Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.

logovanje na 98?????

[es] :: Windows desktop :: logovanje na 98?????

[ Pregleda: 4349 | Odgovora: 18 ] > FB > Twit

Postavi temu Odgovori

Autor

Pretraga teme: Traži
Markiranje Štampanje RSS

^:^

Član broj: 48162
Poruke: 34
213.137.127.*



Profil

icon logovanje na 98?????11.02.2006. u 23:18 - pre 220 meseci




Ljudi kako se iskljucuje na 98 logovanje kod podizanja sistema sta sve nisam pokusao i nece?Otkacim ga Esc-om ali nije to to.I sta standarna 98 treba da ima u startup-u bez naknadnih dodavanja???
Sigurno ima postova ali nemam time za net a ovaj 041 ...no coment
Hvala!!!
 
Odgovor na temu

^:^

Član broj: 48162
Poruke: 34
213.137.127.*



Profil

icon Re: logovanje na 98?????15.02.2006. u 23:05 - pre 220 meseci


Bas vam hvala na pomoci!
 
Odgovor na temu

calexx

SuperModerator
Član broj: 71794
Poruke: 20046



+1651 Profil

icon Re: logovanje na 98?????15.02.2006. u 23:22 - pre 220 meseci
Šta se odmah ljutiš, pa problem i nije neki problem, samo malo smeta. Probaj da kreiraš usera bez lozinke, čini mi se da je u takvim situacijama ulazio bez pitanja. Ili uzmi neki tweak program i tamo podesi da se sam loguje.
 
Odgovor na temu

^:^

Član broj: 48162
Poruke: 34
213.137.127.*



Profil

icon Re: logovanje na 98?????15.02.2006. u 23:34 - pre 220 meseci



Ma zasto bi se ljutio niko nije obavezan da odgovori na moje pitanje zar ne>>>
Ipak hvala tebi!!!!


A malo nervoze ima jer pogledaj koliko je ljudi pregledalo temu niko ni da posavetuje pa makar i ono najgore npr. bilo je ovih tema,potrazi malo,googlaj itd ..
Ponekad se covek upita koja je svrha milionitog broja raznoraznih foruma i na .............. nije bitno

HVALA ti jos jednom
 
Odgovor na temu

farstar

Član broj: 52375
Poruke: 107
*.vdial.verat.net.



Profil

icon Re: logovanje na 98?????16.02.2006. u 01:26 - pre 220 meseci
Zaboravljas da je danas broj ljudi koji koristi win98 mnogo manji nego recimo
2000-te godine i shodno sa tim znatno je manja sansa da ce ti neko reci
tacan postupak da resis svoj problem jer je jednostavno zaboravio, nikad se
nije susreo sa njim ili je davno znao kako da ga resi, ali sada nema racunar
sa win98 da bi proverio za par sekundi resenje i postovao ga ovde.

Da si postavio neko pitanje za WinXp odavno bi dobio odgovor.

Pre 10 dana sam odradio ono sto tebi treba na nekom kompu, resava se sa
par klikova misem, ali da ne bih lupao napamet danas cu da zapisem gde se
sta klikce jer cu biti blizu istog kompa i do veceras u ponoc dobices odgovor.
 
Odgovor na temu

^:^

Član broj: 48162
Poruke: 34
213.137.127.*



Profil

icon Re: logovanje na 98?????16.02.2006. u 23:28 - pre 220 meseci
OK..Cekam
Hvala
 
Odgovor na temu

Goran Mijailovic

Član broj: 12684
Poruke: 6907



+437 Profil

icon Re: logovanje na 98?????17.02.2006. u 00:48 - pre 220 meseci
Samo udaris enter a lozinku ostavis praznu
znaci kliknes na ok a ne cancel, pass ostaje prazan
ako ti ne uspe onda ovo:
http://support.microsoft.com/kb/q152104/
 
Odgovor na temu

farstar

Član broj: 52375
Poruke: 107
*.vdial.verat.net.



Profil

icon Re: logovanje na 98?????17.02.2006. u 02:07 - pre 220 meseci
Malo kasnim sa odgovorom, danas sam izasao iz kuce ujutru, a malopre
sam dosao kuci, odgovor stize za pola sata.
 
Odgovor na temu

farstar

Član broj: 52375
Poruke: 107
*.vdial.verat.net.



