Arch linux thread

Jel mozes da napravis ovako:

/dev/sda1 - root fs
/dev/sda2 - koliko ti treba za podatke recimo /data
/dev/sda3 - swap

Instaliraj arch tako i reci da li prolazi, da znamo da li je do hw ili ne...

---

Sada nije

loading no read

nego

loading.....please wait

error18


# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst

# DEVICE NAME CONVERSIONS
#
# Linux Grub
# -------------------------
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
#

# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution

# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue

# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
#
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
#
#-*

# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/b1a877f5-0c71-46ab-8dee-f14881eebb12 ro
initrd /boot/kernel26.img

# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/b1a877f5-0c71-46ab-8dee-f14881eebb12 ro
initrd /boot/kernel26-fallback.img

# (2) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive

---

To ti definitivno nesto nije u redu sa particijama ili hardware-om, los medij za instalaciju otpisujem jer proverava md5 svakog koliko je meni poznato... Ajde probaj da instaliras ubuntu ili bilo koji drugi...

---

Jedino da odradis instalaciju do momenta kada se instalira boot-loader (to preskocis),
a onda izadjes iz menija za instalaciju, i instaliras grub2, mozda se on bolje snadje...

(ako je uopste do toga)

# pacman -S grub2

(pre toga treba da imas podesen mirrorlist i pacman.conf, to odradi iz menija, i podignut mrezni interfejs)

Ni meni ne pada na pamet vise sta bi moglo biti. Izvini, mislio sam da ti je root /dev/sda2
kad sam ono pisao.

---

Inace radim FTP instalaciju ne Core, tako sam od starta kenuo kada sam se pokusao bakcati sa Arch-om.Nebitno al ajd
Juce sam pokusao instalirati Ubuntu 8.04 tu isao sam na install Ubuntu i kada je islo Loading Kernel tu je dosao do kraja ali je zapuco.I ni makac.

Jedino jos da probam ovako ko sto je Srdjan rekao.

Izvinite Vi sto nisam spomenuo situaciju sa Ubuntom, jednostavno sam to odradio onako usput i ni na kraj pameti.

Prvo bi iskljucio ovaj sda i umesto njega cu prikljuciti nov HDD, sta mislite moze biti do njega.Ja mislim ako je do hardwera a verujem da jeste prvi na mojoj listi visi hard.

Blagovremeno sam menjao komponente sve ostalo je relativno novo, ma novo nesto 7 dana nesto 15 nesto mesec dana.

Hardovi su 3-6 meseci stari.

---

Iskljucioo sam SDA disk sa SDB sam skinuo XP tako da je on bio SDA i na njega istalirao Arch.

Naravno USPEO SAM!Konacno.

Sada cu da se igram...hvala Vam zaista na trudu i vremenu, zaista ovde covek uvek dobije pomoc.

Svako dobro i SRECNI PRAZNICI!

---

Znaci to ga je nesto bunilo... jbg.

Srecni praznici i tebi, i svima ostalima, i da nam Arch bude brzi, stabilniji i sigurniji u 2010 :D

---

Pa da.Posle sam uzeo i da instaliram windows da vidim al nisam ni tu imao sanse da ga instaliram, sve dok nisam iskljucio taj famozni HDD iz napajanja i SATA kabel i bez problema odradio instalaciju, ma sve sam probao.Ustvari ostalo mi sada da iskljucim ovaj od 500GB gde je windows i da na ovaj koji je verovatno otisao u lovista pokusam ponovo.Ako me razumete.
Da li je moguce da napajanje slabije?

Asus P5Q DELUXE

nVIDIA 9600gt

Geil 2x2GB 1066 BlackDragon

2X500GB Samsung

1X1TB Samsung

CPU Intel Q9400 QuadCore

WinXP2000Global tako nesto TV karta

CD uredjaj naravno, 1kom.

4 ventilatora bez onog na napajanju

I sve to na Codegen 600w

Znam da nije tema hardware ali nema sumnje da necu dobiti tacan i siguran odgovor.

