Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.

Lucent modem is busy

[es] :: Linux mreže :: Lucent modem is busy

Strane: 1 2 3

[ Pregleda: 9956 | Odgovora: 51 ] > FB > Twit

Postavi temu Odgovori

Autor

Pretraga teme: Traži
Markiranje Štampanje RSS

gogi100
Goran Ljubic

Član broj: 40722
Poruke: 979
212.200.42.*



+3 Profil

icon Lucent modem is busy26.09.2005. u 21:24 - pre 192 meseci
Imam Fedoru core 4.Instalirao sam drajvere za moj lucent modem.
U KPPP-u lucent se nalazi podesio sam i konekciju.Modem je na portu ttyS2 i non stop izbacuje modem is busy.Stavljao sam modem i na ttyS0 i ttyS1 i kad pokusam da se konektujem on izbaci modem is initializing i tako stoji.Pretrazio sam i ovaj forum i nasao da treba postaviti modem na /dev/ttyLT0. Kako ovo uraditi?Negde pise da treba raditi preko programa minicom.Da li neko moze da mi da uputstvo kako ovo uraditi ili uraditi nesto drugo da bi modem proradio?
Hvala
 
Odgovor na temu

tdjokic
Tomislav Djokic
u penziji
Beograd

Član broj: 6736
Poruke: 8305
*.COOL.ADSL.VLine.Verat.NET.

Sajt: www.distrowatch.com


+209 Profil

icon Re: Lucent modem is busy26.09.2005. u 23:57 - pre 192 meseci
ttyS0, ttyS1... su seriski portovi (com 1 i slicno). Idi u kppp na isto mesto gde si podesio na ttyS0 pa promeni na /dev/modem ili to sto sam kazes. Tamo se menja. Najprostija provera modema, bilo sta da menjas, je da pritisnes na Query - ako zvrcka i daje tamo gomilu podataka, znaci da ce raditi, ako pocne da prica kako je zauzet ili se inicira - nista od toga.
Na svetu postoje samo 2 OS-a: 1. Mint, 2. svi ostali!
 
Odgovor na temu

gogi100
Goran Ljubic

Član broj: 40722
Poruke: 979
212.200.42.*



+3 Profil

icon Re: Lucent modem is busy27.09.2005. u 06:41 - pre 192 meseci
Nakon pritiska na taster query izbaci prozor sa rezultatima ali nema nicega.Sta je to u pitanju
 
Odgovor na temu

jesus alejandro
jesus alejandro

Član broj: 11084
Poruke: 310

Sajt: www.audax.rs


+9 Profil

icon Re: Lucent modem is busy27.09.2005. u 08:46 - pre 192 meseci
Ako si instalirao odgovarajuce drajvere za Lucent modem (proveri da li je u pitanju V90 odnosno stariji Lucent ili V92, noviji) on bi trebalo da se nalazi na /dev/modem (odnosno to mu je simbolicki link, on se stvarno nalazi na recimo ttyS1 ukoliko je u windowsu na COM2 ili recimo ttyS0 ako je u winu na COM1). U KPPP-u iskljuci opciju wait for dial tone i u modem comands ubaci ispod komande ATZ ATX3. Sad probaj query modem. Ako se nista ne pojavljuje probaj od pocetka da instaliras ali potrazi odgovarajuce drajvere posto je velika verovatnoca da ne radi sa tim koje ti imas.
Prvo hopni pa reci skoč.
 