Profil

icon Re: logovanje na 98?????17.02.2006. u 02:54 - pre 220 meseci
Znaci na masini sa win98 koja nije imala kreiranog nijednog usera
(nije otvarala pre pojavljivanja desktopa dijalog za izbor usera)
sam danas kreirao dva usera, time sam ukljucio da se pojavljuje
dialog pre pojavljivanja desktopa, a potom sam uspesno iskljucio
dialog na sledeci nacin.

Control panel -> Users
dodaj dva nova usera, recimo pera i laza sa praznom sifrom.
Kada te pri kreiranju usera bude pitao da li da kopira desktop i sve
ostalo za novog usera ti cekiraj stavku
"Create new items to save disk space", da ne bi trosio prostor na disku.

Ovde ako te pita da restartuje racunar mogao bi da mu kazes No,
a kad dodas i drugog usera da preko
start -> shutdown computer -> restart
restartujes racunar.

Po restartu kada ponudi izbor usera ti idi na cancel i dobices desktop.

Zatim
Control Panel -> Network
Pod Configuration oznacis misem "Microsoft Network Logon", a ispod
u padajucem meniju izaberes "Windows logon" pa kliknes na dugme Ok.
(znaci zamenis "Microsoft Family logon" koji bi trebao da stoji sa
"Windows logon")

Kada te pita da restartuje racunar ti kazes No (obavezno !!!)

Zatim
Control Panel -> Passwords
Pod User Profiles cekiras "All users of this computer use the same
preferences and desktop settings", kliknes na ok, ako te pita da
restartuje kazes No.

Zatvori prozor Control Panel-a, idi na
start -> shutdown computer -> restart i vise se nece pojavljivati
meni za izbor usera pri ucitavanju windowsa.


 
Odgovor na temu

^:^

Član broj: 48162
Poruke: 34
213.137.127.*



Profil

icon Re: logovanje na 98?????17.02.2006. u 21:37 - pre 220 meseci
Uffff problem poslusao sam GORANA i otisao na http://support.microsoft.com/kb/q152104/
Uradim sve kako je tamo pisalo,restartujem komp i nece da mi podigne sistem .Obavestenje sa kompa je dugo ali u kratkim crtama bi znacilo kako je iz sistem.ini
nesto izbrisano i ako zelim da podignem sistem moram pritisnuti bilo koje dugme da bi se to iskopiralo.Nedostaje :

1] vnetsup.vxd

pritisnem neko dugme, onda trazi

2] vredir.vxd

pritisnem neko dugme, onda trazi

3] dfs.vxd

Nakon svih predhodnih postupaka obavestava me kako je sa kompa uklonjen
msnp32.dll pritisnem enter i tek onda podigne windows.


I sada klasicno trazenje pomoci !!!!Jer zna ko sta da radim jer moze da se popravi a da nerusim sistem .....

I za vas koji znate sta sam napisao gore posto ja ne znam u 2 recenice sta mi trazi?
 
Odgovor na temu

Goran Mijailovic

Član broj: 12684
Poruke: 6907



+437 Profil

icon Re: logovanje na 98?????17.02.2006. u 21:48 - pre 220 meseci
Citat:
Samo udaris enter a lozinku ostavis praznu

jesi uradio ovo??
Evo resenja prvo pitanje pa odgovori ;)

Citat:
Missing Vnetsup.vxd , Vredir.vxd, Dfs.vxd, Vserver in Win98
asked by seeyee on 04/10/2003 01:13AM PDT

Hi All,

I have the following problem, any 1 can help me without format my Hard disk
Currently I using windows 98.
Before go into windows came out 4 Messages, these 4 error messages are:


Cannot find a device file that may be need to run windows application.
The windows registry or SISTEM.INI file refers to this device file, but the device file no longer exists.

If you deleted this file on purpose, try uninstalling the associated application using its uninstall or setup program.

If you still want to use the application associated with this device file, try reinstalling that application to replace missing file.

Vnetsup.vxd


Cannot find a device file that may be need to run windows application.
The windows registry or SISTEM.INI file refers to this device file, but the device file no longer exists.

If you deleted this file on purpose, try uninstalling the associated application using its uninstall or setup program.

If you still want to use the application associated with this device file, try reinstalling that application to replace missing file.

Vredir.vxd


Cannot find a device file that may be need to run windows application.
The windows registry or SISTEM.INI file refers to this device file, but the device file no longer exists.

