[es] - Knoppix 3.3 i cable modem

pokusaj

Član broj: 319
Poruke: 55
168.143.113.*

Profil

^{07.05.2004. u 23:25 - pre 268 meseci}

Nabavio sam knoppix 3.3 i na moje odusevljenje kada sam ga pokrenuo sa cd-a, prepoznao mi je cable modem (nakacen na USB) kao eth0, posle konfiguracije sve je radilo kako treba.
Onda sam odlucio da obrisem suse 9.1 i instaliram knoppix na hard. Instalacija je protekla uspesno, medjutim, iako sam snimio podesavanja, i on ih je ucitao cable modem sad nece da radi.
Mislio sam da je do firewall-a, pa sam probao iptables -F, opet nista.

Probam opet da podignem sa cd-a, radi ...
Kucam dmesg (sa CD-a) i dobijem, izmedjuostalog,

Code:

CDCEther.c: CDCEther_open failed intr_urb -22
CDCEther.c: eth0: set multicast filters
CDCEther.c: eth0: too many MC filters for hardware, using allmulti
CDCEther.c: eth0: too many MC filters for hardware, using allmulti
CDCEther.c: eth0: too many MC filters for hardware, using allmulti
usb-uhci.c: interrupt, status 3, frame# 1031
CDCEther.c: rx status -84
CDCEther.c: BULK IN callback but driver is not active!
eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
CDCEther.c: CDCEther_open failed intr_urb -22
CDCEther.c: eth0: set multicast filters
CDCEther.c: eth0: too many MC filters for hardware, using allmulti
CDCEther.c: eth0: too many MC filters for hardware, using allmulti
CDCEther.c: eth0: too many MC filters for hardware, using allmulti
CDCEther.c: eth0: too many MC filters for hardware, using allmulti
usb-uhci.c: interrupt, status 2, frame# 76
CDCEther.c: rx status -84
CDCEther.c: eth0: RX status -84
CDCEther.c: rx status -84
CDCEther.c: eth0: RX status -84
CDCEther.c: rx status -84
CDCEther.c: eth0: RX status -84
CDCEther.c: rx status -84
CDCEther.c: eth0: RX status -84
CDCEther.c: rx status -84
CDCEther.c: eth0: RX status -84
CDCEther.c: rx status -84
CDCEther.c: eth0: RX status -84
usb.c: USB disconnect on device 00:07.2-1 address 2
hub.c: new USB device 00:07.2-1, assigned address 3
CDCEther.c: Ethernet information found at device configuration. Trying to use it anyway.
CDCEther.c: Found Header descriptor, CDC version 110.
CDCEther.c: Imperfect filtering support - need sw hashing
CDCEther.c: Can't use SetEthernetMulticastFilters request
CDCEther.c: detected BULK OUT packets of size 64
CDCEther.c: interrupt address: 5
CDCEther.c: interrupt interval: 64
CDCEther.c: eth0: Scientific-Atlanta USB Cable Modem 000A73F1A00D
CDCEther.c: eth0: 00:0A:73:F1:A0:0D
CDCEther.c: CDCEther_open failed intr_urb -22
CDCEther.c: eth0: set multicast filters
CDCEther.c: eth0: too many MC filters for hardware, using allmulti
CDCEther.c: eth0: too many MC filters for hardware, using allmulti
CDCEther.c: eth0: too many MC filters for hardware, using allmulti
usb-uhci.c: interrupt, status 3, frame# 1855
CDCEther.c: rx status -84
CDCEther.c: BULK IN callback but driver is not active!
CDCEther.c: write_bulk_callback: device not running
CDCEther.c: CDCEther_open failed intr_urb -22
CDCEther.c: eth0: set multicast filters
CDCEther.c: eth0: too many MC filters for hardware, using allmulti
CDCEther.c: eth0: too many MC filters for hardware, using allmulti
CDCEther.c: eth0: too many MC filters for hardware, using allmulti
CDCEther.c: eth0: too many MC filters for hardware, using allmulti
eth1: link up, 100Mbps, full-duplex, lpa 0x41E1

Iako je izbacio greske, modem radi.

Kada ga podignem sa harda dobijem nesto u fazonu

Code:

IP spoofing : rp_filter
CDCEther.c: CDCEther_open failed intr_urb -22
eth1: link up, 100Mbps, full-duplex, lpa 0x41E1

Mozda je do ovog IP spoofinga? Kada kucam ping google.com, ne napise da ne radi mreza, nego cuti...

Ajde pomozite da ne bih kupovao jos jednu mreznu ....

Odgovor na temu