Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.

Problem sa modemom

[es] :: Linux mreže :: Problem sa modemom

[ Pregleda: 4508 | Odgovora: 6 ] > FB > Twit

Postavi temu Odgovori

Autor

Pretraga teme: Traži
Markiranje Štampanje RSS

oadar
Pop-Tosic Milorad
Beograd

Član broj: 4523
Poruke: 38
*.verat.net



Profil

icon Problem sa modemom19.08.2002. u 22:05 - pre 236 meseci
Imam modem Intel HaM MD5628D-L-A. Nasao sam Linux drajvere na internetu i pokusao da ga instaliram ali kada izdam komandu:
make install
on mi izbaci kako nema ham.o modula. U cemu je stvar?
 
Odgovor na temu

B o j a n
eCTRL
EU

Član broj: 1178
Poruke: 2925
*.verat.net

Jabber: bc@default.co.yu
Sajt: default.co.yu/~bc


+1 Profil

icon Re: Problem sa modemom20.08.2002. u 02:42 - pre 236 meseci
Zdravo pope,

ako mislis da ti neko pomogne oko toga, posalji CEO output, zajedno sa dmesg(1) i cat /proc/pci outputom.

"It's okay, I'm just admiring to the shape of your skull!" -- Dr. Gonzo
 
Odgovor na temu

oadar
Pop-Tosic Milorad
Beograd

Član broj: 4523
Poruke: 38
*.verat.net



Profil

icon Re: Problem sa modemom20.08.2002. u 13:56 - pre 236 meseci
Ovo izlazi kad uradi make clean
-------------------------------
cd coredrv; make clean
make[1]: Entering directory `/home/milorad/Desktop/new/coredrv'
rm -f *.o *~ core
make[1]: Leaving directory `/home/milorad/Desktop/new/coredrv'
cd serialdrv; make clean
make[1]: Entering directory `/home/milorad/Desktop/new/serialdrv'
rm -f *.o *~ core
make[1]: Leaving directory `/home/milorad/Desktop/new/serialdrv'
rm -f *.o
rm -f *.o

Ovo izlazi kad uradim make ham
------------------------------
[[email protected] new]# make ham
if [ -a /boot/vmlinuz.version.h ]; then \
cp /boot/vmlinuz.version.h /lib/modules/`uname -r`/build/include/linux/version.h; fi
cd coredrv; make \
"PSTN_DEF=-DTARGET_HAM -DDSP_CODE_800_SERIES -DTARGET_LINUX -DLINUX" \
ham;
make[1]: Entering directory `/home/milorad/Desktop/new/coredrv'
cc -DTARGET_HAM -DDSP_CODE_800_SERIES -DTARGET_LINUX -DLINUX -Wall -O -I /lib/modules/`uname -r`/build/include -I../inc -c -o coredrv.o coredrv.c
In file included from ../inc/hamdefs.h:65,
from ../inc/hamcore.h:39,
from coredrv.c:33:
/usr/include/linux/modversions.h:1:2: #error Modules should never use kernel-headers system headers,
/usr/include/linux/modversions.h:2:2: #error but rather headers from an appropriate kernel-source package.
/usr/include/linux/modversions.h:3:2: #error Change -I/usr/src/linux/include (or similar) to
/usr/include/linux/modversions.h:4:2: #error -I/lib/modules/$(uname -r)/build/include
/usr/include/linux/modversions.h:5:2: #error to build against the currently-running kernel.
make[1]: *** [coredrv.o] Error 1
make[1]: Leaving directory `/home/milorad/Desktop/new/coredrv'
make: *** [ham] Error 2

Ovo izlazi kad uradim make install
----------------------------------
bash haminst
running kernel 2.4.7-10
installing hamregistry, used for persistant storage
installing ham module
install: cannot stat `ham.o': No such file or directory
installing hamcore module
install: cannot stat `hamcore.o': No such file or directory
redhat hamboot rc2.d and rc3.d scripts
starting module and utilities
insmod: hamcore: no module by that name found
done


 
Odgovor na temu

oadar
Pop-Tosic Milorad
Beograd

Član broj: 4523
Poruke: 38
*.verat.net



Profil

icon Re: Problem sa modemom20.08.2002. u 13:58 - pre 236 meseci
Nastavak...

