Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.

Cisco 836 pomoc oko adsl-a

[es] :: ISP :: ADSL :: Cisco 836 pomoc oko adsl-a

[ Pregleda: 2658 | Odgovora: 9 ] > FB > Twit

Postavi temu Odgovori

Autor

Pretraga teme: Traži
Markiranje Štampanje RSS

bjnetic
Brace Jerkovic

Član broj: 61767
Poruke: 51
*.adsl-1.sezampro.yu.



Profil

icon Cisco 836 pomoc oko adsl-a04.08.2009. u 20:23 - pre 179 meseci
Potrebna mi je pomoc oko konfigurisanja cisco rutera, slabo se slazem sa ciscom pa mi je potrebna pomoc :)
naime ovaj ruter treba da izigrava klasican adsl ruter, dakle jedna staticka adresa na ether1 da se iskunfgurise adsl modem i to je to... video sam da na forumu vec postoji pitanje ali meni treba pomoc od samog pocetka dakle kako da obrisem konfiguraciju prethodnog vlasnika i da se postavi novi config....
Znam da je cisco kompleksan i da se njegova konfiguracija uci mesecima, ja sam vise usmeren na mikrotika i sad mi je problem da iscitavam uputstva a pri tom nemam koga da pitam da mi to odradi umesto mene...
treba mi neko ko je raspolozen da posveti malo vremena mojoj problematici.
PLACAM PIVO!
 
Odgovor na temu

optix
CH

SuperModerator
Član broj: 7009
Poruke: 1867
212.200.240.*



+101 Profil

icon Re: Cisco 836 pomoc oko adsl-a04.08.2009. u 23:00 - pre 179 meseci
Na forumu je vise puta postavljana kompletna konfiguracija toga sto te zanima. Pogledaj top temu i procitaj sve iz nje, kao i linkove koje se tu nalaze.

Ako imas 0 iskustva sa cisco-om, a nisi spreman da ucis, bojim se da je nerealno ocekivati da ces podesiti ruter sve i da neko objasni sve osnove. U tom slucaju najbolje je da nekog angazujes da to odradi umesto tebe.

Ako hoces da ucis, procitas sve teme na es-u koje se time bave, pronadjes objasnjenja za osnovnu konfiguraciju rutera, pa ako negde zapne, javis se ovde sa konkretnim problemom.
"99% of your thought process is protecting your self-conceptions,
and 98% of that is wrong."
 
Odgovor na temu

bjnetic
Brace Jerkovic

Član broj: 61767
Poruke: 51
*.adsl-1.sezampro.yu.



Profil

icon Re: Cisco 836 pomoc oko adsl-a04.08.2009. u 23:54 - pre 179 meseci
ok, mozda sam se ja lose postavio... znam sta sam pitao i glupo je bilo da sam ocekivao drugaciji odgovor, naravno da sam spreman da naucim, nisam od onih koji misle da znaju sve, zato i trazim pomoc, pred znanje mislim da imam, a ovo sto je meni potrebno na ovom ruteru je nesto osnovno, pa me je to i navelo da se postavim tako... izvinjenje...
ajde da ti postavim konkretno pitanje...
imam problema sa passwordom, kako da dodjem do komandne konzole... kad dodjem tu, onda cu poceti da citam o koracim koji me cekaju i na ono sto me ti navodis, dakle password recovery, evo koda a ti mi reci sta radim pogresno?

