[es] - Arch linux thread

dare023
Bečkerek

Član broj: 60701
Poruke: 363
*.adsl-a-8.sezampro.rs.

+2 Profil

^{21.10.2010. u 17:48 - pre 164 meseci}

Ma na desktopu mmi arch samo štrika :))).Definitivno je najbolji distro koji sam probao,kad se nešto podesi to je to,ima da radi ili da ga nema :P

@combuster: evo izlaz od sudo smartctl -a /dev/sda bez sudo nije htelo.

Code:
[darko@laptop ~]$ sudo smartctl -a /dev/sda
smartctl 5.39.1 2010-01-28 r3054 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi Travelstar 5K320 series
Device Model:     Hitachi HTS543225L9A300
Serial Number:    080918FB2D00LJG4852B
Firmware Version: FBEOC40C
User Capacity:    250,059,350,016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 3f
Local Time is:    Thu Oct 21 18:43:15 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:          ( 645) seconds.
Offline data collection
capabilities:              (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      ( 102) minutes.
SCT capabilities:            (0x003d)    SCT Status supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   062    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   163   163   033    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0012   099   099   000    Old_age   Always       -       2122
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       1082
10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       1181
191 G-Sense_Error_Rate      0x000a   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       24
193 Load_Cycle_Count        0x0012   092   092   000    Old_age   Always       -       84629
194 Temperature_Celsius     0x0002   220   220   000    Old_age   Always       -       25 (Lifetime Min/Max 12/51)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%       765         -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Ne vidim neki problem,pokušaću sa drive fitnes tool piše da podržava moj hd
Edit:Ne mogu da ga pokrenem...

_{[Ovu poruku je menjao dare023 dana 21.10.2010. u 19:07 GMT+1]}

dare023

Odgovor na temu

combuster
Ivan Bulatovic
Kraljevo

Član broj: 151351
Poruke: 4563
*.dynamic.isp.telekom.rs.

Sajt: www.linuxsrbija.org

+104 Profil

Re: Arch linux thread

^{24.10.2010. u 14:01 - pre 164 meseci}

Za one sa problemima sa compositing-om update-ovao sam xorg-server PKGBUILD u AUR-u na 1.9.1, ako ima nekih problema - javnite mi.

http://aur.archlinux.org/packages.php?ID=41438

@dare

Tebi taj dvd rezac pravi problem. Ranije je postojao bug gde pri jakom hd transferu ako hal poll-uje taj dvd rezac dolazi do velikog usporavanja sistema. Samo power cycle pomaze (vadjenje baterije na par minuta).

Code:

ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xe
ata2.00: irq_stat 0x40000001
ata2: SError: { PHYRdyChg }
sr 1:0:0:0: CDB: cdb[0]=0x0: 00 00 00 00 00 00
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY ERR }
ata2: hard resetting link
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete

U tom grmu lezi zec. Mozes da isprobas nekoliko varijanti:

1. Ako imas hal u DAEMONS sekciji ubij ga (ionako ti vise nije potreban)
2. Prebaci privremeno u BIOS-u kontroler iz AHCI u Legacy IDE mode
3. Probaj da flash-ujesh firmware tom dvd rezacu (ili probaj da update-ujes BIOS)

Da bi eventualno jos suzili problem, probaj da kopiras jedno 2GB tezak direktorijum sa particije na particiju (ili u okviru iste particije) i odmah ubaci neki DVD u taj rezac, mozda to trigger-uje taj bug.

Problem sa HD-om nije definitivno ali moguce je da DVD rezac posalje neko djubre kroz kontroler, pa cak i da je frka sa drajverom ili tako nesto to definitivno uzrokuje hardversku gresku koja je prisutna i po restartu sve dok se ne odradi power cycle.

Dakle moguci uzroci:

1. Defektan kablic
2. Defektan DVD rezac
3. Bug u libata modulu (bug u kernelu)
4. Problem sa napajanjem laptopa (baterija, punjac, elektronika)

Ako je bilo sta osim pod 3 onda mora da ti se dogadja i na Windowsu i drugim linux distribucijama.

make love - !war

Odgovor na temu