Kad sa ostalim TS parametrima imamo i dati Vas ili litrazu kutije,jel to znaci da toliko treba da iznosi unutrasnji volumen kutije,odnosno da je fabrika nerenja na tom zvucniku vrsila sa tom litrazom i da je to optimum?
Nasao sam ovo ali mi bas najasnije nije:
Vas
Measured in litres (L) or cubic metres, is a measure of the 'stiffness' of the suspension with the driver mounted in free air. It represents the volume of air that has the same stiffness as the driver's suspension when acted on by a piston of the same area (Sd) as the cone. Larger values mean lower stiffness, and generally require larger enclosures. Vas varies with the square of the diameter. A typical factory tolerance for Vas spec is ±20–30%.
Moze li kratko pojasnjenje,odnosno odgovor na moje pitanje?
Pozzz!
Nasao sam ovo ali mi bas najasnije nije:
Vas
Measured in litres (L) or cubic metres, is a measure of the 'stiffness' of the suspension with the driver mounted in free air. It represents the volume of air that has the same stiffness as the driver's suspension when acted on by a piston of the same area (Sd) as the cone. Larger values mean lower stiffness, and generally require larger enclosures. Vas varies with the square of the diameter. A typical factory tolerance for Vas spec is ±20–30%.
Moze li kratko pojasnjenje,odnosno odgovor na moje pitanje?
Pozzz!
Potpis
Blago onome ko zna da ne zna, a hoce da zna.
Covek se uci dok je ziv, pa opet lud umre.
Covek se uci dok je ziv, pa opet lud umre.