Code:
System Bootstrap, Version 12.2(11r)YV3, RELEASE SOFTWARE (fc2) 
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2004 by cisco Systems, Inc.
C800/SOHO series (Board ID: 30-132) platform with 65536 Kbytes of main memory

rommon 1 > confreg


You must reset or power cycle for new config to take effect
rommon 2 > reset
System Bootstrap, Version 12.2(11r)YV3, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2004 by cisco Systems, Inc.
C800/SOHO series (Board ID: 30-132) platform with 65536 Kbytes of main memory

program load complete, entry point: 0x80013000, size: 0x6d22bc 
Self decompressing the image : #################################################
#### [OK]

              Restricted Rights Legend  

Use, duplication, or disclosure by the Government is 
subject to restrictions as set forth in subparagraph 
(c) of the Commercial Computer Software - Restricted 
Rights clause at FAR sec. 52.227-19 and subparagraph 
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco IOS Software, C836 Software (C836-K9O3Y
TWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by Cisco Systems, Inc.
Compiled Sat 21-Feb-04 13:38 by eaarmas
Image text-base: 0x800131E8, data-base: 0x80D17C34


This product contains cryptographic features and is subject to United 
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and user
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].                 

Cisco C836 (MPC857T) processor (revision 0x300) with 58983K/6553K bytes of memory.  
Processor board ID FCZ094421NC (1104522248), with hardware revision 041F 
CPU rev number 7
1 Ethernet interface
1 ISDN Basic Rate interface 
1 ATM interface
128K bytes of NVRAM.
12288K bytes of processor board System flash (Read/Write)
2048K bytes of processor board Web flash (Read/Write)


         --- System Configuration Dialog --- 

Would you like to enter the initial configuration dialog? [yes/no]: no


Press RETURN to get started!                            


*Mar  1 00:00:06.035: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
*Mar  1 00:00:07.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
 changed state to up                    
*Mar  1 00:00:17.731: %SYS-6-LOGGERSTART: Logger process started
*Mar  1 00:00:19.447: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
 changed state to up                    
*Mar  1 00:00:19.871: %LINK-3-UPDOWN: Interface ATM0, changed state to down
*Mar  1 00:00:21.067: %LINK-5-CHANGED: Interface BRI0, changed state to administ
ratively down             
*Mar  1 00:00:21.067: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0,
ged state to down                 
*Mar  1 00:00:22.111: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C836 Software (C836-K9O3Y6-M), Version 12.3(7)T, RELEASE SOF
TWARE (fc1)           
Technical Support: http://www.cisco.com/techsupport 
Copyright (c) 1986-2004 by Cisco Systems, Inc.
Compiled Sat 21-Feb-04 13:38 by eaarmas                                       
*Mar  1 00:00:22.111: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing
 a cold start             
*Mar  1 00:00:22.143: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0, chan
ged state to down                 
*Mar  1 00:00:25.651: %LINK-5-CHANGED: Interface ATM0, changed state to administ
ratively down             
*Mar  1 00:00:25.655: %LINK-5-CHANGED: Interface Ethernet0, changed state to adm
inistratively down                  
*Mar  1 00:00:26.671: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
 changed state to down                      
Router>enable             
Router#copy startup-config running-config                                         
Destination filename [running-config]?                                      

%NAT: Error activating CNBAR on the interface Ethernet0
%NAT: Error activating CNBAR on the interface Dialer1
00:01:01: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
1862 bytes copied in 2.548 secs (731 bytes/sec)
913151777#          
00:01:02: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
00:01:03: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, chang
ed state to up              
913151777#configure terminal                            
Enter configuration commands, one per line.  End with CNTL/Z.
913151777(config)#enable secret bjnetic
913151777(config)#^Z
913151777#          
00:01:45: %SYS-5-CONFIG_I: Configured from console by console 
913151777#show ip interface brief                                 
Interface                  IP-Address      OK? Method Status                Prot
ocol    
ATM0                       unassigned      YES TFTP   administratively down down

