[es] - firewall rb obara prenos data

dendic
servisi ,odrzavanje
Mostar

Član broj: 10678
Poruke: 1856

+10 Profil

^{26.09.2014. u 18:45 - pre 116 meseci}

Pokusavam izmedju dva servera progurat ftp data prenos kroz firewall mikrotik rb450G. Nakon uspostave konekcije kroz port 21 prenos mi pada kroz ftp port 20. Ima li ko iskustva sa mikrotikom kao firewallom,da li bi neki drugi model rb-a bolje se ponasao?

_{[Ovu poruku je menjao dendic dana 26.09.2014. u 23:23 GMT+1]}

Odgovor na temu

Aleksandar Đokić

Član broj: 13478
Poruke: 4793
*.adsl-a-2.sezampro.rs.

+638 Profil

Re: firewall rb obara prenos data

^{28.09.2014. u 20:28 - pre 116 meseci}

Ne, 20 je dst (na ftp serveru). Na klijentu je src.port+1 na koji se server "kaci" sa porta 20.

Najbolje ovako:

Citat:

Active FTP

In active mode FTP the client connects from a random unprivileged port (N > 1023) to the FTP server's command port, port 21. Then, the client starts listening to port N+1 and sends the FTP command PORT N+1 to the FTP server. The server will then connect back to the client's specified data port from its local data port, which is port 20.
From the server-side firewall's standpoint, to support active mode FTP the following communication channels need to be opened:
FTP server's port 21 from anywhere (Client initiates connection)
FTP server's port 21 to ports > 1023 (Server responds to client's control port)
FTP server's port 20 to ports > 1023 (Server initiates data connection to client's data port)
FTP server's port 20 from ports > 1023 (Client sends ACKs to server's data port)

Passive FTP

In order to resolve the issue of the server initiating the connection to the client a different method for FTP connections was developed. This was known as passive mode, or PASV, after the command used by the client to tell the server it is in passive mode.
In passive mode FTP the client initiates both connections to the server, solving the problem of firewalls filtering the incoming data port connection to the client from the server. When opening an FTP connection, the client opens two random unprivileged ports locally (N > 1023 and N+1). The first port contacts the server on port 21, but instead of then issuing a PORT command and allowing the server to connect back to its data port, the client will issue the PASV command. The result of this is that the server then opens a random unprivileged port (P > 1023) and sends P back to the client in response to the PASV command. The client then initiates the connection from port N+1 to port P on the server to transfer data.
From the server-side firewall's standpoint, to support passive mode FTP the following communication channels need to be opened:
FTP server's port 21 from anywhere (Client initiates connection)
FTP server's port 21 to ports > 1023 (Server responds to client's control port)
FTP server's ports > 1023 from anywhere (Client initiates data connection to random port specified by server)
FTP server's ports > 1023 to remote ports > 1023 (Server sends ACKs (and data) to client's data port)

http://slacksite.com/other/ftp.html

Odgovor na temu