Nokia 6210 navigator- nece da se ukljuci

Na 6210 navigator sam instalirao novu verziju Garmina!
Telefon je posle toga raskacen bez odjave (ako to ima veze) , dete mi je izvuklo USB iz kompa!
Vadio sam bateriju, malo ocistio tel od prljavstine i ukljucio ga, ali samo se zacuje vibracija i malo zasvetli ekran i nista se vise se ne desava!
Probao sam da ga flesujem preko J.A.F programa i evo slike kako izgleda finis, nema upisanog koda i verzije softvera.

Nemoj se ljutiti, ali cu ti skrenuti paznju na par stvari :

1. Ovo ti je posledica koriscenja krekovanih stvari koje polovicno ili nikako ne rade (krekovani originalni servisni programi)
2. Ubacivanjem krekovanih programa u telefon neces dobiti uvek zeljen rezultat (ziv telefon)

E sada ovako :

Posto koristis krekovani JAF, i flesujes ga preko USB-a, neces moci dobiti zeljeni rezultat (ziv telefon). Da bi ga kvalitetno i dobro odradio, moras imati FBUS interface. Elem, da bi mogao koristiti FBUS interfejs, moras imati ili originalni JAF dongle sa interjfejsom, ili neki od drugih uredjaja koji su poooodosta skupi i nisu isplativi u kucnoj radinosti.

Jedino na FBUS ga mozes vratiti u zivot. Iz loga ti ne vidim IMEI, dali je u redu, jer ako nije, onda si "sredio" telefon na "duze" staze.

Naravoucenije : Ne verujte svakom ko pise na netu da se moze SVE uraditi u kucnoj varijanti sa krekovanim softverom i programima.

P.S. Kako znam da koristis krekovani soft (JAF) i Garmin ? Pa zato sto originalna verzija izgleda drugacije i otvorena ti je opcija FBUS ! A Garmina si ubacio (krekovanog) jer nebi placao licencu (legalnu) nekome, vec krek u kucnoj varijanti ?

JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.0.2.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-367\

Searching for default location of ini...
Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\
Scanning ini files...
Searching for default location of ini...
Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_core.fpsx
PPM Flash file: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_v03_01_scandinavia.fpsx
CNT Flash file: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_vc00_01_Navigator.fpsx
APE Variant file: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_uda.fpsx
Languages in ppm: English,Finnish,Swedish,Norway,Islandic,Danish
Changing flashing settings...
Searching for default location of ini...
Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_core.fpsx
PPM Flash file: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_v07_01_balkans.fpsx
CNT Flash file: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_vc00_01_Navigator.fpsx
APE Variant file: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_uda.fpsx
Languages in ppm: English,German,Croatian,Serbian,Greek
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 007.016.022
Elf2flash 08.37.001
CMT RAW loader...
Sending RAW Loader...
....................Loader Sent!
Stage 2 starting.............Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Status byte: 8000
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 870, APE blocks: 0
Erasing cmt...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_core.fpsx...
Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
Erasing cmt zone 00083400 - 0087FFFF ... Erase result: 0000
Erasing cmt zone 00B80000 - 080FFFFF ... Erase result: 0000
Partition result: 0014
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_v07_01_balkans.fpsx...
Erasing cmt zone 053E0000 - 078FFFFF ... Erase result: 0000
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_vc00_01_Navigator.fpsx...
Erasing cmt zone 07900000 - 080FFFFF ... Erase result: 0000
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_uda.fpsx...
Erasing cmt zone 08100000 - 0F8BFFFF ... Erase result: 0000
Send CMT CFG...

Writing cmt...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_core.fpsx...
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS+CORE
Sending CMT HASH for SOS+ROFS1
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_v07_01_balkans.fpsx...
Sending CMT HASH for SOS+ROFS2
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_vc00_01_Navigator.fpsx...
Sending CMT HASH for SOS+ROFS3
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_uda.fpsx...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
Phone not found...
Done!
Backing up CRT...
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
Failed to backup CRT...
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 007.016.022
Elf2flash 08.37.001
CMT RAW loader...
Sending RAW Loader...
....................Loader Sent!
Stage 2 starting.............Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Status byte: 8000
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 870, APE blocks: 0
Erasing cmt...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_core.fpsx...
Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
Erasing cmt zone 00083400 - 0087FFFF ... Erase result: 0000
Erasing cmt zone 00B80000 - 080FFFFF ... Erase result: 0000
Partition result: 0014
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_v07_01_balkans.fpsx...
Erasing cmt zone 053E0000 - 078FFFFF ... Erase result: 0000
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_vc00_01_Navigator.fpsx...
Erasing cmt zone 07900000 - 080FFFFF ... Erase result: 0000
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_uda.fpsx...
Erasing cmt zone 08100000 - 0F8BFFFF ... Erase result: 0000
Send CMT CFG...

Writing cmt...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_core.fpsx...
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS+CORE
Sending CMT HASH for SOS+ROFS1
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_v07_01_balkans.fpsx...
Sending CMT HASH for SOS+ROFS2
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_vc00_01_Navigator.fpsx...
Sending CMT HASH for SOS+ROFS3
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-367\rm367_05.16_prd_uda.fpsx...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
MCUSW: (null)
APESW: (null)
VariantSW: (null)
Prodcode:
Done!

Superiska, dobio si upaljen telefon (mislis da si resio problem ?)......... ;)

Nisam dobio upaljen telefon i dalje je mrtav

Pa ovo govori da je sve ok, daj log iscitan sa INFO dugmetom !

Tel. je danas bio u servisu i nisu uspeli da ga "probude"
Sta raditi sad sa njim ?
Ima li kakve sanse?

Pozdrav!
ajde pisi mi na mail pa da probamo da ga resimo.....
Ubio si ga ko zeca :D

"Tel. je danas bio u servisu i nisu uspeli da ga "probude""

Promeni sevis,ovi su izgleda od onih sto na vratima samo pise "servis", a o cemu ja procam "vazdan" po forumu !

Posle nekoliko pokusaja situacija je ovakva!
Telefon se sada budi i radi ali mora da se saceka bar 10 min da bi mogao da se ukljuci!
Znaci fon radi i kada ga ugasim ne moze da se ukljuci sve dok malo ne odrema, bar 10-15 min i onda se pali!
:) Postao je prava lenstinja ! :)
Momak koji ga je radio sumnja na procesor!