.52Mb/s
PIO/DMA Data Compare
Total Bytes = 21826560
Estimated PIO Transfer Rates
Min: 2.32MB/s Max: 2.42MB/s Avg: 2.40MB/s
Estimated DMA Transfer Rates
Min: 72.95MB/s Max: 121.58MB/s Avg: 90.04MB/s
Long Test Passed: 09-Mar-2005 22:23:01
SMART Disabled


-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI



File Structure Test Result:

Partition 1 (NTFS (41.9 GB) ) Result: Failed with critical Errors


NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.

Partition 2 (NTFS (38 GB) ) Result: Failed with critical Errors


NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.



******************************************


Recommendation:
All selected physical diagnostics passed.

If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.

If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.




========================================================

SeaTools Desktop v3.00.07
Copyright (c) 2004 Kroll Ontrack Inc.

3/9/2005 @ 10:24 PM

The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.


System Information:
BIOS Date 03/05/04
Conventional Memory size 638 K
Extended Memory size 58532 K
IO Channel type PCI



Drive Information:
SIZE MODEL
--------- ---------------------
80 GB ST380011A


Serial Number = 5JVA30SF
Int13 Num = 80, PHYS CHS = 16383x16x63.
ParmTable CHS, Rsvd = 9728x255x63

PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
PRIMARY
1 NTFS 0 5098 41943
EXTENDED
2 NTFS 5099 9726 38069


Diagnostic Results:

Seagate DiagATA Quick Test Result: Passed
Recommendation:
The "Quick Test" is adequate for most situations.
Consider running the "Full Test" which
verifies each sector on the drive if you need to run a more
comprehensive diagnostic.



Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------

DIAGATA.EXE Version 3.07.40526ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.

-----------------------------------------------------------------
Timer Resolution: 0.000122
Short Test Begin: 09-Mar-2005 21:32:04
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST380011A
Serial Number: 5JVA30SF
Firmware Revision: 3.06
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 156295279 Sectors
Conductor Cable Reported
ID Method: CSEL
SMART Enabled
SMART Check: Passed
DST - Passed
PIO/DMA Data Compare
Total Bytes = 8151552
Estimated PIO Transfer Rates
Min: 2.35MB/s Max: 2.40MB/s Avg: 2.38MB/s
Estimated DMA Transfer Rates
Min: 72.99MB/s Max: 91.24MB/s Avg: 89.28MB/s
SMART Check: Passed
Short Test Passed: 09-Mar-2005 21:32:56
SMART Disabled


-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI

ATA Full Test Result: Passed



Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------

DIAGATA.EXE Version 3.07.40526ML
Copyright (c) 2002 by Seagate Technology, LLC. All rights reserved.

-----------------------------------------------------------------
Timer Resolution: 0.000122
Long Test Begin: 09-Mar-2005 21:32:58
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST380011A
Serial Number: 5JVA30SF
Firmware Revision: 3.06
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 156295279 Sectors
Conductor Cable Reported
ID Method: CSEL
SMART Enabled
SMART Check: Passed
Full Scan (0 to 156295279) - Passed
Elapsed Time: 49.90 Minutes
Estimated Internal Transfer Rates
Min: 1.54Mb/s Max: 342.10Mb/s Avg: 223.52Mb/s
PIO/DMA Data Compare
Total Bytes = 21826560
Estimated PIO Transfer Rates
Min: 2.32MB/s Max: 2.42MB/s Avg: 2.40MB/s
Estimated DMA Transfer Rates
Min: 72.95MB/s Max: 121.58MB/s Avg: 90.04MB/s
Long Test Passed: 09-Mar-2005 22:23:01
SMART Disabled


-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI



File Structure Test Result:

Partition 1 (NTFS (41.9 GB) ) Result: Failed with critical Errors


NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.

Partition 2 (NTFS (38 GB) ) Result: Failed with critical Errors


NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.



******************************************


Recommendation:
All selected physical diagnostics passed.

If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.

If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.




========================================================

NEKA MI NEKO POJASNI KO DOBRO POZNAJE HD DA LI JE ISPRAVAN?

---

Mozda sam ne strpljiv ,ali mislim da nije tesko pitanje za one koji znaju.
Poslao sam rezultate testa HD-a ....
Samo zelim da cujem misljenje o ovom mom HD-u od nekog ko se razume u ovu oblast.UNAPRED HVALA!

---