Ovo je /proc/pci
-----------------

PCI devices found:
Bus 0, device 0, function 0:
Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 3).
Master Capable. Latency=8.
Prefetchable 32 bit memory at 0xe4000000 [0xe7ffffff].
Bus 0, device 1, function 0:
PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (rev 0).
Master Capable. No bursts. Min Gnt=8.
Bus 0, device 4, function 0:
ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 64).
Bus 0, device 4, function 1:
IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6).
Master Capable. Latency=32.
I/O at 0xd800 [0xd80f].
Bus 0, device 4, function 2:
USB Controller: VIA Technologies, Inc. UHCI USB (rev 22).
IRQ 5.
Master Capable. Latency=32.
I/O at 0xd400 [0xd41f].
Bus 0, device 4, function 3:
USB Controller: VIA Technologies, Inc. UHCI USB (#2) (rev 22).
IRQ 5.
Master Capable. Latency=32.
I/O at 0xd000 [0xd01f].
Bus 0, device 4, function 4:
Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 64).
IRQ 9.
Bus 0, device 9, function 0:
Communication controller: PCI device 1813:4000 (Ambient Technologies Inc) (rev 2).
IRQ 5.
Non-prefetchable 32 bit memory at 0xd5800000 [0xd5800fff].
I/O at 0xa400 [0xa4ff].
Bus 0, device 13, function 0:
Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 16).
IRQ 5.
Master Capable. Latency=32. Min Gnt=2.Max Lat=24.
I/O at 0xa000 [0xa0ff].
Bus 0, device 17, function 0:
Unknown mass storage controller: Promise Technology, Inc. 20265 (rev 2).
IRQ 10.
Master Capable. Latency=32.
I/O at 0x9800 [0x9807].
I/O at 0x9400 [0x9403].
I/O at 0x9000 [0x9007].
I/O at 0x8800 [0x8803].
I/O at 0x8400 [0x843f].
Non-prefetchable 32 bit memory at 0xd5000000 [0xd501ffff].
Bus 1, device 0, function 0:
VGA compatible controller: nVidia Corporation NV11 (rev 178).
IRQ 11.
Master Capable. Latency=64. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xd6000000 [0xd6ffffff].
Prefetchable 32 bit memory at 0xd8000000 [0xdfffffff].