Odgovor na temu

gogi100
Goran Ljubic

Član broj: 40722
Poruke: 979
212.200.42.*



+3 Profil

icon Re: Lucent modem is busy27.09.2005. u 14:16 - pre 192 meseci
Pokusao sam sa ovim da stavim umesto "ttyS" "/dev/modem" i sa komandom ATX3 ali modem ne reaguje.
Koristio sam i program Scanmodem i evo sta je u fajlu ModemData.txt zapisano



DO use the following line as the email Subject Line, to alert cogent experts:
scanModem, Fedora Core release 3 (Heidelberg)
Kernel kernel 2.6.9-1.667
Occassionally reponses are blocked by an Internet Provider mail filters.
So do in a day also check the Archived responses at [email protected]
Code updated on: 2005_Sept_20
------------ -------------- System information ------------------------
Fedora Core release 3 (Heidelberg)
Kernel
on System with processor: i686
currently under kernel: 2.6.9-1.667

The kernel-2.6.9-1.667 was compiled with CONFIG_REGPARM, providing more compact and faster code.

The kernel was assembled with compiler: 3.4.2
with current System compiler GCC=3.4.2

Checking for kernel-headers needed for compiling.
The kernel-headers have base folder:
/lib/modules/2.6.9-1.667/buildDO use the following line as the email Subject Line, to alert cogent experts:
scanModem, Fedora Core release 3 (Heidelberg)
Kernel kernel 2.6.9-1.667
Occassionally reponses are blocked by an Internet Provider mail filters.
So do in a day also check the Archived responses at [email protected]
Code updated on: 2005_Sept_20
------------ -------------- System information ------------------------
Fedora Core release 3 (Heidelberg)
Kernel
on System with processor: i686
A /dev/modem symbolic link is not set.
Checking for modem symbolic link support lines within /etc/udev/ files

USB modem not detected.

00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50)

Modem candidates are at PCI_buses: 00:10.0

Providing detail for device at 00:10.0
with vendor-ID:device-ID
----:----
Class 0780: 11c1:0442 Communication controller: Agere Systems (former Lucent Microelectronics) 56k WinModem (rev 01)
SubSystem 13e0:0412 GVC Corporation LT WinModem 56k Data+Fax+Voice+VoiceView+Dsvd
Flags: bus master, medium devsel, latency 0, IRQ 5

-----PCI_IDs------- --CompilerVer-
Feature List: Primary Subsystem Distr KernelVer kernel default CPU
./scanModem test 11c1:0442 13e0:0412 redhat 2.6.9-1.667 3.4.2 3.4.2 i686

== Checking PCI IDs through modem chip suppliers ==

There are some installer packages
and also resources for compiling drivers:

The modem has a supported Lucent/Agere DSP (digital signal processing) chipset
with primary PCI_ID: 11c1:0442
DSP=1

Agere Systems, Inc provides periodic software releases for theirDSP modems,
which are made more Newbie friendly by volunteers or Linux distros.
Browse http://linmodems.technion.ac.il/Ltmodem.html for older information.

SuSE/Novell Linux and some other Distros provide compiled drivers +installers.
Search package lists for ltmodem
For other Distros and 2.6.n kernels, browse:
http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/
ltmodem-2.6-alk-7b.tar.gz has the most general instructions for installations,
and the core code is used in:
ltmodem-8.31b1.tar.gz , which automates the processes;
ltmodem-2.6-7alk.src.rpm can be used for rpm using Distros.
# rpmbuild --rebuild ltmodem-2.6-7alk.src.rpm
will deposit an installer at:
/usr/src/rpm/RPMS/i686/ltmodem-kv_2.6.9-1.667.rpm Check with
# ls -l /usr/src/rpm/RPMS/i686/ltmodem*
Then install with:
# rpm -i /usr/src/rpm/RPMS/i686/ltmodem-kv_2.6.9-1.667.rpm
or similar.

