[es] - Pro/Engineer wildfire 5

kakavtakav
Soko Sokolovic
Loynica, Srbija

Član broj: 233140
Poruke: 15
*.birac.ba.

Profil

^{25.10.2011. u 08:13 - pre 151 meseci}

Pozdrav svima.

Instalirao sam Pro/ENGINEER WF 5, i u delu assmbly kada hocu da modeliram cevovod ( pipe )
sve radi ok ali nemam paletu sa standardnom opremom kao sto su slavine, prirubnice, ventili, zasuni i drugo.
Na internetu sam gledao prezentacije kako modeliraju cevovode i u opciji - ikonici fitting pojavi im se prozor sa standardnom opremom za cevovode. E ja kad izaberem tu ikonicu fitting, nista ne dobijam.
Molim Vas da mi kazete u cemu je problem, program sam instalirao full i pecovao sve kako treba. Zasto ja nemam tu standardnu opremu kao sastavni deo programa?

Hvala unapred svima.

Odgovor na temu

cirko

Član broj: 122475
Poruke: 553
93.184.88.*

+16 Profil

Re: Pro/Engineer wildfire 5 - problem

^{25.10.2011. u 20:57 - pre 151 meseci}

Verovatno nemas biblioteku standardnih delova
ili je negde iskljuceno u podesavanjima
Poz

Odgovor na temu

NePitajteMene
MechEng,Project Engineer, CatiaV5 Design
Engineer for military vehicles
BG,Srbija...for now

Član broj: 244329
Poruke: 185

+21 Profil

Re: Pro/Engineer wildfire 5 - problem

^{26.10.2011. u 12:27 - pre 151 meseci}

Biblioteke standardnih delova za Pro/E nisu deo instalacionog paketa, skidaju se sa sajta posle login-a za korisnike-musterije (customer account) koji imaju nalog (verovatno samo legalni korisnici, mada ko zna...;-)) i naknadno se instaliraju, uz prethodno konfigurisanje Pro/E-a da zna odakle da ih "povuce" nakon instalacije

To su paketi:

MED-6XX-CD-330_2002490_CONNECTOR.zip
MED-6XX-CD-330_2002490_ELECTRICAL-SYMBOL.zip
MED-6XX-CD-330_2002490_GRAPHICS.zip
MED-6XX-CD-330_2002490_MOLDBASE.zip
MED-6XX-CD-330_2002490_PIPE-FITTING.zip-ova je ona biblioteka koja tebi treba (fitinzi i cevovodi, cevna armatura...)
MED-6XX-CD-330_2002490_PIPING-HEATING.zip
MED-6XX-CD-330_2002490_TOOLING.zip

Evo linka na engleskom kako konfigurisati Pro/E i nakon instalacije biblioteka kako da se pojave njihovi meniji integrisani u Pro/E-jer to su u osnovi extenzije/dodaci-add-onovi za Pro/E:

http://www.cadcam.com.au/component/idoblog/viewpost/70

Pozz

The eye through which I see God is the same eye through which God sees me; my eye and God's eye are one eye, one seeing, one knowing, one love.

Odgovor na temu

kakavtakav
Soko Sokolovic
Loynica, Srbija

Član broj: 233140
Poruke: 15
*.teol.net.

Profil

Re: Pro/Engineer wildfire 5 - problem

^{26.10.2011. u 20:52 - pre 151 meseci}

Pozdrav Cirko, pozdrav NePitajteMene.
Hvala vam puno na odgovorima

Mozda ja nisam bio dovoljno precizan ali ja imam instalirane te standardne delove u Program Files-u kao sastavni deo programa, sve vrste prirubnica ( ravne, grlate... ) vijke, navrtke, slavine, zasune i ventile, cak mogu da ih otvorim.
Ali mi nikako ne polazi za rukom da ih nekako povezem pa da ih direktno ucitavam preko opcije ''fitting'' kao sto bi to trebalo tako. U Pro/ENGINEER-ovom helpu sam citao o tome ali nikako da ih postavim kao sto hocu.

If you have set the piping_schematic_driven configuration option to yes, the Schematic Driven option is available. The XML file associated with the selected pipeline is also displayed. To insert a fitting using the Schematic Driven option, perform the following step:
Select an active Fitting icon and select a Selection name from the list.
The Designator box displays the ref_des value of the selected fitting.

piping_schematic_driven
no*, yes
Enable or disable the schematic-driven modeling.
● yes—Enables the schematic-driven modeling options in pipeline creation, pipeline routing, and fitting insertion.
● no—Disables the schematic-driven modeling options.

1. Click Tools ▶ Piping ▶ Designation. The Pipeline Designation dialog box opens.
2. Under Designate Pipeline, click OPEN icon and select an existing pipeline.
3. Under Schematic, click to select the appropriate XML file from the directory specified by the piping_schematic_xml_dir configuration option. You can also select an XML file from any other directory.
4. Select the appropriate schematic label to associate the Pro/ENGINEER pipeline with the schematic pipeline.
5. Under Constrict Assembly, the top level assembly is selected by default to search for the components. Click to select another assembly to restrict the search of the components.
6. Click Reload to reload or refresh the schematic information from the XML file for the selected designated pipeline.

Ovo sve pise u njegovom helpu kako ubaciti fitting, odradim ja ovako ali nece nikako. Ne znam stvarno gde gresim.

U trenutku dok ovo pisem nisam se mogao konektovati na sajt koji mi je ostavio g-din NePitajteMene ali pokusacu kasnije jos i tu varijantu.

Cirko ; NePitajteMene da li Vi imate te palete standardnih elemenata i da li ste imali slicnoh problema?

Unapred hvala

Odgovor na temu