If you deleted this file on purpose, try uninstalling the associated application using it s uninstalled or setup program.

If you still want to use the application associated with this device file, try reinstalling that application to replace missing file.

Dfs.vxd


Cannot find a device file that may be need to run windows application.
The windows registry or SISTEM.INI file refers to this device file, but the device file no longer exists.

If you deleted this file on purpose, try uninstalling the associated application using its uninstall or setup program.

If you still want to use the application associated with this device file, try reinstalling that application to replace missing file.

Vserver



After i press 4 time Enter button.
Then my PC continue loading into windows but before load everything done, another error message came out again that is:


Unable to load the dynamic link library:
Msnp32.dll.

The system cannot find the file specified:
Microsoft Network


Citat:
Accepted Answer from Merete
Date: 04/11/2003 03:31AM PDT
Grade: A
Accepted Answer

seeing as your not really an expert by the sounds of it, how about something simple like, run the sfc from the start buton run> type in sfc,this will cheak your pc for corrupted files and will ask you to restore them. when done and fixed anything that needed that, cheak your system devices are there any yellow question marks? if so update any drivers as required. Or simply put your windows 98 cd in the rom and run setup from there, it won't effect your current programs only windows 98 will restore and hopefully fix all those missing dills. Keep your windows 98 cd in the rom when doing the sfc, also any cd's that may have drivers for your graphics card or network etc.
Another thought> type in misconfig from your start run button,go to startup> untick what you know windows doesnt need at the startup.reboot Try simple things first. Reagrds Merete


Ovaj je prvi prihvacen odgovor.

Ima ih jos

Citat:
Comment from sh0e
Date: 04/15/2003 09:00PM PDT
Comment

yah i think sfc will probably work.. as merete has talked about
but also reinstalling your networking components will probably fix this..
i suspect you chose skip file while installing networking components..

or if you want you may just extract each of those files individually
http://vil.nai.com/vil/systemhelpdocs/SFC.htm
gives information on using sfc to extract single files..
replace wsock32.dll with the system file you want to restore..
namely vredir.vxd or dfs.vxd or vserver.vxd or msnp.dll

Comment from mimicsu
Date: 04/23/2003 10:59PM PDT
Comment

Plz click accept answer next to the comment that helped you. This awards that user the pts & closes this thread. If a combo of answers helped you - post a ? for 0 pts in comm supp to split the points between the users: usr1 & usr1. If you still need help on this, respond & let us know.

Comment from Merete
Date: 04/24/2003 01:17AM PDT
Comment

Hi again Seeyee,
have you resolved it yet, as an add on, after you have correctly assessed that windows is working correctly, I would suggest you remove all your internet connection sharing settings, and start from the beginning for your internet connection sharing. Here is a link that shows a step by step guide on how to setup internet connection sharing for windows 98 2nd edition and any questions you have.
Regards Merete


http://compnetworking.about.co...2Fie5%2Ftopics%2FICS%2Fics.asp



Comment from seeyee
Date: 05/07/2003 01:26AM PDT
Author Comment

Thanks A lot

Comment from Merete
Date: 05/15/2003 05:55AM PDT
Comment

Glad to be of help, sorry to take so long to respond, been fairly busy formatting hdd's for other misfortunate soals. Thanks Again. Regards Merete

Comment from happispider
Date: 02/06/2004 03:52PM PST
Comment

I've got that error after an imcomplete network adapter or protocol (I forget which) installation... Try deleting whatever network adapter or protocol failed to install and reinstalling it. Hope this helps.

Comment from happispider
Date: 02/06/2004 07:43PM PST
Comment

oops that's redundant

Comment from gonzal13
Date: 02/09/2004 10:17AM PST
Comment

I had just the same problemappear afterI installed windows on a newly formatted HD.

Another way to obtain these drivers is first make a temp file under C:

Put your cd rom in
go to the dos mode through windows.
go to f:\win98 for example
type
extract.exe /a /L c:temp base4.cab dfs.vdx

The command will start at the first cab file and look through all the cabs to find dfs.vdx and then store it in Temp.

gonzal13 (Joe)

Comment from PauserRJ
Date: 03/23/2004 08:34PM PST
Comment

My solution is quicker: just uninstall and install again "Dialup adapter".

