|
bventil
desp
Član broj: 67391
Poruke: 50
213.137.127.*
Sajt: www.geocities.com/bope999
|
Danas sam na jednom lap-topu gde je vec bila instalirana vista, instalirao XP na drugoj particiji. Nije bilo problema, ali.. Kada se startuje comp on automatski ucitava XP. Kako da namestim da me na pocetku pita koji OS hocu.
Koliko kontam, trebalo bi da u boot.ini upisem jos jedan red, ali ne znam sta?
Pokusao sam preko ControlPanel/System/Advanced/Settings, ali on prijavljuje da postoji samo jedan OS (tj. XP).
I otkud to da se po defaultu startuje prvo XP, a ne vista?
Za svaki slucaj jos jedna info: na C:\ je vista, a na D:\ je XP.
Hvala.
|
|
|
| |
|
|
Slobodan Trebovac
Banja Luka
Član broj: 40266
Poruke: 1088
87.250.121.*
|
VistaBootPRO
Ubuduce, uvijek prvo instaliraj stariji (XP), pa tek onda noviji (Vista) OS.
tyranBL
|
|
|
| |
|
|
zoran_dojkic
Član broj: 105358
Poruke: 1688
PPP-01-59.beobug.com.
|
Već je bila instalirana Vista. Nema razloga da sve briše.
Easy BCD http://neosmart.net/dl.php?id=1
|
|
|
| |
|
|
Slobodan Trebovac
Banja Luka
Član broj: 40266
Poruke: 1088
87.250.121.*
|
Zar je neko spominjao brisanje?
tyranBL
|
|
|
| |
|
|
bventil
desp
Član broj: 67391
Poruke: 50
213.137.127.*
Sajt: www.geocities.com/bope999
|
Nemam instalaciju Viste. Kao sto rekoh vec je bila na tom compu.
Tako da cu probati taj EasyBCD.
Mada videh na linku "brisanje" jos jedno resenje, bez ikakvih dodataka.
Hvala puno obojici!
|
|
|
| |
|
|
HAX
Homa Alex
Član broj: 13631
Poruke: 34
*.adsl-1.sezampro.yu.
|
Povuci kocnicu!
Citiram :
How to Install XP after Vista
Below is the way I installed XP on my computer, after Vista was already installed... creating a dual boot.
First find the drivers for your network components, wireless card or nic, and save them to an external device such as a floppy disk or flash drive.
Then you will need to go into the BIOS on your computer startup. Scroll to the System Configuration tab and go down to the SATA Native Support and change its setting to Disabled. Then hit F10 to Save and Exit.
Next, insert your Windows XP CD and create the partition you wish to install XP on. After the installation is complete you should boot automatically into XP.
Now you need to move some files. First, make sure you have set your folder options to see hidden files and to show protected operating system files. Then open Windows Explorer and go to the drive where Vista is installed. Copy the folder Boot, and the files bootmgr, boot.ini, NTDETECT.COM and ntldr and paste them to the root of your XP drive.
Then download Vista Boot Pro and save it to your desktop or somewhere else that you can easily access. Unless you already have .Net Framework (v2.0 at least) it will redirect you to a Microsoft page where you can download this necessary component.
Install and run Vista Boot Pro and open the "Bootloader" tab. Select "Reinstall the Vista bootloader" and press Apply. Then go to the Manage OS Entries tab and select "Add new operating system entry" and make sure you select "Windows Legacy". Give the new entry a name (ie: Windows XP) and select the drive letter you have XP on and then select Apply. You can also choose which entry you would like as the default the system will boot to.
And now you should be able to dual boot between Vista and a previous OS.
Kraj citata.
Ima tu jos par caka, npr na mom IBM se ne zove opcija za sata tako nego malo drugacije.
Procitaj pazljivo i kako se Sata driver instalira u vec postojeci XP, ako ti treba to.
Kod mene sve radi kao sat(a).
|
|
|
| |
|
Kako birati OS, od instalirana 2?