Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.

{Mandriva 2008} Via Rhine 2 problem

[es] :: Linux hardware :: {Mandriva 2008} Via Rhine 2 problem

[ Pregleda: 2213 | Odgovora: 6 ] > FB > Twit

Postavi temu Odgovori

Autor

Pretraga teme: Traži
Markiranje Štampanje RSS

golden eye

Član broj: 118762
Poruke: 331
93.87.219.*



+7 Profil

icon {Mandriva 2008} Via Rhine 2 problem12.06.2009. u 18:58 - pre 180 meseci
Zdravo,
imam problem sa Via Rhine II mreznom karticom za Mandrivu 2008.
Kada se ukljuci racunar mreza radi uredu medjutim nakon 10ak minuta upotrebe jednostavno prestane sa radom
( i internet i lan).

Kako ovo da resim?
Pozdrav
 
Odgovor na temu

madcama
Valjevo

Član broj: 103936
Poruke: 794
*.rcub.bg.ac.yu.



+184 Profil

icon Re: {Mandriva 2008} Via Rhine 2 problem12.06.2009. u 19:06 - pre 180 meseci
Kako se ponasa pod nekom drugom verzijom Mandrive, pod nekom drugom distribucijom i nakraju kako se ponasa na nakom drugom operativnom sistemu?

Probaj i sa nekog live CD-a.
Po temi http://www.elitesecurity.org/t385534-0 ja sam terorista.
Use The Force my young Luke Filewalker.
 
Odgovor na temu

golden eye

Član broj: 118762
Poruke: 331
93.87.219.*



+7 Profil

icon Re: {Mandriva 2008} Via Rhine 2 problem12.06.2009. u 19:28 - pre 180 meseci
Pod windows radi ok
za ostale linuxe ne znam
 
Odgovor na temu

combuster
Ivan Bulatovic
Kraljevo

Član broj: 151351
Poruke: 4563
93.86.6.*

Sajt: www.linuxsrbija.org


+104 Profil

icon Re: {Mandriva 2008} Via Rhine 2 problem12.06.2009. u 20:38 - pre 180 meseci
Kad prestane da radi otkucaj u terminalu dmesg i vidi da li kuka nesto za eth0 ili via rhine... Takodje otkucaj ifconfig... Sve ovo mozes i nama ovde da postujes pa da vidimo sta ne valja...
make love - !war
 
Odgovor na temu

golden eye

Član broj: 118762
Poruke: 331
93.87.219.*



+7 Profil

icon Re: {Mandriva 2008} Via Rhine 2 problem12.06.2009. u 22:45 - pre 180 meseci
dmesg kaze


[@localhost Dir. Igre]$ dmesg
Linux version 2.6.24.4-desktop586-1mnb ([email protected]) (gcc version 4.2.3 (4.2.3-6mnb1)) #1 SMP Thu Mar 27 14:20:33 CET 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffec000 (usable)
BIOS-e820: 000000003ffec000 - 000000003ffef000 (ACPI data)
BIOS-e820: 000000003ffef000 - 000000003ffff000 (reserved)
BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
Entering add_active_range(0, 0, 229376) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 229376
On node 0 totalpages: 229376
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F6DB0, 0014 (r0 ASUS )
ACPI: RSDT 3FFEC000, 002C (r1 ASUS A7V266-C 30303031 MSFT 31313031)
ACPI: FACP 3FFEC080, 0074 (r1 ASUS A7V266-C 30303031 MSFT 31313031)
ACPI: DSDT 3FFEC100, 2460 (r1 ASUS A7V266-C 1000 MSFT 100000B)
ACPI: FACS 3FFFF000, 0040
ACPI: BOOT 3FFEC040, 0028 (r1 ASUS A7V266-C 30303031 MSFT 31313031)
ACPI: PM-Timer IO Port: 0xe408
Allocating PCI resources starting at 50000000 (gap: 40000000:bfff0000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227584
Kernel command line: BOOT_IMAGE=linux root=UUID=195f83f1-0bab-4fed-a17d-555c3219108d resume=/dev/hda5
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (0170e000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1343.104 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 902348k/917504k available (2308k kernel code, 14032k reserved, 788k data, 288k init, 0k highmem, 0k BadRAM)
virtual kernel memory layout:
fixmap : 0xfffb3000 - 0xfffff000 ( 304 kB)
vmalloc : 0xf8800000 - 0xfffb1000 ( 119 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc040e000 - 0xc0456000 ( 288 kB)
.data : 0xc0341103 - 0xc0406284 ( 788 kB)
.text : 0xc0100000 - 0xc0341103 (2308 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 2687.78 BogoMIPS (lpj=1343890)
Security Framework initialized
AppArmor: AppArmor disabled by boottime parameter