http://ltmodem.heby.de has support for ISA card modems, Lucent/Agere chip PCMCIA card modems
and kernels 2.2.n through current 2.6.n (at least up to 2.6.11)
Packages for compiling drivers are:
ResourceName Use for kernel ranges
--------------------------------------------------------------------------------------------------
ltmodem-8.26a.tar.gz kernels 2.4.21 and earlier
ltmodem-8.30a3.tar.gz kernels 2.4.21 and subsequent 2.4.2n kernels
which were assembled with a gcc-2.9n comiler
ltmodem-8.31a10.tar.gz beginning with 2.4.21 through and into 2.6.n kernels
There are also numerous pre-compiled driver packages, though those for older kernels are at::
http://linmodems.technion.ac.il/packages/ltmodem/
See http://linmodems.technion.ac.il/resources.html#lucent for some special cases:
Knoppix, Demudi, etc
Some additional 2.4.n installers are available from:
http://dag.wieers.com/packages/kernel-module-ltmodem/ for some other 2.4.n installers


Vendor 11c1 corresponds to Lucent Technologies or subsidiary Agere Systems, Inc.
Information is at: http://www.agere.com/client/modem_dsp.html. Produced are both:
1) modems identifiable from their primary PCI IDs and
2) soft modem Subystem chips requiring identification through codec readouts.

Call waiting specified by, +pcw=1, is not implmented in the ltmodem drivers.
Configuration with forcing is described in: http://linmodems.technion.ac.il/archive-fifth/msg00055.html
0x0442 -- Mars 2 - data/fax/tam only
The device=0442 modems have an electro-optical coupling
which in some hardware is Not adequately supported by these drivers.


Many installers for RedHat are available at http://dag.wieers.com/packages/kernel-module-ltmodem

The desired installer name is like:
========================================
ltmodem-kv-2.6.9-1.667-8.31a10-1.i686.rpm
----------------------------------------
ltmodem-kv-Kernel_FL-LTver--.CPU.rpm explains the versioning.
For your System
Kernel_FL is 2.6.9-1.667 , the full kernel version displayed by: uname -r
LTver is 8.31a10, the release of the compiler kit
8.nn is the Agere core code designation.
The proccesor type or CPU is: i686 dispayed by: uname -m
used in compiling and assembling driver packages.

For usage with the udev file system of fedora core 3, see http://linmodems.technion.ac.il/archive-fifth/msg01177.html

A suitable installer is not available as of this 2005_Sept_20 update.
Check in the section fedora at http://ltmodem.heby.de/
for a subsequent Installer submission.
Older releases have been archived at:
http://linmodems.technion.ac.il/packages/ltmodem/archive/
Also there is a RPM search engine at: http://rpm.pbone.net
The closest match to your i686=CPU is recommended.
The closest match to your i686=CPU is recommended.
For example replacements in order of preference for an
i686 would be i586, i486 and i386
If not present use the ltmodem-8.31a10.tar.gz compiler kit.

The list of available Installers for fedora as of this 2005_Sept_20
is inserted into to Modem/YourModem.txt
======= PCI_ID checking completed ======
Update=2005_Sept_20
A PCMCIA CardBus is not detected on this System.
GCCversion=3.4.2

For information on modem port creation under the UDEV device file system see:
http://linmodems.technion.ac.il/archive-fourth/msg03299.html for Conexnant modems
http://linmodems.technion.ac.il/archive-fifth/msg01177.html for Lucent/Agere DSP modems

The following information blocks just query some ppp support items.

====================================================
grep -rs ppp /etc/modprobe.*
-------------------------------------
/etc/modprobe.conf.dist:alias tty-ldisc-3 ppp_async
/etc/modprobe.conf.dist:alias tty-ldisc-14 ppp_synctty
/etc/modprobe.conf.dist:alias ppp-compress-18 ppp_mppe
/etc/modprobe.conf.dist:install ppp-compress-21 /bin/true
/etc/modprobe.conf.dist:alias ppp-compress-24 ppp_deflate
/etc/modprobe.conf.dist:alias ppp-compress-26 ppp_deflate
-------------------------------------
PPP support module bsd_comp.ko not found!
Resident PPP support modules are properly uncompressed .
----active COMM services are ------------
eth0 Link encap:Ethernet HWaddr 00:05:5D:52:48:9F
inet6 addr: fe80::205:5dff:fe52:489f/64 Scope:Link
This COMM mode should be closed before using the modem, or DNS services may fail.
Be sure to read the Ethernet section of Modem/YourModem.txt
DEVPPP=crw------- 1 root root 108, 0 Sep 27 2005 /dev/ppp
A /dev/modem symbolic link is not present

No devfsd.conf file found, indicated absense of the devfsd daemon package
for device file system (devfs) symbolic link support.

