Pheenet WL-118C+, ap/client bridge, b, 23 dBm

WL-118C+
IEEE802.11b AP / AP Client, 200mW, Detachable

PheeNet WL-118C+ is an IEEE 802.11b 11Mbps AP/AP Client with 2.4 – 2.484 GHz Frequency. Its 64/128-bit WEP Encryption provides security to network data transmission, and also has Disable SSID Broadcast, MAC Address Filter features. WL-118C+ equipped with Dipole Antenna with 2dBi Gain (Reverse TNC Connector) and its 23dBm (200mW)-FCC & 20dBm (100mW)-CE enables user to build a convenient, efficient, and bigger coverage wireless network. Moreover, the WL-118C+ can be set as AP and AP Client, compatibilities of Win 95/98,WinNT,Win2000,WinME, and Win XP operation systems provide more flexibility and mobility to users.For home users and small enterprises, it is no doubt that WL-118C+ is an ideal device to build a wireless LAN
network

APPLICATION
Infrastructure Mode (AP) AP Client Mode

Features
1.Compatible with IEEE 802.11b 11Mbps
2.Supports wireless data encryption with 64/128-bit WEP for security
3.Provide Up to 23dBm(200mW) RF Output power
4.Provide splitter of POE Built-in
5.Provide Detachable Antenna with RP-TNC connector
6.Web configuration, management, and firmware upgrade

Specification

Industrial Standard
IEEE802.11b Compliant
Standard IEEE802.3 10BaseT Ethernet
IEEE802.3u 100BaseTX Fast Ethernet

Interface 10/100Base-TX (RJ-45) x 1

64/128-bit encryption

Security SSID Broadcast Disable function

MAC address filtering(ACL)

RF
Frequency Band 2.400~2.484 GHz ISM band
Signal Type Direct Sequence Spread Spectrum (DSSS)
Modulation DBPSK, DQPSK, CCK
Antenna Detachable Antenna with 2dBi gain (RP-TNC connector)
Sensitivity -90dBm@11Mbps
Output Power 23dBm
Channel
FCC: 11 Channels (US, Canada)
ETSI: 13 Channels (Europe)
TELEC: 14 Channels (Japan)

Features
AP
Operating Mode AP Client
Bridge
POE Splitter of POE Built-in
Management Web configuration

Hardware
Operating Temperature:0~55℃
Environment Storage Temperature:-20~80℃
Humidity: 5%~95%(non condensing)
Power Supply DC 12V/1000mA
LED Indicators Power, Act/Link, wireless
Dimensions 125(L)×108(W)×31(H) mm
Certificate FCC, CE

Ima problem sa ovim uredjajem. Kada mu ukljucim WEP, ne uspevaju klijenti da se povezu na njega. Probao sam sa Ovislink WL1120AP i Dlink DWL900AP+. Bez WEP sve sepovezuje bez problema ali sa WEP nema sansi.

Ima li tu nekog resenja?

Firmver je 1.9.0(A). Dao si mi nadu da mozda ima sanse da ovo namestim.

Gde si nasao taj firmware? Na Pheenet sajtu su izgleda potpuno izbacili ovaj uredjaj. Nemaju nikakvu podrsku za njega.

E da, nisma primetio da si mislio na g+

Najnoviji firmver koji sam nasao je Senao i moze se preuzeti sa http://www.wisp-router.com/dow...ware/2611cb3plusDLX-frm200.zip

Jos jedna kvaka sa ovim uredjajem je sto je predvidjen za americko trziste i ne radi na kanalima iznad 11-og. Ako izaberete visi kanal AP ce raditi na trecem iako ce u setup-u pisati da je na kanalu koji ste izabrali.