Comment from Merete
Date: 03/23/2004 11:47PM PST
Comment

Hi Guys this question has been finalised I think as he accepted my answer. Just a thought regards Merete

Accepted Answer from Merete
Date: 04/11/2003 03:31AM PDT

Comment from PauserRJ
Date: 03/24/2004 06:09AM PST
Comment

I apologize if I misinterpreted the rules of this board, but if further comments, after the question has been finalised are not appreciated, why do we have the "Post a comment" box still available?
Your solution "remove and reinstall all your internet connection sharing settings" does work. The point is that only a small percentage of users have ICS installed to begin with. Compare it with "dial up adapter" and you'll see that the proposed procedure to correct the problem does make sense.

Comment from Merete
Date: 03/26/2004 10:19PM PST
Comment

Maybe I was the hasty one PauserR. All comments of course should be valuable regardless, please excuse me if I sounded inconsiderate of your comments to help. regards Merete

Comment from PauserRJ
Date: 03/27/2004 05:28AM PST
Comment

Hi Merete! No hard feelings! I came here to learn and, eventually, teach. We're discussing technical issues. Any war, whatever it is, is out of question. Thank you for your last comment. Although it has nothing to do with the subject, it makes me willing to continue participating here.


Comment from liranp1
Date: 05/18/2004 02:18AM PDT
Comment

hi

if the problem with the vxd files happend to you after installing DirectX.

than you need to delete these files from the registry.

in the command line type "regedit" and search for the files name, and every time he finds one delete it.


Comment from imnajam
Date: 06/22/2004 11:09AM PDT
Comment

Hello Seeyee,

I looked at the above mentioned files and found that all are related to network, I guess that you have an ethernet card installed or related networking file missing.

Here is a list of the standard vxd files used by Win98.
Dfs.vxd used by Microsoft Networking
Javasup.vxd used by Microsoft Java
Msmouse.vxd used by Microsoft Mouse
Ndis.vxd used by Microsoft Networking
Ndis2sup.vxd used by Microsoft Networking
Ndiswan.vxd used by Microsoft Networking
Vnetsup.vxd used by Microsoft Networking
Vfixd.vxd used by Video Phone helper
Vnetbios.vxd used by Microsoft Networking
Vredir.vxd used by Microsoft Networking
Vserver.vxd used by Microsoft Networking

reference site URL:http://www.911networks.com/win9x_networking.htm

as to solve that problem in a easy way I would like to delete each and everything by right clicking network neighbourhood and choosing properties.....delete tcp/ip, netbeui, your ethernet card driver and everything.........after that you will be asked to restart your pc
restart than it will ask you to install or locate the driver for your ethernet card follow the steps and install the necessary protocols file and print sharing and TCP/IP, net beui and other as per your own requirement.

you might want to remove all networking component by going to Add/Remove programs than windows setup and untick the networking component or something relevent to networking and after restart install them again...

hopefully it will help you to solve the problem.....

if you face any problem or want any more clarification you are almost welcome :)

Greetings:)

Comment from michael9822
Date: 09/18/2004 05:55PM PDT
Comment

peace to the computer family I have seen the solution for the problem I have.cannot find a device file that maybe needed to run windows or windows applications.
the windows registry or system INI file refers to this device file. but the device file is no longer exists if you deleted this file on purpose try uninstalling the associated application usiing its unistall or setup program.

if you still want to use the application associated with this device file try reinstalling that application or replace the missing file. c:\progra~1\sysmantec\sysmevnet.386. now i did everything the solution said and i even reinstalled windows 98 in hopes that the file would be reinstalled back on the machine but it didn't work. is there anything else to do about this. need help with problem

thanks very much michael

Comment from gonzal13
Date: 09/18/2004 06:29PM PDT
Comment

Well I have Norton Aintivirus and Norton Firewall. I went to the Windows Explorer and here is what I have:
s32evnt1.dll
symevent.cat
syevent.inf
symevent.sys
SYMEVNT.386

Looks similar to what you seem to have generated by a norton program

I searched the registry and found it:

c:\program files\symantec

Thus If you look for it in the registry you should find your version also. Look to see if you have a Symantec folder with the sysmevnet.386.

If not, then remove it from the registry if you are not going to reinstall a norton product.

