[es] - Ne mogu da upalim HTC Touch Pro nakon instaliranja novog ROM-a

Bez imena
Stevica Zeljkovic

Član broj: 171433
Poruke: 22
*.static.zrlocal.net.

Profil

Ne mogu da upalim HTC Touch Pro nakon instaliranja novog ROM-a

^{08.04.2010. u 23:43 - pre 170 meseci}

Molim nekog da mi pomogne.
Upravo sam ubacio novi rom u HTC TPro i nakon toga ne mogu da ga upalim i nema vezu sa racunarom tako da ne mogu da reinstaliram WM.
Ne znam sta da radim. Po nekad se upali i na ekranu ispise Touch Pro i samo tako stoji, reaguje na reset ali se opet isto desava.
Pre toga je radio odlicno pod WM 6.5 build 23529, ali ja hocu da probam novu verziju i eto!
Sta da radim, molim vas za odgovor!!!

Odgovor na temu

voodoons
Administrator
www.pcaxe.com
Novi Sad

Član broj: 89087
Poruke: 32
*.dynamic.sbb.rs.

Sajt: www.pcaxe.com

Profil

Re: Ne mogu da upalim HTC Touch Pro nakon instaliranja novog ROM-a

^{26.06.2010. u 13:58 - pre 168 meseci}

Da li si uradio Hard SPL pre flesovanja? Koji ROM si probao da uguras u njega, zvanicni ili neki Custom ROM?

Udji u bootloader na nacin:
**To enter Bootloader and check HardSPL version; with the device turned OFF, press and hold the volume down button, then press the reset button with the stylus. Release the volume down button when bootloader tricolour screen appears**

Ako ulazis u bootloader i ako si uradio Hard SPL pre flesovanja tog roma sto ti je ubio tel, skini neki drugi custom ili zvanicni ROM i isprati proceduru za flesovanje sa memorijske kartice a ona glasi:
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 using a PC (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Raphael Rom Develpoment Page and unzip/unrar it to your computer
3. Goto the Roms Folder and rename the .nbh file to RAPHIMG.nbh
4. Copy the RAPHIMG.nbh file to the root of your microSD Card
5. Remove Sim Card and Restart phone
6. Plug the microSD Card into the phone
7. Press and hold the volume down button, then press the reset button with the stylus. Release the volume down button when bootloader tricolour screen appears
8. Follow the onscreen instructions to start flashing
9. Once phone finishes flashing and says Update Complete, reset with the stylus
10. When it gets to the screen where it configures the stylus, HARD RESET
(hold the VOLUME DOWN and ENTER (center) Buttons, press the RESET button with the stylus tip, then release the RESET button but continue to hold the VOLUME DOWN and ENTER buttons until the reset screen appears)
11. Follow onscreen instructions to set up your New Rom

Ako nisi uradio Hard SPL, moras skinuti zvanicni ROM pa probati da ga flesujes sa mem.kartice na isti nacin kao i custom ROM...
EDIT:
videh sad da je tema od pre dva meseca, ali eto, moze pomoci nekom drugom, posto pretpostavljam da je za dva meseca resen problem a nije napisano kako..

NOKIA SL3 Unlock
skypename: voodoons
sekira

Odgovor na temu