Problem sa DVD rezacem LiteOn ako moze pomoc HITNO

Problem sa DVD rezacem LiteOn ako moze pomoc HITNO 25.08.2004. u 00:45 · pre 269 meseci #1

Imam veliki problem sa dvd rezacem LiteOn. U pitanju je externi rezac LiteOn LDW411S.Problem sam imao sa prvim rezacem pa sam reklamirao i dodje opet novi takav (neotpakovan)i opet isto.Sad mi se javlja sumnja da je kod mene nesto lose. Pokusao sam na dva kompjutera ali bez uspeha! Kazu mi da ako je Windows nesto zajeban hoce da brlja rezac pogotovu DVD. Evo sta se desava. Ocita disk i kao pocinje da reze i posle nekoliko sekundi (mozda oko 30) napise kod Record State FAILED umesto da napuni baffer. Mislio sam da je problem sa firmwareom pa sam skinuo najnoviji sa proizvodjacevog sajat, ali sve je ostalo bez uspeha. Evo slika error reporta u attachu ako neko zna u cemu je greska neka mi pomaze pod hitno inace cu da odlepim od ovoga! Ovde cu da iskopiram error log fajl pa ako imte neko resenje pomazite!U attachu stavljam sliku prozora kod rezanja! Da napomenem nema veze da li se reze kompilacija ili se radi copy diska i u jednom i drugom slucaju je ista situacija!

Citat:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <LITE-ON DVDRW LDW-411S> Version: FS0J - HA 3 TA 0 - 6.3.1.17
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.3.1.17
Adapter driver: <d346prt> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHS2030AT atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R2312 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-R2312 E: CDRom0
Generic DVD-ROM F: CDRom1
LITE-ON DVDRW LDW-411S G: CDRom11
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 446MB (457712kB)
Free physical memory: 256MB (262988kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.8.2004
DVD-Copy on the fly
12:58:11 AM #1 Text 0 File Reader.cpp, Line 118
Reader running

12:58:11 AM #2 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW LDW-411S running

12:58:11 AM #3 Text 0 File DVDCopy.cpp, Line 271
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2073838 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)

12:58:11 AM #4 Text 0 File DVDCopy.cpp, Line 374
Max -1 tracks of 1 allowed to copy
1: 0 - 2073838 = 2073838, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

12:58:11 AM #5 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media

12:58:11 AM #6 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2073837 (460:51.12, 4050MB)

12:58:11 AM #7 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD DVD)

12:58:11 AM #8 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: LITE-ON DVDRW LDW-411S, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193

12:58:11 AM #9 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:58:11 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2073838 (2073838) = #2073838/460:51.13
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2073838 blocks [LITE-ON DVDRW LDW-411S ]
--------------------------------------------------------------

12:58:11 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [LITE-ON DVDRW LDW-411S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4247220224, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2073838 | lead-out | 1 | 0x00 | 0x41

12:58:11 AM #12 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 2x (2,770 KB/s)

12:58:11 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

12:58:11 AM #14 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 25:42,280 (1542280ms) -> OK

12:58:12 AM #15 Text 0 File DVDR.cpp, Line 1879
Recording mode: Sequential Recording Mode

12:58:12 AM #16 Text 0 File Mmc.cpp, Line 20401
Set BUFE: supported -> ON , SMART-BURN : ON

12:58:12 AM #17 Text 0 File DVDR.cpp, Line 2020
Start write address at LBA 0
DVD high compatibility mode: Yes

12:58:12 AM #18 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12:58:12 AM #19 Text 0 File DVDR.cpp, Line 4645
Drive: LITE-ON DVDRW LDW-411S
Book Type request: DVD-ROM
Changing the book type was finish with error code: 0

12:58:19 AM #20 Text 0 File Cdrdrv.cpp, Line 1294
00:58:19.302 - LITE-ON DVDRW LDW-411S\H3 T0 : Queue again later

12:58:43 AM #21 SCSI -500 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x09DE3000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

12:58:43 AM #22 SCSI -1114 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x09870000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00

12:58:43 AM #23 CDR -500 File Writer.cpp, Line 304
SCSI command aborted
LITE-ON DVDRW LDW-411S\H3 T0

12:58:43 AM #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

12:58:43 AM #25 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

12:58:44 AM #26 Text 0 File DVDR.cpp, Line 2256
EndDAO: Last written address was 31

1:05:41 AM #27 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

1:05:41 AM #28 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

1:05:41 AM #29 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 3/26/2003 8:20:16 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 12:02:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\d346prt.sys': Ver=3.46.0.0 built by: WinDDK, size=5248 bytes, created 3/12/2004 10:41:42 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Unapred hvala!

Potpis

Sk8eR

error report.JPG54.81k

Re: Problem sa DVD rezacem LiteOn ako moze pomoc HITNO 25.08.2004. u 01:42 · pre 269 meseci #2

Probaj da update-ujes Nero. Skoro se pojavila verzija 6.3.1.20. Mozda to resi problem. Kakvi su ti USB portovi na maticnoj? Da li je podrzan USB 2.0? Probaj da smanjis brzinu rezanja i vidi kako se tad ponasa rezac.

