Instalacija ISDN modema na Mandrake linuxu 9.0Citat:
Q1: How can I install IA-128P to Linux?
Our ISDN PCI card IA-128P use either "Winbond 6692" or "Cologne HFC-S PCI" chipset.
Linux kernel 2.2.13 or later have built-in its driver. In general, you should recompile the kernel to add its driver to the kernel. For example, run "make xconfig" in X windows to add its driver then compiles the kernel to use. (Under the ISDN subsystem, enable "Hisax Support for Winbond W6692" or "HiSax Support for HFC PCI-Bus cards")
By the way, you can also use command "ismod hisax type=35" for HFC-S PCI card or "ismod hisax type=36" for Winbond 6692 card to insert the hisax driver module.
After the hardware is now installed, and you can go on configuring your system to use that hardware.
Our ISDN PCI card IA-128P use either "Winbond 6692" or "Cologne HFC-S PCI" chipset.
Linux kernel 2.2.13 or later have built-in its driver. In general, you should recompile the kernel to add its driver to the kernel. For example, run "make xconfig" in X windows to add its driver then compiles the kernel to use. (Under the ISDN subsystem, enable "Hisax Support for Winbond W6692" or "HiSax Support for HFC PCI-Bus cards")
By the way, you can also use command "ismod hisax type=35" for HFC-S PCI card or "ismod hisax type=36" for Winbond 6692 card to insert the hisax driver module.
After the hardware is now installed, and you can go on configuring your system to use that hardware.
Ovo pise na njihovom sajtu ali ja sam totalni laik sto se tice linuxa. Ne znam ni jednu komandu za konzolu
.Ovo i nije bas za moj modem, ali neki lik iz tehničke podrške mi je rekao da i za moj modem postoje drajveri vec ugradjeni i da pratim uputstva sa sajta.
Pomozite molim vas
.