ATM0.864                   unassigned      YES unset  administratively down down

BRI0                       unassigned      YES TFTP   administratively down down

BRI0:1                     unassigned      YES unset  administratively down down

BRI0:2                     unassigned      YES unset  administratively

Dialer1                    unassigned      YES TFTP   up                    up

Ethernet0                  192.168.0.254   YES TFTP   administratively down down

Loopback1                  88.116.99.242   YES TFTP   up                    up

Virtual-Access1            unassigned      YES unset  up                    up

913151777#configure terminal                            
Enter configuration commands, one per line.  End with CNTL/Z.
913151777(config)#interface Ethernet0
913151777(config-if)#no shutdown
913151777(config-if)#                     
00:02:34: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
00:02:35: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed sta
te to up^Z          
913151777#          
00:02:42: %SYS-5-CONFIG_I: Configured from console by console 
913151777#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...                         
[OK]    
913151777#show version                      
Cisco IOS Software, C836 Software (C836-K9O3Y6-M), Version 12.3(7)T, RELEASE SOF
TWARE (fc1)           
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by Cisco Systems, Inc.
Compiled Sat 21-Feb-04 13:38 by eaarmas                                       

ROM: System Bootstrap, Version 12.2(11r)YV3, RELEASE SOFTWARE (fc2)

913151777 uptime is 4 minutes                             
System returned to ROM by power-on                                  
System image file is "flash:c836-k9o3y6-mz.123-7.T.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html                              

If you require further assistance please contact us by sending email to
[email protected].                 

Cisco C836 (MPC857T) processor (revision 0x300) with 58983K/6553K bytes of memor
y.  
Processor board ID FCZ094421NC (1104522248), with hardware revision 041F
CPU rev number 7                
1 Ethernet interface                    
1 ISDN Basic Rate interface                           
1 ATM interface               
128K bytes of NVRAM.                    
12288K bytes of processor board System flash (Read/Write)
2048K bytes of processor board Web flash (Read/Write)

Configuration register is 0x2142

913151777#configure terminal                            
Enter configuration commands, one per line.  End with CNTL/Z.
913151777(config)#conf                    
913151777(config)#^Z                    
913151777#          
00:05:08: %SYS-5-CONFIG_I: Configured from console by console
913151777#show version                      
Cisco IOS Software, C836 Software (C836-K9O3Y6-M), Version 12.3(7)T, RELEASE SOF
TWARE (fc1)           
Technical Support: http://www.cisco.com/techsupport                      
Copyright (c) 1986-2004 by Cisco Systems, Inc.                                              
Compiled Sat 21-Feb-04 13:38 by eaarmas                                       

ROM: System Bootstrap, Version 12.2(11r)YV3, RELEASE SOFTWARE (fc2)

913151777 uptime is 5 minutes                             
System returned to ROM by power-on                                  
System image file is "flash:c836-k9                                  


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].

Cisco C836 (MPC857T) processor (revision 0x300) with 58983K/6553K bytes of memor
y.
Processor board ID FCZ094421NC (1104522248), with hardware revision 041F
CPU rev number 7
1 Ethernet interface
1 ISDN Basic Rate interface
1 ATM interface
128K bytes of NVRAM.
12288K bytes of processor board System flash (Read/Write)
2048K bytes of processor board Web flash (Read/Write)

Configuration register is 0x2142 (will be 0x2102 at next reload)

913151777#[




[Ovu poruku je menjao optix dana 05.08.2009. u 01:27 GMT+1]
 
Odgovor na temu

optix
CH

SuperModerator
Član broj: 7009
Poruke: 1867
212.200.240.*



+101 Profil

icon Re: Cisco 836 pomoc oko adsl-a05.08.2009. u 00:33 - pre 179 meseci
Obzirom da si uspeo da udjes u enable mod, taj problem si izgleda resio, barem se tako vidi iz koda koji si poslao.

Citat:

Router>enable
Router#



p.s. molim te obrati paznju na formatiranje u code tagovima :)

"99% of your thought process is protecting your self-conceptions,
and 98% of that is wrong."
 
Odgovor na temu

bjnetic
Brace Jerkovic

Član broj: 61767
Poruke: 51
*.adsl-a-1.sezampro.yu.