Re: Problem sa DVD rezacem LiteOn ako moze pomoc HITNO 25.08.2004. u 08:50 · pre 269 meseci #3

Nero mi je na jednom kompjuteru 6.3.1.2.0 pa opet nece ! USB je 2.0 i taj podrzava rezac, sta bi drugo moglo da bude!?Brzina je smanjena na minimum, nisam pokusao da je povecam na 4x ali ne verujem da ce da ima uticaja!

Potpis

Sk8eR

Re: Problem sa DVD rezacem LiteOn ako moze pomoc HITNO 25.08.2004. u 12:47 · pre 269 meseci #4

Primetio sam da ako prodje neku SCSI command radi. Mislim da je u tome problem! Ako neko zna cemu sluzi ta komanda i u cemu je problem neka mi kaze kako da ispravim to!Posle toga se pominje nesto (mislim da je adresa) H3 T0 !
Sve to pise i u log fajlu koji sam kopirao gore!

Poz.

Potpis

Sk8eR

Re: Problem sa DVD rezacem LiteOn ako moze pomoc HITNO 26.08.2004. u 04:43 · pre 269 meseci #5

Posto Windows XP nema adekvatne ASPI layer drajvere nadji ForceASPI na netu skini ga i instaliraj i onda probaj kako ce da radi rezac. To sto kaze SCSI command failed nema nikakve veze sa SCSI-em jer nemas SCSI uredjaj vec uredjaj koji se kaci preko USB-a.

Re: Problem sa DVD rezacem LiteOn ako moze pomoc HITNO 26.08.2004. u 18:20 · pre 269 meseci #6

Hvala ti sto se trudis, ali ne pomaze! Imao sam i te drajvere i nista! Sinoc sam reinstalirao sistem od nule, ali nisam nista dobio time! Ista stvar ista greska..........Nemam vise ideju sta da probam!

Poz.

Potpis

Sk8eR

Re: Problem sa DVD rezacem LiteOn ako moze pomoc HITNO 26.08.2004. u 22:33 · pre 269 meseci #7

Kao zanja opcija znaci preostaje prckanje po registry-ju. Probaj ovako:

U HKEY_CURRENT_USER\Software\Ahead\Nero - Burning Rom\General\ promeni vrednost BurnHighPriority sa 0 na 1.

Takodje promeni vrednost allocatecdroms sa 0 na 1 u entry-ju:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\

Resenje tvog problema se takodje moze naci na Microsoft-ovom Knowlwdge Base-u ali ne secam se tacno linka.

Re: Problem sa DVD rezacem LiteOn ako moze pomoc HITNO 26.08.2004. u 23:17 · pre 269 meseci #8

Prvi kljuc ga nema uopste kod mene!

Drugi sam naso ali ne znam ima li smisla menjati jedno bez drugog!?

I kako da resim problem prvog kljuca?!

Poz.

Potpis

Sk8eR

Re: Problem sa DVD rezacem LiteOn ako moze pomoc HITNO 27.08.2004. u 02:58 · pre 269 meseci #9

Uh izvini! Prvi DWARD value treba da sam da napravis i da mu das vrednost 1. Znaci napravis DWARD value BurnHighPriority u okviru HKEY_CURRENT_USER\Software\Ahead\Nero - Burning Rom\General\ i zadas mu vrednost 1. Onaj drugi kljuc promeni kako sam ti vec napisao. Mozes barem da probas.

Re: Problem sa DVD rezacem LiteOn ako moze pomoc HITNO 27.08.2004. u 06:57 · pre 269 meseci #10

Ja to nikad nisam pravio i ne znam da napravim.Baza registra i kljucevi su mi slaba strana , pa ako mozes malo bolje da mi objasnis! I jos nesto cu da kazem, sto mi se ucinilo(mozda i jeste tako) ali diskovi DVD+ ne pucaju i sa njima radi bez problema!Mozda gresim ali cini mi se da je tako! Jel moguce to uopste!?

Hvala!

Potpis

Sk8eR

Re: Problem sa DVD rezacem LiteOn ako moze pomoc HITNO 28.08.2004. u 15:40 · pre 269 meseci #11

PIVO ZA SVE!

Hvala Vam svima na trudu! Nisam menjao nista po registrima (ono prvo nisam znao), ali mogu da kazem da sam donekle resio problem! Neznam da li je to normalno(mislim da nije) ali moj rezac bez problema reze DVD+ bez problema! Nareze i poneki DVD- (mozda 1 od 6-7) ali je to zanemarljivo! Da li je neko imao slicna iskustva i do cega tu moze da bude:

1. do rezaca
2. njegovog firmware-a
3. do software-a (malo verovatno- jer sedesava sa svim softwareima sto sam probao
4. do diskova
5. ili nesto sasvim neobjasnjivo!

Ja cu da nastavim da rezem na DVD+ diskovima ali bi voleo da isteram stvar do kraja!

P.S. Negde na ovom forumu sam procitao lepo objasnjenu razliu izmedju dvd+ i dvd- diskova ali ne mogu da je nadjem pomocu search-a nikako. Ako neko zna gde je to neka postuje link ili neka napise naslov teme!

Hvala!

Potpis

Sk8eR

Srodne teme