kupio sam polovni geneko i neznam sifru za pristu u ap

Reset device
This unit can be reset to factory defaults by reset hole and the procedure can be done with the following steps.
Step1: You can reset the Access Point’s settings to factory defaults by pushing a paperclip in the little hole next to the UTP port while the Access Point is on and do not release it right away.
Step2: Release the reset button when the “ACT” LED from burning to blinking. Normally, it may take 5~10 seconds. After release the reset button, the unit has been reverted to default setting.

START UP & LOGIN
In order to configure the WX-1590, you must use your web browser and manually input http://192.168.5.100 into the Address box and press Enter. The Main Page will appear.
In order to configure the WX-1590, you must input the user name and password into the User Name box and the Password box. The default user name and password is “admin”.