DEVFSD=
---- dmesg queries -------

Beginning with Fedora 2 kernel-2.6.6-1.427, kernel-headers needed
for compiling drivers are provide at: /lib/modules/kernel-version/build/
Thus upgrading above kernel 2.6.5-1.358 to 2.6.6-* is Stongly Recommended

pppd version 2.4.2 may not be fully compatible with 2.6.8 kernel releases.
If an initial CONNECT is achieved without PPP being subsequently established,
drop back to a 2.4.1 version. This has worked for PCTEL AMR modem users,
supported by the http://www.smlink.com slmodem software.
Check pppd version with:
pppd --version
See http://linmodems.technion.ac.il/archive-fourth/msg03167.html


For kernel-version 2.4.20-8 , a failure in automatic loading of PPP related modules
has been reported. It was necessary to manually load with:
/sbin/modprobe /lib/modules/2.4.20-8/kernel/drivers/net ppp_generic
/sbin/modprobe /lib/modules/2.4.20-8/kernel/drivers/net ppp_deflate
/sbin/modprobe /lib/modules/2.4.20-8/kernel/drivers/net ppp_synctty
/sbin/modprobe /lib/modules/2.4.20-8/kernel/drivers/net ppp_async
or dialout efforts failed.

The Internet Configuration Wizard writes a configuration file:
/etc/ wvdial.conf
containing a line default line
Stupid Mode = yes
Better dialup performance may be achieved by commenting out this line as:
# Stupid Mode = yes
If the Smartlink slmodemd is used for port creation, an added line is necessary
Carrier Check = no
Also non-USA Users may need to add to the [Modem0] block:
Init2 = AT+GCI=hexadecimal_country_code
but test without it first.

redhat is not yet providing pre-compiled drivers for WinModems


Sta bi ja sad trebalo da radim?
 
Odgovor na temu

mmirilovic
Mladen Mirilović
Čačak

Član broj: 10462
Poruke: 721
*.com
Via: [es] mailing liste



+1 Profil

icon Re: Lucent modem is busy27.09.2005. u 14:23 - pre 192 meseci
Lucent modemi se nalaze na ttyLT0, ili nešto slično, a ne na ttyS0, ttyS1...
Na tim portovima se nalaze serijski modemi, koji se na računar kače preko
serijskog, RS232 porta.

Meni sve liči da je drajver neodgovarajući. Neodgovarajući kernelu ili čipsetu
na modemu. Skini skriptu scanModem.gz sa sajta
http://linmodems.technion.ac.il. Ovde na forumu ili na tom sajtu ćeš naći
kako da koristiš tu skriptu i čemu ona služi.

Koristi pretragu.
Pozdrav.
 
Odgovor na temu

mmirilovic
Mladen Mirilović
Čačak

Član broj: 10462
Poruke: 721
*.blueisp.co.yu.



+1 Profil

icon Re: Lucent modem is busy27.09.2005. u 14:45 - pre 192 meseci
Kako stojiš sa engleskim? Imaš detaljno upustvo o instalaciji u tom ModemData.txt fajlu koji si poslao. Pogledaj na sledećim stranama:
http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/
http://www.agere.com/client/modem_dsp.html
http://linmodems.technion.ac.il/archive-fifth/msg01177.html
http://ltmodem.heby.de/

Pozdrav.
 
Odgovor na temu

gogi100
Goran Ljubic

Član broj: 40722
Poruke: 979
212.200.42.*



+3 Profil

icon Re: Lucent modem is busy27.09.2005. u 16:44 - pre 192 meseci
A sta mislis da prebacim modem na ttyLT0?
Mozes li mi reci kako to da uradim?
 