Da li je dovoljno ili ne?Ako mozda....to je NE svakako

---

Na tih "Codegen" 600 wati mozes da zaboravis.

Pitaj oko toga u harware delu foruma, kolega Binary Mind ce ti bolje reci,
ali ti je moj predlog da ako neces da ti izgori taj skup procesor i mozda i
sve ostalo sa njim, stavis neko "krsteno" napajanje.

Ja sam se jednom tako zezao sa kacenjem svega i svacega na nekog kineza,
i preziveo je samo jedan RAM modul kada je suknuo plamen pri paljenju kompa.

Izgoreo mi je (osim ploce, procesora, itd - i jedan SCSI PCI kontroler i 2 SCSI diska)

---

Srecni praznici ljubiteljima open source_a,slobode.

Danas kad sam restartovao komp nece da podigne x server.
Mada sam kao root usao normalno usao u x server koji je standard tirkiz sa dva terminala.
Odatle vam i pisem.

XINIT: no such process (errno 3): server error

Jel ti testing enable-ovan ? Bilo je par update-ova vezana za mesa i xserver ali u testing repou.

Koji DE koristis i postuj ovde /var/log/Xorg.0.log

---

Treba mi Xorg.0.log posle neuspesnog pokusaja da se ulogujes kao user. A DE mislim na Desktop enviroment - Desktop okruzenje (GNOME, KDE)...

---

Izvini nepromisljeno!!


X.Org X Server 1.7.3
Release Date: 2009-12-3
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux myhost 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/b5e960ab-aca7-4bea-b543-7b550bc31276 ro
Build Date: 07 December 2009 03:24:19PM

Current version of pixman: 0.16.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 27 05:50:07 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x81e4e40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7

(--) PCI:*(0:1:0:0) 10de:0402:1043:8253 nVidia Corporation G84 [GeForce 8600 GT] rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf4000000/33554432, I/O @ 0x0000b000/128, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 190.42 Tue Oct 20 20:55:08 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 190.42 Tue Oct 20 20:26:00 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1024x768_85 +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) Dec 27 05:50:07 NVIDIA(0): Enabling RENDER acceleration
(II) Dec 27 05:50:07 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Dec 27 05:50:07 NVIDIA(0): enabled.
(II) Dec 27 05:50:08 NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:1:0:0 (GPU-0)
(--) Dec 27 05:50:08 NVIDIA(0): Memory: 262144 kBytes
(--) Dec 27 05:50:08 NVIDIA(0): VideoBIOS: 60.84.68.00.00
(II) Dec 27 05:50:08 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Dec 27 05:50:08 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Dec 27 05:50:08 NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:1:0:0:
(--) Dec 27 05:50:08 NVIDIA(0): HKC 775V (CRT-0)
(--) Dec 27 05:50:08 NVIDIA(0): HKC 775V (CRT-0): 400.0 MHz maximum pixel clock
(II) Dec 27 05:50:08 NVIDIA(0): Assigned Display Device: CRT-0
(II) Dec 27 05:50:08 NVIDIA(0): Validated modes:
(II) Dec 27 05:50:08 NVIDIA(0): "1024x768_85+0+0"
(II) Dec 27 05:50:08 NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) Dec 27 05:50:08 NVIDIA(0): DPI set to (81, 81); computed from "UseEdidDpi" X config
(--) Dec 27 05:50:08 NVIDIA(0): option
(==) Dec 27 05:50:08 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Dec 27 05:50:08 NVIDIA(0): Initialized GPU GART.
(II) Dec 27 05:50:08 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) Dec 27 05:50:08 NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) Dec 27 05:50:08 NVIDIA(0): configuration option may not be set correctly. When the
(II) Dec 27 05:50:08 NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) Dec 27 05:50:08 NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) Dec 27 05:50:08 NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) Dec 27 05:50:08 NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) Dec 27 05:50:08 NVIDIA(0): Config Options in the README.
(II) Dec 27 05:50:08 NVIDIA(0): Setting mode "1024x768_85+0+0"
(II) Loading extension NV-GLX
(II) Dec 27 05:50:08 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Dec 27 05:50:08 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(EE) Error compiling keymap (server-0)
(EE) XKB: Couldn't compile keymap
XKB: Failed to compile keymap
Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config.