Profil

icon Re: Cisco 836 pomoc oko adsl-a05.08.2009. u 08:53 - pre 179 meseci
hm, mislim da nije resen problem...
svaki put kad ukljucim ruter i on iscita ios, na kraju mi ponudi da unesem password, koji ja ne znam... i to tri puta
Code:

User Access Verification

Password:
Password:
Password:
% Bad passwords


ruter con0 is now available


Press RETURN to get started.


znaci u enable mod mogu da udjem samo kad stisnem ctrl+break, ovaj pass koji sam ja uneo, tj. bjnetic, ne funkcionise kad mi ponudi pass...
 
Odgovor na temu

optix
CH

SuperModerator
Član broj: 7009
Poruke: 1867
212.200.240.*



+101 Profil

icon Re: Cisco 836 pomoc oko adsl-a05.08.2009. u 09:15 - pre 179 meseci
Citat:
913151777(config)#enable secret bjnetic

Ovim si podesio sifru za ulazak u najvisi - administratorski (enable) mod.

Za pristup preko konzole (serijskog kabla) postavljanje sifre je:

Code:

line con 0
 password ***


btw. probaj da lupis samo enter, mozda je ostavljeno prazno.

Za pristup preko telneta/ssh-a (ako su omoguceni u konfiguraciji):
Code:

line vty 0
 password ***



"99% of your thought process is protecting your self-conceptions,
and 98% of that is wrong."
 
Odgovor na temu

bjnetic
Brace Jerkovic

Član broj: 61767
Poruke: 51
*.adsl-a-1.sezampro.yu.



Profil

icon Re: Cisco 836 pomoc oko adsl-a05.08.2009. u 09:42 - pre 179 meseci
hvala na brzom odgovoru, to je obavljeno... ajmo dalje...
sad kada sam u enable modu odradio sam sledece i sve je vraceno na factory default...
prateci tvoj link poceo sam da unosim komande za konfiguraciju, ali evo opet zaglava, u cemu je kvaka?

Code:
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#vpdn enable
Router(config)#vpdn-group pppoe
Router(config-vpdn)#request-dialin
Router(config-vpdn-req-in)#protocol pppoe
Router(config-vpdn-req-in)#interface Dialer1
Router(config-if)#
*Mar  1 00:03:27.331: DSL: Connection has reached max retries, toggle to other m
ode
Router(config-if)#mtu 1492
Router(config-if)#ip address negotiated
Router(config-if)#ip nat outside
%NAT: Error activating CNBAR on the interface Dialer1
 
Odgovor na temu

bjnetic
Brace Jerkovic

Član broj: 61767
Poruke: 51
*.adsl-1.sezampro.yu.



Profil

icon Re: Cisco 836 pomoc oko adsl-a05.08.2009. u 19:05 - pre 179 meseci
trud se isplatio...

Code:
ping www.google.com
Sending 5, 100-byte ICMP Echos to 74.125.39.147, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 36/38/40 ms


sad mi samo jos treba pomoc oko rutiranja izmedju modema i eth0
na eth0 je staticka adresa, dakle ne koristim dhcp server...
 
Odgovor na temu

bjnetic
Brace Jerkovic

Član broj: 61767
Poruke: 51
*.adsl-a-1.sezampro.yu.



Profil

icon Re: Cisco 836 pomoc oko adsl-a05.08.2009. u 19:22 - pre 179 meseci
namestio...
falilo mi
access-list 1 permit 192.168.250.0.0 0.0.0.255

misija zavrsena...
hvala optix na pomoci ;)
 
Odgovor na temu

optix
CH

SuperModerator
Član broj: 7009
Poruke: 1867
212.200.240.*



+101 Profil

icon Re: Cisco 836 pomoc oko adsl-a05.08.2009. u 20:52 - pre 179 meseci
kul, pozdrav
"99% of your thought process is protecting your self-conceptions,
and 98% of that is wrong."
 
Odgovor na temu

[es] :: ISP :: ADSL :: Cisco 836 pomoc oko adsl-a

[ Pregleda: 2658 | Odgovora: 9 ] > FB > Twit

Postavi temu Odgovori

Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.