Slightly confused. Which norton products do you intend to reinstal or have you reinstall them?

gonzal13(joe)


Comment from michael9822
Date: 10/08/2004 04:39PM PDT
Comment

peace to the computer family

i need some serious help this time well i accidently delete a file out of the add and remove programs thinking it was file from another program.it was not. it was norton anti virus software. when i load the pc i get the message nav auto protect unable to determine the location of the configuration files.when i load any programs i get the blue screen.i tried unistalling and scandisk reg restore and all of that is there something else i can do to get past this. can someone help me with a solution.is there something i need to download in ms dos that will work as nothing else loads up on my machine.how can i take it off, and if it does come off will i find the configuration files.Iam understand this error to me that norton cannot find the configuration files which lead me to believe the configurations files is there norton just cannot location it.for some reason. need help asap
thanks so much michael9822 and peace to the whole family

Comment from gonzal13
Date: 10/08/2004 05:02PM PDT
Comment

peace to the whole family I like that comment:

It is under my impression since you awarded the points and your last statmnt asked another question, that it should be in the form of a new question.

One way to avoid retyping text is to Highlight th body of the complete text and comments hit ctrl c and then open up a new question. In the body click ctrl v. Ten highlight and deleate extraneous items. Just a suggestion, take not I did not read the compete text only your last comment.

gonzal13(joe)

ps If you are using Norton 4oo4, it is not compatable with win98.

Comment from michael9822
Date: 10/09/2004 06:51PM PDT
Comment

PEACE TO THE WHOLE COMPUTER FAMILY I HAVE ANOTHER PROBLEM WITH MY COMPUTER. I HAVE DELETED THE NORTON ANTI VIRUS SOFTWARE AT LEAST ONE PART OF IT ANYWAY TO GET RID OF THE ERROR I WAS GETTING BEFORE. BUT NOW I HAVE SOMETHING ELSE.1 I HAVE ALL OF MY ICON ON THE DESKTOP AND WHEN I GO TO THE ADD AND REMOVE PROGRAMS I DONT SEE ANYTHING IN THE BOX AT ALL NONE OF THE THINGS I HAVE I INSTALLED WHAT IS GOING ON.2 WHEN I CLICK ON ANY ICON IT DOES NOT LOAD UP AT ALL THE ONLY THING THAT LOADS IS YAHOO BUT I STILL CANNOT GET INTO ANYTHING.3 I WENT TO THE DEVICE MANAGER AND SHOW THAT THE PROCESSOR SUPPORT HAD A YELLOW EXCLAMATION MARK I ALWAYS LEARNED THAT WHEN YOU SEE THAT TO REMOVE IT RESTART OVER AND WINDOWS WILL DETECT IT. BUT IT DID NOT SO DOES THIS PROCESSOR SUPPORT HAVE SOMETHING TO DO WITH MY ICON NOT LOADING UP.AND IF IT DOES NOW DO I INSTALL IT. WHERE DO I GET THE DRIVER OR INFORMATION FOR THIS.?WHO IS THE MADER OF THIS PROCESSOR OR IS THIS SOMETHING I HAVE TO INSTALL OFF THE WINDOWS 98 SECOND EDITION WHICH IF IAM NOT MISTAKEN I DID READ THAT.I HAVE INSTALL WINDOWS 98 TWICE HOPING THAT THIS HELPS THE PROBLEM.BUT WHY CAN I SEE MY PROGRAMS IN THE ADD AND REMOVE DIALOG BOX. AND FOR ALL OF THOSE WHO HELP ME WITH MY LAST QUESTION THANKS SO VERY MUCH.I WILL CLOSE OUT MY QUESTIONS THE NEXT TIME.AS IAM ON SOMEONE ELSE PC.

THANKS VERY MICHAEL.

Comment from gonzal13
Date: 10/09/2004 06:59PM PDT
Comment

Since this is a new problem please post a new question. Also do not CAPITALIZE as this is shouting.

gonzal13(joe)

Comment from Broomer
Date: 10/31/2004 02:26AM PST
Comment

This might be old hats, apologies if it is.
You just need to add the File and print server to your networking.
I had the same problem setting up my Optusnet ADSL, the bugger at the time couldn't tell e what it was.
I've nutted it out now.

Regards,

Ka.

Comment from gonzal13
Date: 10/31/2004 07:51AM PST
Comment

Boy it is hard reading capitalized text!