Fatal server error:
Failed to activate core devices.

Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

Tebe to hal zeza... Ako imas /etc/X11/xorg.conf - backup-uj ga i brisi, a ako nemas onda si s*** out of luck...

I koliko vidim tebi nije aktuelna verzija ni pixman-a ni xservera (ceo xorg ti je matoriji), ajde promeni repo i update-uj prvo...

Otvori /etc/pacman.d/mirrorlist pa onda udari # ispred svake linije a ostavi samo prvi francuski enable-ovan (http://mir.archlinux.fr) i onda pacman -Syu


Mada nije mi jasno kako se onda logujes kao root, mozda imas i problema sa dozvolama. Jel mozes da mi kazes jel ti se to odjednom zeznuo x ili posle update-a ili nikad nije ni radio...

---

Radi mi normalno vec dva meseca. Mada sam instalirao gomolu programa a nisam ni jednom odradio update.
Jednostavno sam restartovao prepodne jer mi je iz nekog razloga zakucao JDownloader.
I kasnije od x servera samo problem.

Na mestu je X11/xorg.conf

Sad cu odraditi update , kako si objasnio.
Ovo mi nije bas jasno!
Da ne kazem bas je " neprijatno " da tako odejednom prsne.
Bez razloga nista nisam uradio!
Hvala
Javljam sta se desava.

Odradio sam update. I stanje je isto!
Probao sam cisto da izbrisem fam i hal iz /rc.conf, irestartovao komp.
Nista se nije desilo.
Mogu u x samo kad sam root.

Ajde probaj da podignes x preko inittab-a a ne rc.conf-a

Dakle izbaci iz DAEMONS sekcije u rc.conf gdm i edituj /etc/inittab (poremuj id:3 i odremuj id:5 gore i dole isto odremuj gde imas liniju za gdm). Ovako nesto:



Ako kojim slucajem uopste ne mozes da se ulogujes posle ovoga, kada restartujes i kada ti se pojavi grub pritisni taster E na Arch liniju i opet E na liniju gde ti je vmlinuz i na kraj te linije dodaj samo broj 3
B ti je posle za boot... Moci ces tako da udjes u terminal.

---

Combuster jedno duboko izvinjenje.
Nisam imao vremena da radim duze na ovom problemu, mada znam da bi mi ovo iskustvo bilo dragoceno.
Morao sam brze da osposobim sistem zbog posla.
Pa sam ponovo instalirao Arch i sve je ok.

Mada su mi mnogi programi radili cak i blender , ali wine nije hteo da potegne fotoshop.
I tu je nastao kritican problem.

Mnogo ti zahvaljujem jos jednom sracni preznici.

Hehehehe, nekad je to i najpametnije resenje, ko zna sta se zeznulo... Hvala, tebi takodje !

---

Hm, evo sad sam ponovo re-instalirao Arch na NetBook (ovaj put na HDD, ne na SSD, makao sam Win7 skroz),
i kada se instalirao GRUB i restartovao, dobio sam error, morao sam da izeditujem hd1,1 u hd0,1...

(grub sam stavio na HDD, na /dev/sdb u MBR, i posle nisam menjao boot order u biosu.

Znaci ume malo grub da se za'ebe... ali se relativno lako resava.

setup:

/dev/sda - SSD, 4gb - ostavio raw, videcu posle sta cu s tim, mozda neku kriptovanu particiju za dokumeta... :)
/dev/sdb1 - 2GB swap
/dev/sdb2 - root 15GB
/dev/sdb3 - ostavio raw (tu ce podaci do kraja diska od 160GB, samo cu jos da vidim koji FS da stavim, to posle kad sredim OS, verovatno isto ext4 kao za root)

---