Citat:
prle gilipter: potrebna mi je pomoc jer nece da mi podigne sistem nego izbacuje beo ekran kada ga upaim!da li neko zna u cemu je problem i resenje istog ili je tel zavrsio karijeru?
Za početak možeš li "uđeš" u bootloader?
"
Bootloader
----------
To enter into the Bootloader, simply press and hold down the camera button while doing a soft-reset. You are in the Bootloader when you see a screen with 3 color's in it, and if you have the device connected to your PC then you will also see "USB" at the bottom. At the top of the screen, the SPL and IPL versions are displayed.
If you run an ROM update in this mode, the text in the bottom left corner will change to RUU.
Soft Reset
----------
Sometimes your device may lock up, and require a soft-rest. For this, simply use your stylus to poke into the hole which is about 2mm to the left of the Mini-USB port.
Hard Reset
----------
There are many different reason's as to why you need to do a Hard-Reset, but to perform it, press and hold down the Camera and Comm-Manager button's, then do a soft-reset. The next screen will appear, and you will have to press the Green call button, which will then tell you that it's reformatting the file system, then it will continue to setup your device. "
Registrovani: 9 ( ironman, Tonisrb, Texas Instruments, bojanum, Ultrena, misamilanovic, bordzija, djoka_l, Nebojsa Milanovic )
problem sa qtek-om s200
Re: problem sa qtek-om s200