Tema
Registracija

Slackware 12 problem sa Refresh rate nvidia driver

Odgovori Nova tema
Štampanje RSS teme Kopiraj vezu do teme Idi na poslednju poruku
  • 6 odgovora
  • 3.969 pregleda
Slackware 12 problem sa Refresh rate nvidia driver 04.10.2008. u 20:21 · pre 219 meseci #1

Istalirao sam Slackware 12 i sveje bilo ok dok nisam istalirao driver NVIDIA-Linux-x86-173.14.12-pkg1,
Ne mogu da podesim refresh rate veci od 53 katastrofa koliko moze da boli galava od monitora.
Jasno mi je da treba da podesim u etc/X11/xorg.conf, HorizSync i VertRefresh .
Ali mi nije jasno gde upisati vrednosti da bi sve bilo ok!!!
Monitor je samtron 76v
Horizontal 30-70KHz
Vertical 50-160Hz
DisplaySize 312 x 234mm
VESA Ergo VGA 640 x 480@72, 75, 85Hz
800 x 600@56, 60, 72, 75, 85Hz
1024 x 768@87i , 60, 70, 72, 75, 85Hz

Nvidija GeForce 8600 GT.

Ovo je koj sadasnji xconf::

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder57) Thu Jul 17 18:39:19 PDT 2008

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi/:unscaled"
EndSection

Section "Module"
Load "xtrap"
Load "record"
Load "glx"
Load "dbe"
Load "extmod"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"

### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Unknown Board"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

Molim vas ako neko moze da pojasni .Hvala unapred POZDRAV
Re: Slackware 12 problem sa Refresh rate nvidia driver 04.10.2008. u 21:02 · pre 219 meseci #3
Upiši u sekcije

Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samtron 76v"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
# Users of reduced blanking now need:
# Option "ReducedBlanking"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
# If you experience flickering, try setting the following line in
# the Device section of your xorg.conf file:
# Option "HWCursor" "false"
Identifier "Videocard0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "GeForce 8600 GT"
# http://gentoo-wiki.com/Xorg/Transparency#Nvidia_.2B_Xorg
Option "RenderAccel" "true"
EndSection
Potpis
FreeBSD[/
url]
[url=http://www.freebsd.org/doc/en/boo
ks/handbook/index.html]FreeBSD
Handbook
FreeBS
D Forumi
GhostBSD[/url
]
[url=http://www.sysresccd.org/]System
Rescue CD
Re: Slackware 12 problem sa Refresh rate nvidia driver 05.10.2008. u 13:12 · pre 219 meseci #4

Upsao sam sekcije sada nece da pdigne xserver!!
Kada sam uneo :
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Samtron 76v"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS'
# Users of reduced blanking now need:
# Option "ReducedBlanking"
EndSection
Sve je bilo ok ali i dalj je Refresh bio 50.

Posle sam dodao ostale sekcije nije hteo da ga podigne pise.
Fatal Server error
No screens fouhd
giving up
XINIT :connetion reset bypeer (errno 104)
XINIT :no such process (errno 3)

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder57) Thu Jul 17 18:39:19 PDT 2008

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi/:unscaled"
EndSection

Section "Module"
Load "record"
Load "glx"
Load "dbe"
Load "xtrap"
Load "extmod"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Samtron 76v"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS'
# Users of reduced blanking now need:
# Option "ReducedBlanking"
EndSection

Section "Device"

### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
# If you experience flickering, try setting the following line in
# the Device section of your xorg.conf file:
# Option "HWCursor" "false"
Identifier "Videocard0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "GeForce 8600 GT"
# http://gentoo-wiki.com/Xorg/Transparency#Nvidia_.2B_Xorg
Option "RenderAccel" "true"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

Bas gadno stanje!!!
Jer ima pomoci ??

Jos mi se jednom ovakava siruacija desila kad sam upisao u BoardName (( "GeForce 8600 GT" ))
Re: Slackware 12 problem sa Refresh rate nvidia driver 05.10.2008. u 13:23 · pre 219 meseci #5
Postuj tačno poruku koju dobijaš kad pokušaš podići X.

Tu je opisano šta je greška, i po tome se može videti šta treba dalje da se radi.
Potpis
FreeBSD[/
url]
[url=http://www.freebsd.org/doc/en/boo
ks/handbook/index.html]FreeBSD
Handbook
FreeBS
D Forumi
GhostBSD[/url
]
[url=http://www.sysresccd.org/]System
Rescue CD
Re: Slackware 12 problem sa Refresh rate nvidia driver 06.10.2008. u 00:43 · pre 219 meseci #6
Hvala na pomoci !!!!!!
Namestio sam xhorg radi sve kako treba.

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder57) Thu Jul 17 18:40:12 PDT 2008

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder57) Thu Jul 17 18:39:19 PDT 2008

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi/:unscaled"
EndSection

Section "Module"
Load "dbe"
Load "record"
Load "xtrap"
Load "extmod"
Load "glx"
Load "freetype"
Load "type1"
EndSection

Section "ServerFlags"
Option "Xinerama" "0"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "STN S/T 76V"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
EndSection

Section "Device"

### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Unknown Board"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GT"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1024x768_85 +0+0; nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSec tion

HVALA JOS JEDNOM POZDRAV VLADOAR
Odgovori
Prijavite se da biste odgovorili u ovoj temi.PrijavaRegistracija

Premeštanje teme