Capability LSM initialized
Mount-cache hash table entries: 512
Hook version: 2.6.24 2008/01/25
CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 13k freed
Early unpacking initramfs... done
Freeing initrd memory: 2163k freed
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ACPI: setting ELCR to 0200 (from 0c60)
CPU0: AMD Athlon(TM)Processor stepping 01
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
net_namespace: 64 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0ef0, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:02: ioport range 0x3f0-0x3f1 has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0xe400-0xe47f has been reserved
system 00:03: ioport range 0xe800-0xe80f has been reserved
system 00:03: ioport range 0x290-0x291 has been reserved
system 00:03: ioport range 0x370-0x373 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: dd000000-dfdfffff
PREFETCH window: dff00000-fbffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x3a set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1244838940.317:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
Boot video device is 0000:01:00.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
registered taskstats version 1
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Freeing unused kernel memory: 288k freed
Switched to high resolution mode on CPU 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: VIA VLink IRQ fixup for 0000:00:11.2, from 6 to 11
uhci_hcd 0000:00:11.2: UHCI Host Controller
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:11.2: irq 11, io base 0x0000b800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: VIA VLink IRQ fixup for 0000:00:11.3, from 6 to 11
uhci_hcd 0000:00:11.3: UHCI Host Controller
uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:11.3: irq 11, io base 0x0000b400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: VIA VLink IRQ fixup for 0000:00:11.1, from 0 to 11
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
hdb: PIONEER DVD-RW DVR-109, ATAPI CD/DVD-ROM drive
hda: WDC WD800JB-00JJC0, ATA DISK drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/66 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 >
Probing IDE interface ide1...
Probing IDE interface ide1...
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Not activating Mandatory Access Control now since /sbin/ccs-init doesn't exist.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Linux agpgart interface v0.102
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
agpgart: Detected VIA KT266/KY266x/KT333 chipset
agpgart: AGP aperture is 32M @ 0xfc000000
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
eth0: VIA Rhine II at 0x1d400, 00:05:5d:de:49:a3, IRQ 10.
eth0: MII PHY found at address 8, status 0x782d advertising 01e1 Link 45e1.
hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
Uniform CD-ROM driver Revision: 3.20
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
input: PC Speaker as /class/input/input4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
floppy0: no floppy controllers found
vboxadd: VirtualBox PCI device not found.
vboxadd: VirtualBox PCI device not found.
vboxvfs: Unknown symbol vboxadd_cmc_open
vboxvfs: Unknown symbol vboxadd_cmc_ctl_guest_filter_mask
vboxvfs: Unknown symbol vboxadd_cmc_call
vboxvfs: Unknown symbol vboxadd_cmc_close
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [email protected]
loop: module loaded
EXT3 FS on hda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 4088500k swap on /dev/hda5. Priority:-1 extents:1 across:4088500k
nf_conntrack version 0.5.0 (14336 buckets, 57344 max)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
NET: Registered protocol family 17
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
martian source 255.255.255.255 from 192.168.1.1, on dev eth0
ll header: ff:ff:ff:ff:ff:ff:00:18:02:f4:91:9f:08:00
fuse init (API version 7.9)
ip_tables: (C) 2000-2006 Netfilter Core Team
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (14336 buckets, 57344 max)
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
ip6_tables: (C) 2000-2006 Netfilter Core Team
ctnetlink v0.93: registering with nfnetlink.
eth0: no IPv6 routers present
ClusterIP Version 0.8 loaded successfully
netfilter PSD loaded - (c) astaro AG
IFWLOG: register target
SCSI subsystem initialized
Driver 'sr' needs updating - please use bus_type methods
st: Version 20070203, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
[@localhost Dir. Igre]$


Da li je odje sve ok?
 
Odgovor na temu

combuster
Ivan Bulatovic
Kraljevo

Član broj: 151351
Poruke: 4563
93.86.111.*

Sajt: www.linuxsrbija.org


+104 Profil

icon Re: {Mandriva 2008} Via Rhine 2 problem13.06.2009. u 08:35 - pre 180 meseci
Citat:

eth0: VIA Rhine II at 0x1d400, 00:05:5d:de:49:a3, IRQ 10.
eth0: MII PHY found at address 8, status 0x782d advertising 01e1 Link 45e1.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
martian source 255.255.255.255 from 192.168.1.1, on dev eth0


U dmesg-u je sve ok... Jesi li kucao dmesg posto ti je net prestao ili odmah kada si podigao sistem? I da treba da postujes i output od komande ifconfig ali tek posto ti se zezne net...
make love - !war
 
Odgovor na temu

golden eye

Član broj: 118762
Poruke: 331
93.86.141.*



+7 Profil

icon Re: {Mandriva 2008} Via Rhine 2 problem13.06.2009. u 10:42 - pre 180 meseci
Citat:
combuster: U dmesg-u je sve ok... Jesi li kucao dmesg posto ti je net prestao ili odmah kada si podigao sistem? I da treba da postujes i output od komande ifconfig ali tek posto ti se zezne net...


da ukucao sam nakon prestanka rada
Sinoc sam uradio reinstall sistema i sada radi normalno ali kada stane postovacu
 
Odgovor na temu

[es] :: Linux hardware :: {Mandriva 2008} Via Rhine 2 problem

[ Pregleda: 2213 | Odgovora: 6 ] > FB > Twit

Postavi temu Odgovori

Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.