-----------------------------
Ovo je dmesg
-----------------------------
Linux version 2.4.7-10 ([email protected]) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)) #1 Thu Sep 6 16:46:36 EDT 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ffec000 (usable)
BIOS-e820: 000000000ffec000 - 000000000ffef000 (ACPI data)
BIOS-e820: 000000000ffef000 - 000000000ffff000 (reserved)
BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 65516
zone(0): 4096 pages.
zone(1): 61420 pages.
zone(2): 0 pages.
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Kernel command line: ro root=/dev/hde7
Initializing CPU#0
Detected 908.116 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1808.79 BogoMIPS
Memory: 253032k/262064k available (1279k kernel code, 6716k reserved, 91k data, 232k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([email protected])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf1150, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:04.0
Applying VIA southbridge workaround.
PCI: Disabling Via external APIC routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Simple Boot Flag extension found and enabled.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10d
block: queued sectors max/low 167978kB/55992kB, 512 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:04.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
PDC20265: IDE controller on PCI bus 00 dev 88
PCI: Found IRQ 10 for device 00:11.0
PDC20265: chipset revision 2
PDC20265: not 100% native mode: will probe irqs later
PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
ide2: BM-DMA at 0x8400-0x8407, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0x8408-0x840f, BIOS settings: hdg:DMA, hdh:DMA
hda: _NEC DV-5800A, ATAPI CD/DVD-ROM drive
hde: MAXTOR 4K040H2, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide2 at 0x9800-0x9807,0x9402 on irq 10
hde: 78198750 sectors (40038 MB) w/2000KiB Cache, CHS=77578/16/63, UDMA(100)
ide-floppy driver 0.97
Partition check:
hde: [PTBL] [4867/255/63] hde1 hde2 < hde5 hde6 hde7 hde8 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ide-floppy driver 0.97
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 319k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 232k freed
Adding Swap: 522072k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.259 $ time 16:59:02 Sep 6 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 5 for device 00:04.2
PCI: Sharing IRQ 5 with 00:04.3
PCI: Sharing IRQ 5 with 00:09.0
PCI: Sharing IRQ 5 with 00:0d.0
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 5 for device 00:04.3
PCI: Sharing IRQ 5 with 00:04.2
PCI: Sharing IRQ 5 with 00:09.0
PCI: Sharing IRQ 5 with 00:0d.0
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.251:USB Universal Host Controller Interface driver
EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide2(33,7), internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide2(33,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 8
0x378: readIntrThreshold is 8
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x10 cfgB=0x00
0x378: ECP settings irq=<none or set by other means> dma=<none or set by other means>
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport_pc: Via 686A parallel port: io=0x378
ip_conntrack (2047 buckets, 16376 max)
cm: version $Revision: 5.64 $ time 16:59:11 Sep 6 2001
PCI: Found IRQ 5 for device 00:0d.0
PCI: Sharing IRQ 5 with 00:04.2
PCI: Sharing IRQ 5 with 00:04.3
PCI: Sharing IRQ 5 with 00:09.0
cm: found CM8738 adapter at io 0xa000 irq 5
chip version = 037
cm: Enable SPDIF loop
ide-floppy driver 0.97
hda: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
 
Odgovor na temu

B o j a n
eCTRL
EU

Član broj: 1178
Poruke: 2925
*.verat.net

Jabber: bc@default.co.yu
Sajt: default.co.yu/~bc


+1 Profil

icon Re: Problem sa modemom20.08.2002. u 17:40 - pre 236 meseci
Citat:

Linux version 2.4.7-10


Koristis divlji, i nestandardni linux kernel, za koji nije predvidjen drajver koji pokusavas da instaliras. A i osim toga, lepo ti pise:
Citat:

Change -I/usr/src/linux/include (or similar) to
-I/lib/modules/$(uname -r)/build/include
to build against the currently-running kernel.


Instaliraj normalan kernel sa kernel.org i resi se bede.


"It's okay, I'm just admiring to the shape of your skull!" -- Dr. Gonzo
 
Odgovor na temu

oadar
Pop-Tosic Milorad
Beograd

Član broj: 4523
Poruke: 38
*.verat.net



Profil

icon Re: Problem sa modemom21.08.2002. u 00:26 - pre 236 meseci
Skinuo sam patch kernel 2.4.19 (koji bi trebao da je stabilan) ali, posto sam tek dva dana u Linuxu trebace mi pomoc oko patchovanja ovog mog kernela.
Mozes li mi opisati sta bi trebao da radim?
 
Odgovor na temu

oadar
Pop-Tosic Milorad
Beograd

Član broj: 4523
Poruke: 38
*.verat.net



Profil

icon Re: Problem sa modemom21.08.2002. u 23:05 - pre 236 meseci
Problem sam resio na sledeci nacin:

Sa intelovog sajta skinuo sam drajver i compieled binaries za MD5628D-L-B iako je moj bio MD5628D-L-A i kada sam vec gotove module ubacio proradio je.
Nisam morao da instalilram drugi kernel.
 
Odgovor na temu

[es] :: Linux mreže :: Problem sa modemom

[ Pregleda: 4508 | Odgovora: 6 ] > FB > Twit

Postavi temu Odgovori

Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.