Did you install windows on top of itself? In other words did you open up windows, inserted the cd rom, opened windows explorer, went to the cd rom. then to win98 folder and clicked on setup? This does not change any of the settings nor is data lost but does fix a multitude of ills that look as wierd problems.

gonzal13(joe)

Comment from dkdarrough
Date: 06/22/2005 05:21PM PDT
Comment

I am working on a computer that has the same problem message that starts this chain. Can not find device file.... vnetsup.vxd with multiple iterations. After this we get a .dll file missing and the system shuts down.

What can I do to get the system to run without having to format the hard drive?

Comment from Merete
Date: 06/22/2005 07:10PM PDT
Comment

your missing your modem drivers>>http://www.modem-drivers.com/drivers/78/78126.htm
I'd suggest go to safemode remove all devices ontowards modem, network card, remove the network card physically from the machine until you get the modem working ok.
Then reboot and download that driver for your modem, go to add new hardware and choose modem.
Do you have the mainboard manual for that machine? And the cd?
check your multi media audio drivers are all installed ok.
Download the file: Vnetsup.vxd
http://www.dynamiclink.nl/htmfiles/rframes/info_vxd/info_v/66.htm

how to run scan for corrupted files in windows 98 just scroll down to the pictures and heading for 98..
http://service1.symantec.com/s...nfo.nsf/docid/2001011114021106
Regards M


Citat:
Comment from hewittg
Date: 04/10/2003 04:49AM PDT
Comment

Check this and see if it helps

Glenn


http://support.microsoft.com/?kbid=166832

Comment from kumar_rakesh2
Date: 04/10/2003 10:12AM PDT
Comment

Hi!
As i Suppose u have installed any network servises or protocol and cancelled that or haven't completed that properly.What u have to do is that edit the system registry by exececuting the command from start run REGEDIT
find for those files ie.netsup.vxd ,vredir,Dfs.vxd,Vserver
nad delete that from the windows registry and save the registry.The problem of those files when u log on to windows can be solved by editing the file system.ini with almost same process. feel free to ask in case of trouble.

Bye
Kumar


 
Odgovor na temu

Goran Mijailovic

Član broj: 12684
Poruke: 6907



+437 Profil

icon Re: logovanje na 98?????17.02.2006. u 21:50 - pre 220 meseci
Citat:
type in misconfig from your start run button

mislio je na msconfig ;0)
 
Odgovor na temu

Goran Mijailovic

Član broj: 12684
Poruke: 6907



+437 Profil

icon Re: logovanje na 98?????17.02.2006. u 21:52 - pre 220 meseci
A zatim pogledaj ovo http://support.microsoft.com/?kbid=166832 i videces zbog cega ta greska nastaje kao i resenje.

 
Odgovor na temu

^:^

Član broj: 48162
Poruke: 34
213.137.127.*



Profil

icon Re: logovanje na 98?????17.02.2006. u 22:03 - pre 220 meseci


E super hvala vam svima na pomoci ali posto sam francuz celoga zivota sad cu ja lagano sa recnikom , pa ako nesto zaskripi pitacu..
 
Odgovor na temu

Goran Mijailovic

Član broj: 12684
Poruke: 6907



+437 Profil

icon Re: logovanje na 98?????17.02.2006. u 22:33 - pre 220 meseci
Ma nista ukucaj u polju run: sfc to ce da isproverava integritet fajlova i da trazi da instalira one koji su promenjeni ili nedostaju, treba ti install cd.
Samo polako i nemoj da zabrljas :D ... opet.
Kad zavrsi proveri u hardware manageru da nema neki zuti upitnik, ako ima update-uj drajvere.
itd ovo ce valjda biti dosta ;)
 
Odgovor na temu

^:^

Član broj: 48162
Poruke: 34
213.137.127.*



Profil

icon Re: logovanje na 98?????18.02.2006. u 01:12 - pre 220 meseci
Prvo sam uradio kako kaze farstar

Znaci na masini sa win98 koja nije imala kreiranog nijednog usera
(nije otvarala pre pojavljivanja desktopa dijalog za izbor usera)
sam danas kreirao dva usera, time sam ukljucio da se pojavljuje
dialog pre pojavljivanja desktopa, a potom sam uspesno iskljucio
dialog na sledeci nacin.

Control panel -> Users
dodaj dva nova usera, recimo pera i laza sa praznom sifrom.
Kada te pri kreiranju usera bude pitao da li da kopira desktop i sve
ostalo za novog usera ti cekiraj stavku
"Create new items to save disk space", da ne bi trosio prostor na disku.

