[es] - CNC programiranje Strug

kikik
nezaposlen

Član broj: 183974
Poruke: 80
91.191.3.*

+19 Profil

^{07.02.2014. u 22:32 - pre 124 meseci}

Na prvoj je prikazan dio koji se izrađuje sa dimenzijama, a na drugoj ono za šta trebam da napišem g kod

Radim u Sinumerik 840d, demo verzija.

Glavni program (Bez bušenja rupa):

G54
TRANS Z120
LIMS=4000
T1 D1; PORAVNAVANJE ČELA
G96 S180 F0.1 M4
G0 X125 Z0
G1 X-1
G0 X125 Z1; GRUBO STRUGANJE
CYCLE95("GRUBO",2.5,0.1,0.5,0,0.2,0.001,0.001,1,0,0,0)
ZAMJENAALATA
T2 D1; ZAVRŠNO STRUGANJE
G96 S180 F0.1 M4
G0 X125 Z1
CYCLE95("GRUBO",0,0,0,0,0,0.001,0.001,0.1,5,0,0,0)
M30

Podprogram:

GRUBO

G1 X0 Z0
G3 X50 Z-5 I0 K5
G2 X60 Z-10 I5 K0
G1 X70
G1 X80 Z-25
G1 X90
G1 Z-37
G2 X106 Z-45 I8 K0
G1 X117
G1 X120 Z-46.5
G0 X125
M17

I kada pokrenem simulaciju izbaci mi grešku "Channel 1 block error in end point of circle -2067"

Pa ako može mala pomoć, bio bih zahvalan.

_{[Ovu poruku je menjao kikik dana 07.02.2014. u 23:44 GMT+1]}

Odgovor na temu

cirko

Član broj: 122475
Poruke: 553
217.16.136.*

+16 Profil

Re: CNC programiranje Strug

^{23.02.2014. u 17:23 - pre 123 meseci}

Nisam bio dugo na forumu zbog poslova
Ali evo da me ne kritikuju za Siemens 810
%
( 2-23-2014 )
N25 D1 ( TOOL 1 SW_TURN_80M_RH )
N30 G92 S4500
N35 G96 S243 M3
N40 M8 (MSG, ROUGH FACE FACE4 )
N45 G0 Z25.0
N50 X50.0
N55 Z3.0
N60 X126.0
N65 X124.0 Z-4.9
N70 G1 G95 X-2.0 F1.
N75 Z0.
N80 X-1.293 Z0.354
N85 G0 Z3.0
N90 (MSG, ROUGH TURN TURN3 )
N95 G92 S4500
N100 G96 S243
N105 X124.0Z3.0
N110 X126.0 Z-0.9
N115 X110.067
N120 G1 Z-49.9
N125 X115.0
N130 G3 X116.556 Z-50.222 B1.1
N135 G1 X119.556 Z-51.722
N140 G3 X120.0 Z-52.042 B1.1
N145 G1 X120.707 Z-51.688
N150 G0 Z-0.9
N155 G1 X100.133
N160 Z-49.624
N165 G2 X103.998 Z-49.9 B6.899
N170 G1 X110.067
N175 X110.774 Z-49.546
N180 G0 Z-0.9
N185 G1 X90.2
N190 Z-43.001
N195 G2 X100.133 Z-49.624 B6.899
N200 G1 X100.84 Z-49.27
N205 G0 Z-0.9
N210 G1 X80.2
N215 Z-29.9
N220 X88.0
N225 G3 X90.2 Z-31.0 B1.1
N230 G1 X90.907 Z-30.646
N235 G0 Z-0.9
N240 G1 X70.2
N245 Z-16.161
N250 X79.574 Z-29.9
N255 X80.2
N260 X80.907 Z-29.546
N265 G0 Z-0.9
N270 G1 X60.2
N275 Z-11.001
N280 G2 X62.42 Z-13.726 B3.902
N285 X67.817 Z-14.9 B3.898
N290 G3 X69.848 Z-15.645 B1.1
N295 G1 X70.2 Z-16.161
N300 X70.907 Z-15.808
N305 G0 Z-0.9
N310 G1 X54.1
N315 Z-5.717
N320 G3 X60.2 Z-11.0 B6.099
N325 G1 X60.907 Z-10.647
N330 G0 Z-0.9
N335 G1 X48.0
N340 Z-4.9
N345 G3 X54.1 Z-5.717 B6.099
N350 G1 X54.807 Z-5.363
N355 G0 X126.0
N360 Z3.0
N365 X50.0
N370 Z25.0
N375 M9
N380 M1

N385 D2 ( TOOL 2 TD_M2400:T )
N390 G95 S1734 M3
N395 M8 (MSG, DRILL HOLE1 )
N400 G0 Z25.0
N405 X50.0
N410 Z3.0
N415 X0.
N420 G1 Z-24.0 F0.
N425 G0 Z3.0
N430 Z-21.0
N435 G1 Z-48.0
N440 G0 Z3.0
N445 Z-45.0
N450 G1 Z-72.0
N455 G0 Z3.0
N460 Z-69.0
N465 G1 Z-87.11
N470 G0 Z3.0
N475 X50.0
N480 Z25.0
N485 M9
N490 M1

N495 D3 ( TOOL 3 COPY OF WN_B_SMALL_80M_RH )
N500 G92 S4500
N505 G96 S243 M3
N510 M8 (MSG, ROUGH BORE BORE1 )
N515 G0 Z25.0
N520 X50.0
N525 Z3.0
N530 X33.8
N535 Z-2.0
N540 G1 Z-49.9 F1.
N545 X24.0
N550 X23.293 Z-49.546
N555 G0 Z-2.0
N560 (MSG, FINISH BORE BORE1 )
N565 G92 S4500
N570 G96 S365
N575 X23.293Z-2.0
N580 X34.0
N585 G1 Z-50.0 F1.
N590 X26.0
N595 X20.343 Z-47.172
N600 G0 X18.0
N605 Z2.0
N610 X50.0
N615 Z25.0
N620 M9
N625 M1

N630 D1 ( TOOL 1 SW_TURN_80M_RH )
N635 G92 S4500
N640 G96 S365 M3
N645 M8 (MSG, FINISH FACE FACE4 )
N650 G0 Z25.0
N655 X50.0
N660 Z3.0
N665 X126.0
N670 Z-5.0
N675 G1 X-2.0 F1.
N680 X3.657 Z-2.172
N685 G0 Z3.0
N690 (MSG, FINISH TURN TURN3 )
N695 G92 S4500
N700 G96 S365
N705 X124.0Z3.0
N710 X126.0 Z-5.001
N715 X40.0
N720 G1 X48.0 Z-5.0
N725 G3 X60.0 Z-11.0 B5.999
N730 G2 X62.277 Z-13.796 B4.002
N735 X67.812 Z-15.0 B3.998
N740 G3 X69.658 Z-15.677 B1.0 F0.
N745 G1 X79.431 Z-30.0
N750 X88.0
N755 G3 X90.0 Z-31.0 B1.0 F0.
N760 G1 Z-43.001
N765 G2 X103.998 Z-50.0 B6.999
N770 G1 X115.0
N775 G3 X116.414 Z-50.293 B1.0 F0.
N780 G1 X119.414 Z-51.793
N785 G3 X120.0 Z-52.5 B1.0 F0.
N790 G1 Z-74.5
N795 X125.657 Z-71.672
N800 G0 X126.0
N805 Z3.0
N810 G0 X50.0
N815 Z25.0 M09
N820 M01
N825 M30

Odgovor na temu