problem sa event id 5719 netlogonCode:
Event Type: Error
Event Source: W32Time
Event Category: None
Event ID: 29
Date: 3.12.2009
Time: 6:51:41
User: N/A
Computer: workstation
Description:
The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible. No attempt to contact a source will be made for 15 minutes. NtpClient has no source of accurate time.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event Type: Warning
Event Source: W32Time
Event Category: None
Event ID: 14
Date: 3.12.2009
Time: 6:51:41
User: N/A
Computer: workstation
Description:
The time provider NtpClient was unable to find a domain controller to use as a time source. NtpClient will try again in 15 minutes.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event Type: Error
Event Source: NETLOGON
Event Category: None
Event ID: 5719
Date: 3.12.2009
Time: 6:51:37
User: N/A
Computer: workstation
Description:
No Domain Controller is available for domain SOPETROVAC due to the following:
There are currently no logon servers available to service the logon request. .
Make sure that the computer is connected to the network and try again. If the problem persists, please contact your domain administrator.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 5e 00 00 c0
Event Type: Error
Event Source: W32Time
Event Category: None
Event ID: 29
Date: 3.12.2009
Time: 6:51:41
User: N/A
Computer: workstation
Description:
The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible. No attempt to contact a source will be made for 15 minutes. NtpClient has no source of accurate time.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event Type: Warning
Event Source: W32Time
Event Category: None
Event ID: 14
Date: 3.12.2009
Time: 6:51:41
User: N/A
Computer: workstation
Description:
The time provider NtpClient was unable to find a domain controller to use as a time source. NtpClient will try again in 15 minutes.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Event Type: Error
Event Source: NETLOGON
Event Category: None
Event ID: 5719
Date: 3.12.2009
Time: 6:51:37
User: N/A
Computer: workstation
Description:
No Domain Controller is available for domain SOPETROVAC due to the following:
There are currently no logon servers available to service the logon request. .
Make sure that the computer is connected to the network and try again. If the problem persists, please contact your domain administrator.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 5e 00 00 c0
Na nekim radnim stanicama koje su imale ovakav problem preinstalirao sam drajvere i ove se poruke nisu vise pojavljivale.
Medjutim, na ovih 5-6 sa mpokusavao skoro sve sto se tice radnih stanica sa sajta
http://www.eventid.net/display...mp;source=NETLOGON&phase=1
takodje sam pokusavao i
Code:
One possible cause of this error is that you have run out of buffer space in the NetBT datagram buffer. To resolve this problem, increase the MaxDgramBuffering value from 128 KB to 256 KB. Run Regedt32.exe, go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters.On the Edit menu, click Add Value, and then add the following information:
Value Name: MaxDgramBuffering
Data Type: REG_DWORD
Value: 0x40000
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters
Value Name: ExpectedDialupDelay
Data Type: Reg_Dword
Data Value is in seconds (default = 0)
Data Range is between 0 and 600 seconds (10 minutes)
One possible cause of this error is that you have run out of buffer space in the NetBT datagram buffer. To resolve this problem, increase the MaxDgramBuffering value from 128 KB to 256 KB. Run Regedt32.exe, go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters.On the Edit menu, click Add Value, and then add the following information:
Value Name: MaxDgramBuffering
Data Type: REG_DWORD
Value: 0x40000
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters
Value Name: ExpectedDialupDelay
Data Type: Reg_Dword
Data Value is in seconds (default = 0)
Data Range is between 0 and 600 seconds (10 minutes)
ali nista. moze li mi neko dati jos neko uputstvo kako da resim ovaj problem?
Hvala