Odgovor na temu

mmirilovic
Mladen Mirilović
Čačak

Član broj: 10462
Poruke: 721
*.com
Via: [es] mailing liste



+1 Profil

icon Re: Lucent modem is busy27.09.2005. u 17:19 - pre 192 meseci
Ovaj deo ModemData.txt, govori o tome kako da instaliraš tvoj modem:
Citat:
 For other Distros and 2.6.n kernels, browse:
 http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/

     ltmodem-2.6-alk-7b.tar.gz  has the most general instructions for
installations, and the core code is used in:
     ltmodem-8.31b1.tar.gz  , which automates the processes;

     ltmodem-2.6-7alk.src.rpm can be used for rpm using Distros.

           # rpmbuild --rebuild ltmodem-2.6-7alk.src.rpm  

           will deposit an installer at:

                /usr/src/rpm/RPMS/i686/ltmodem-kv_2.6.9-1.667.rpm
Check with  

            # ls -l   /usr/src/rpm/RPMS/i686/ltmodem*

            Then install with:

            # rpm -i /usr/src/rpm/RPMS/i686/ltmodem-kv_2.6.9-1.667.rpm

            or similar.

Dakle, informacije o instalaciji drajvera, kao i sam drajver možeš naći na
strani: http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/

Sa te strane skini fajlove: ltmodem-2.6-alk-7b.tar.gz i ltmodem-8.31b1.tar.gz,
ako hoćeš da instaliraš iz sorce koda. Raspakuj ove arhive u njima ćeš naći
upustvo kako da instaliraš modem. Pročitaj README i INSTALL fajlove.

Ako hoćeš da istaliraš iz RPM-a, skini sa strane koju sam ti naveo fajl:
ltmodem-2.6-7alk.src.rpm. Instaliraj modem uz pomoć sledećih komandi, koje
ćeš da ukucaš u konzoli kao root:
Citat:
# rpmbuild --rebuild ltmodem-2.6-7alk.src.rpm
# rpm -i /usr/src/rpm/RPMS/i686/ltmodem-kv_2.6.9-1.667.rpm

Ako ti prijavi neke greške, javi se ponovo, i prenesi ovde te greške...

Inače, instaler će sam napraviti /dev/modem i /dev/ttyLT0.

Inače, ti nemaš Fedoru Core 4, već 3.
Pozdrav.
 
Odgovor na temu

gogi100
Goran Ljubic

Član broj: 40722
Poruke: 979
212.200.42.*



+3 Profil

icon Re: Lucent modem is busy27.09.2005. u 18:54 - pre 192 meseci
Skinuo sam ovaj fajl ltmodem-2.6-7alk.src.rpm
i kad sam ukucao ove komande:

# rpmbuild --rebuild ltmodem-2.6-7alk.src.rpm
# rpm -i /usr/src/rpm/RPMS/i686/ltmodem-kv_2.6.9-1.667.rpm

izbacio mi je sledece:


Installing ltmodem-2.6-7alk.src.rpm
warning: user stefan does not exist - using root
warning: group stefan does not exist - using root
warning: user stefan does not exist - using root
warning: group stefan does not exist - using root
warning: user stefan does not exist - using root
warning: group stefan does not exist - using root
error: Failed build dependencies:
kernel-source >= 2.6 is needed by ltmodem-2.6-7.i386
[[email protected] ~]# # rpm -i /usr/src/rpm/RPMS/i686/ltmodem-kv_2.6.9-1.667.rpm

Kako to da imam Fedoru 3 kad sam instalirao sa CD-a koji je izdao casopis Micro i pise da je Fedora 4?
 