Ovde ako te pita da restartuje racunar mogao bi da mu kazes No,
a kad dodas i drugog usera da preko
start -> shutdown computer -> restart
restartujes racunar.

Po restartu kada ponudi izbor usera ti idi na cancel i dobices desktop.

Zatim
Control Panel -> Network
Pod Configuration oznacis misem "Microsoft Network Logon", a ispod
u padajucem meniju izaberes "Windows logon" pa kliknes na dugme Ok.
(znaci zamenis "Microsoft Family logon" koji bi trebao da stoji sa
"Windows logon")

Kada te pita da restartuje racunar ti kazes No (obavezno !!!)

Zatim
Control Panel -> Passwords
Pod User Profiles cekiras "All users of this computer use the same
preferences and desktop settings", kliknes na ok, ako te pita da
restartuje kazes No.

Zatvori prozor Control Panel-a, idi na
start -> shutdown computer -> restart i vise se nece pojavljivati
meni za izbor usera pri ucitavanju windowsa.

I uspelo je sada se direktno loguje.
Sto se tice drugog problema isao sam start/ran/sfc/sve pretrazio i sve je ok
pa sam lutao i citao sa linkova koje ste postavili, da bih na kraju ubacio cd 98 i
nasao
vnetsup.vxd
vredir.vxd
dfs.vxd
prevukao tj. prekopirao u sistem i vise nema onih pitanja na pocetku sve je ok kako i zasto ne znam ali nema veze bitno je da radi.


Medjutim probao sam da prevucem i onaj msnp32.dll ali nece i kada dignem sistem pise sl:

Unable to load the dynamic link library.
msnp32.dll
The system cannot find the file specified.
Some or all of the following feature is not available

zatim polje OK enter i radi
Ima li nacina da msnp32 regulisem
Hvala na pomoci
 
Odgovor na temu

Goran Mijailovic

Član broj: 12684
Poruke: 6907



+437 Profil

icon Re: logovanje na 98?????18.02.2006. u 02:05 - pre 220 meseci
Citat:
RESOLUTION
NOTE: If you have previously set up Dial-Up Networking and have added items such as phone numbers, TCP/IP settings, and other protocols, record the information before you remove the Dial-Up adapter. Do the same for Network Adapter properties information if a network adapter is listed in Network properties. To resolve this problem, remove and then reinstall Dial-Up Networking. To do so, follow these steps:
1. Click Start, point to Settings, and then click Control Panel.
2. In Control Panel, double-click Add/Remove Programs.
3. Click the Windows Setup tab, and then click Communications.
4. Click Details, and then click to clear the Dial-Up Networking check box.

NOTE: If you receive the Ndiswan.vxd error message, click to clear the Virtual Private Networking check box only.
5. Click Close, click OK, then click Apply.
6. When you are prompted to restart Windows, do so.
7. Click Start, point to Settings, and then click Control Panel.
8. In Control Panel, double-click Add/Remove Programs.
9. Click the Windows Setup tab, and then click Communications.
10. Click Details, and then click to select the Dial-Up Networking check box.

NOTE: If you cleared the Virtual Private Networking check box in step 4, click to select it.
11. Click Close, and then click OK.
12. If you are prompted to restart Windows, do so.
If any additional protocols are necessary, add the protocols by using the Network tool in Control Panel.

NOTE: Check with your system administrator or Internet service provider to determine the required settings for Dial-Up Networking and TCP/IP.


 
Odgovor na temu

^:^

Član broj: 48162
Poruke: 34
213.137.127.*



Profil

icon Re: logovanje na 98?????19.02.2006. u 21:54 - pre 220 meseci


Samo das Vas obavestim da sam zahvaljujuci vasoj pomoci uspesno resio problem tj. vise njih .
Zahvaljujem se svima koji su pomogli i uopste ucestvovali u diskusiji...
 
Odgovor na temu

Goran Mijailovic

Član broj: 12684
Poruke: 6907



+437 Profil

icon Re: logovanje na 98?????19.02.2006. u 23:33 - pre 220 meseci
Molim lepo :)
 
Odgovor na temu

[es] :: Windows desktop :: logovanje na 98?????

[ Pregleda: 4349 | Odgovora: 18 ] > FB > Twit

Postavi temu Odgovori

Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.