Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.

SONY DSR 1500AP kako podesiti kontrolu uredjaja pri Capture?

[es] :: Video produkcija :: SONY DSR 1500AP kako podesiti kontrolu uredjaja pri Capture?

[ Pregleda: 2632 | Odgovora: 2 ] > FB > Twit

Postavi temu Odgovori

Autor

Pretraga teme: Traži
Markiranje Štampanje RSS

Cileinteractiv
Zoran Petrovic
Isurance agent
VIG
Lokacija: Novi Sad

Član broj: 43360
Poruke: 2738
*.eunet.yu.



+3 Profil

icon SONY DSR 1500AP kako podesiti kontrolu uredjaja pri Capture?08.06.2007. u 16:21 - pre 212 meseci
Problem je sledeci. Imamo jedan Sony DVCam rekorder. Capture radimo u Avid Xpress i Premiere Pro 2, problem je sto se ne moze iz opcija za kontrolu pri snimanju premotavati traka i kontrolisati uredjaj iz same aplikacije. Na Adobe-ovom sajtu sam video da ovaj uredjaj nije ni podrzan za kontrolu preko FW-a pa sam pokusao sa serijskom vezom RS 232 medjutim, i tu ima problema, Premiere stalno prijavljuje gresku i "kaze" da treba provetiti vezu i podesavanja, sve kombinacije sam isprobao i ne radi. Ima li neko resenje za?
 
Odgovor na temu

Igy81

Član broj: 20661
Poruke: 192
85.158.38.*



+1 Profil

icon Re: SONY DSR 1500AP kako podesiti kontrolu uredjaja pri Capture?11.06.2007. u 21:44 - pre 212 meseci
Na netu sam naletio na ovo, tip je imao isti problem samo na MAC-u G5 sa Final Cut Pro 5.

A ovo mu je pomoglo.
Citat:
To clarify, the video output on the display is not relevant to you right now, because you are interested in firewire. The flashing iLink tells you that you will have video and audio input and output via firewire. You should still have the option of SDI, composite or component output (if your deck is so equipped) while still having firewire input and output.

This means you can monitor the deck with an external monitor at the same time, which may be beneficial. You can use the deck's character output from the composite output spigot. This will allow you to get a full view of the menu options so you can more easily see what you are doing. Otherwise, you need to step through using the window on the face of the deck, which is more difficult to navigate, especially if you are unfamiliar with the deck.

You need to hit the "Menu" button on the face of the deck, Navigate to the "Setup Menu". In the "Setup Menu", you want to select "Interface". In the "Interface" options, you have your choice of "iLink" or "9-Pin". I'd almost bet you a nickel it's set for 9-pin. Change it to iLink. Hit "Set" on the face of the deck to make the change stick, and the hit the "Menu" button on the face of the deck again to get you out of the Menu, and as long as your FW cable is good, and the control switch is in remote, you should be in business.

It's a lot easier if you have a monitor connected to the composite output.


Nadam se da je i tebi bilo od pomoci...

Pozdrav.
 
Odgovor na temu

Cileinteractiv
Zoran Petrovic
Isurance agent
VIG
Lokacija: Novi Sad

Član broj: 43360
Poruke: 2738
*.eunet.yu.



+3 Profil

icon Re: SONY DSR 1500AP kako podesiti kontrolu uredjaja pri Capture?21.06.2007. u 14:56 - pre 211 meseci
Igy puno ti hvala na pomoci. Uspeo sam iako je navigacija po meniju prava nocna mora.
 
Odgovor na temu

[es] :: Video produkcija :: SONY DSR 1500AP kako podesiti kontrolu uredjaja pri Capture?

[ Pregleda: 2632 | Odgovora: 2 ] > FB > Twit

Postavi temu Odgovori

Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.