ICS na RH 9.0 problem

Situacija je sljedeca:
Imam dva kompjutera od kojih je jedan Linux Red Hat 9.0 a drugi Windows XP Professional.Ne mogu sloziti Red Hat da radi ICS za Windows-e.Nakon definiranja statickih IP adresa za oba dva kompjutera 192.168.0.1 ; 192.168.0.2, definiranja linux-a kao router-a: # echo 1 > /proc/sys/net/ipv4/ip_forward i odredjivanja linux stroja kao default gateway-a za Windows-e, dogadja se sljedece: Windows-i pingaju linux eth0, pingaju i linux ippp0, ali kada probam ping na neku vanjsku IP adresu, nista! Nije aktivan iptables, ipchains i sl.

Help!!!

Potpis

if your erection last more than four hours, seek immediate medical attention!

dodaj ovo pa ce raditi.

# Load the NAT module (this pulls in all the others).
modprobe iptable_nat

# Turn on IP forwarding
echo 1 > /proc/sys/net/ipv4/ip_forward

# In the NAT table (-t nat), Append a rule (-A) after routing (POSTROUTING)
# which says to MASQUERADE the connection (-j MASQUERADE).
/usr/sbin/iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -j MASQUERADE

# Allows forwarding specifically to our LAN
/usr/sbin/iptables -A FORWARD -s 192.168.0.0/24 -j ACCEPT

Potpis

http://speedy-order.com

Hvala za ove informacije.
Vidim da je u igri neki .conf file.Reci mi jos o kom file-u je rijec.

Potpis

if your erection last more than four hours, seek immediate medical attention!

Vidim attachment, sorry. :)

Potpis

if your erection last more than four hours, seek immediate medical attention!