Odgovor na temu

jesus alejandro
jesus alejandro

Član broj: 11084
Poruke: 310

Sajt: www.audax.rs


+9 Profil

icon Re: Lucent modem is busy27.09.2005. u 22:34 - pre 192 meseci
Citat:
gogi100:

------------ -------------- System information ------------------------
Fedora Core release 3 (Heidelberg)
Kernel
on System with processor: i686
currently under kernel: 2.6.9-1.667



Ovde lepo pise da je Fedora Core 3, a kako, pa najbolje da pitas ljude iz Micra koji su izdali taj disk. Sto se tice samog modema najbolje da skines source i da ga iskompajliras, znaci nikako rpm. Moj ti je savet da probas sa ovim drajverom koji sigurno radi na Fedori Core 3 i LT modem (mada je u pitanju verzija Lucent V90, ne znam kako se ponasa sa novijim V92) http://www.physcip.uni-stuttga...ltmodem/ltmodem-8.31a10.tar.gz . Znaci skines drajver, raspakujes ga u nekom folderu, pozicioniras se u taj folder (odnosno u podirektorijum pod nazivom source ako se dobro secam) i kao root kucas:
$ ./configure
$ make
$ make install

ako ni posle ovoga ne radi verovatno nije u pitanju taj modem.
Prvo hopni pa reci skoč.
 
Odgovor na temu

jesus alejandro
jesus alejandro

Član broj: 11084
Poruke: 310

Sajt: www.audax.rs


+9 Profil

icon Re: Lucent modem is busy27.09.2005. u 22:39 - pre 192 meseci
Posto prethodni link malo radi, malo ne radi skini drajver sa ovog linka http://www.sfu.ca/~cth/ltmodem/ltmodem-8.31a10.tar.gz .
Prvo hopni pa reci skoč.
 
Odgovor na temu

mmirilovic
Mladen Mirilović
Čačak

Član broj: 10462
Poruke: 721
*.com
Via: [es] mailing liste



+1 Profil

icon Re: Lucent modem is busy28.09.2005. u 09:25 - pre 192 meseci
U vezi greške koju si dobio. Moraš da instaliraš source kernela. Verovatno ga
imaš na instalacionom disku.

Ona skripta, scanModem, kaže da imaš FC3. Izvrši "uname -a" u konzoli. To bi
trebalo da ti kaže koju distribuciju koristiš, koju verziju kernela itd...
Pozdrav.
 
Odgovor na temu

gogi100
Goran Ljubic

Član broj: 40722
Poruke: 979
212.200.42.*



+3 Profil

icon Re: Lucent modem is busy28.09.2005. u 13:19 - pre 192 meseci
kako ide procedura instalacije source kernela?Sta mislis da li je potrebno upgrade kernela na neku visu verziju?Mozda bi modem proradio?
 
Odgovor na temu

mmirilovic
Mladen Mirilović
Čačak

Član broj: 10462
Poruke: 721
*.com
Via: [es] mailing liste



+1 Profil

icon Re: Lucent modem is busy28.09.2005. u 14:21 - pre 192 meseci
Ne treba ti upgrade. Ne koristim fedoru. Ona sigurno ima neki program za
podešavanje sistema, za instaliranje dodatnih paketa sa instalacionih
diskova. Pokreni taj program i iz njega instaliraj source kernela.

Drugi način je da na diskovima nađeš paket koji se zove slično ovako
„kernel-source-bla-bla.rpm“. I njega instaliraš sa komandom:
rpm -i /putanja_do_tog_rpm_source_kernela/kernel-source-bla-bla.rpm
To moraš da uradiš kao root.

Inače, šta ti je dala komanda „uname -a“?
Pozdrav.
 
Odgovor na temu

gogi100
Goran Ljubic

Član broj: 40722
Poruke: 979
212.200.42.*



+3 Profil

icon Re: Lucent modem is busy28.09.2005. u 16:44 - pre 192 meseci
komandom "uname -a" dobio sam sledece :
"Linux 192.168.10.1 2.6.9-1.667 #1 Tue Nov 2 14:41:25 EST 2004 i686 i686 i386 GNU/Linux"
 
Odgovor na temu

jesus alejandro
jesus alejandro

Član broj: 11084
Poruke: 310

Sajt: www.audax.rs


+9 Profil

icon Re: Lucent modem is busy28.09.2005. u 18:29 - pre 192 meseci
Verzija kernela koju imas je 2.6.9 sto znaci da imas instaliran Fedoru Core 3 posto Core 4 ima verziju kernela 2.6.11. Sto se tice same instalacije kernela on se instalira iz programceta za instalaciju paketa (znaci pokreni opciju install ...) Ne mogu da se setim tacno gde je ali naci ces je u meniju (verovatno pod system ili nesto slicno). Medju ponudjenim paketima nadji kernel. E sad ne znam zasto se zezas sa rpm-om kad sam ti lepo dao link za source drajvera. Skini ga, kompajliraj i vozi ...
Prvo hopni pa reci skoč.
 
Odgovor na temu

gogi100
Goran Ljubic

Član broj: 40722
Poruke: 979
212.200.42.*



+3 Profil

icon Re: Lucent modem is busy28.09.2005. u 21:55 - pre 192 meseci
Pokusao sam prvo sa komandama za fajl " ltmodem-2.6-7alk.src.rpm"

# rpmbuild --rebuild ltmodem-2.6-7alk.src.rpm
# rpm -i /usr/src/rpm/RPMS/i686/ltmodem-kv_2.6.9-1.667.rpm
dobio sam sledece:
"Installing ltmodem-2.6-7alk.src.rpm
warning: user stefan does not exist - using root
warning: group stefan does not exist - using root
warning: user stefan does not exist - using root
warning: group stefan does not exist - using root
warning: user stefan does not exist - using root
warning: group stefan does not exist - using root
error: Failed build dependencies:
kernel-source >= 2.6 is needed by ltmodem-2.6-7.i386
[[email protected] ~]# # rpm -i /usr/src/rpm/RPMS/i686/ltmodem-kv_2.6.9-1.667.rpm"

onda sam za fajl "ltmodem-8.31a10" kucao komande :
$ ./configure
$ make
$ make install

pozicioniram se u direktorijum gde je raspakovana arhiva "ltmodem-8.31a10" i kad ukucam ./configure
dobijem
"bash: ./configure: No such file or directory"

a kad pokusam sa
make
dobijem
"make: *** Nijedna meta nije navedena, niti je ijedan makefile pronađen. Zaustavi."

sta da radim?
dobio sam savet da mi treba source kernel ili source driver pa da njih instaliram.
stvarno ne znam sta da radim?
 
Odgovor na temu

jesus alejandro
jesus alejandro

Član broj: 11084
Poruke: 310

Sajt: www.audax.rs


+9 Profil

icon Re: Lucent modem is busy28.09.2005. u 22:11 - pre 192 meseci
Jao batice ti bas ne citas sta pisem. Kad raspakujes ovaj fajl dobijes folder koji bi trebalo da se zove ltmodem-8.31a10, udjes u taj folder a zatim u folder source. U kad si u folderu source kucaj ./configure pa ostalo sto sledi. Ajde probaj, pa javi.
Prvo hopni pa reci skoč.
 
Odgovor na temu

mmirilovic
Mladen Mirilović
Čačak

Član broj: 10462
Poruke: 721
*.com
Via: [es] mailing liste



+1 Profil

icon Re: Lucent modem is busy28.09.2005. u 22:26 - pre 192 meseci
Moraćeš, neizostavno da instaliraš taj source kernela. Bez toga ne možeš da
instaliraš ni RPM , ni source drajvera!
Pozdrav.
 
Odgovor na temu

[es] :: Linux mreže :: Lucent modem is busy

Strane: 1 2 3

[ Pregleda: 9956 | Odgovora: 51 ] > FB > Twit

Postavi temu Odgovori

Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.