Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.

Point to Point link velike brzine

[es] :: Wireless :: Mikrotik :: Point to Point link velike brzine

Strane: < .. 1 2 3

[ Pregleda: 11422 | Odgovora: 46 ] > FB > Twit

Postavi temu Odgovori

Autor

Pretraga teme: Traži
Markiranje Štampanje RSS

djricky
IT & Network Engineer
AS200305
Beograd

SuperModerator
Član broj: 1046
Poruke: 4042
*.adsl.verat.net.

Sajt: https://v6.rs


+225 Profil

icon Re: Point to Point link velike brzine05.06.2008. u 19:49 - pre 192 meseci
cinjenica je da se sa TurboG moze postici znatno veca maksimalna brzina...
“Choose a job you like, and you will never have to work a day of your life”
“Looking at small advantages prevents great affairs from being accomplished”

"Great power comes with great electricity bills"
"The fact that there's a highway to Hell but only a stairway to Heaven says a lot about
anticipated traffic volume"
"Fate: protects fools, little children, and ships named NCC-1701"
 
Odgovor na temu

Hans_D
Dejan Pesic
Ivanel.net
Arandjelovac

Član broj: 44099
Poruke: 358
*.vozd.net.

Jabber: hans.lamele@gmail.com
ICQ: 206038758


+21 Profil

icon Re: Point to Point link velike brzine05.06.2008. u 22:09 - pre 192 meseci
Ali ne mora da znaci.Evo sad upravo podesavam 2 tplink kartice , na turboG prolazi manje protoka nego na B/G...
BUDIMO LJUDI IAKO SMO SRBI.
 
Odgovor na temu

Cyberghost
Aleksandar Jovanović
Programer
S U M A D I J A

Član broj: 14674
Poruke: 813
77.46.171.*



+1 Profil

icon Re: Point to Point link velike brzine06.06.2008. u 08:56 - pre 192 meseci
Imam jos samo jedno pitanje, a ti ce se bezbednosti na mrezi.

Router 1 je BRIDGE mod
Router 2 je STATION mod

da li ovo znaci da na Router 1 ne moze da se zakaci vise niko posto je Bridge a ne AP Bridge ?
Znam koliko je ranjiv Wireless i ostalo ali zelim da bez mnogo komplikacija napravim koliko toliko
bezbedan link. Da li da aktiviram access list-u pa da ubacim MAC od Stanice iako je to jadna zastita,
ili nesto drugo ?
Da li bi mi EoIP preko PPTP resio tih muka bezbednosti ili ne (posto PPTP jos nije podesen) ?

Pozdrav
Every program is either trivial or it contains at least one bug.
 
Odgovor na temu

Hans_D
Dejan Pesic
Ivanel.net
Arandjelovac

Član broj: 44099
Poruke: 358
*.vozd.net.

Jabber: hans.lamele@gmail.com
ICQ: 206038758


+21 Profil

icon Re: Point to Point link velike brzine06.06.2008. u 09:05 - pre 192 meseci
Ne znam sto opet pominjes bridge , rekli smo ti gore da stavis ap mod na jednom mt i station na drugom. Postavi eoip kako sam ti dao primer , jer ako neko hoce da ti upada u mrezu , od toga ces se tesko zastititi.
BUDIMO LJUDI IAKO SMO SRBI.
 
Odgovor na temu

acatheking
Aleksandar Ristić
Beograd/Mirijevo

Član broj: 6769
Poruke: 1133
*.absolutok.com.



+28 Profil

icon Re: Point to Point link velike brzine06.06.2008. u 09:31 - pre 192 meseci
Citat:

Router 1 je BRIDGE mod
Router 2 je STATION mod
da li ovo znaci da na Router 1 ne moze da se zakaci vise niko posto je Bridge a ne AP Bridge ?


Da. Ruter 1 ce dozvoliti da se na njega nakaci samo jedan klijent.
Mozes na wifi kartici na Ruter 1 da podesis default-authentication=no i da u access listu dodas samo MAC adresu wifi kartice sa Ruter 2.


Ne znam kakvo petljanje hoces sa PPTP i EoIP, nisam se upustao bas u takve poduhvate.
Ako hoces sigurnost, procitaj malo o IpSec.
Volim da se vozim grackim autobusom.
Gracki autobus jede sitne pare,
gracki autobus zna kad treba stane.
 
Odgovor na temu

djricky
IT & Network Engineer
AS200305
Beograd

SuperModerator
Član broj: 1046
Poruke: 4042
*.adsl.verat.net.

Sajt: https://v6.rs


+225 Profil

icon Re: Point to Point link velike brzine15.06.2008. u 11:11 - pre 192 meseci
Citat:
WDS Interface Configuration
Submenu level: /interface wireless wds
Description

WDS (Wireless Distribution System) allows packets to pass from one wireless AP (Access Point) to another, just as if the APs were ports on a wired Ethernet switch. APs must use the same standard (802.11a, 802.11b or 802.11g) and work on the same frequencies in order to connect to each other.

There are two possibilities to create a WDS interface:

* dynamic - is created 'on the fly' and appers under wds menu as a dynamic interface
* static - is created manually

Property Description
arp (disabled | enabled | proxy-arp | reply-only; default: enabled) - Address Resolution Protocol
disabled - the interface will not use ARP
enabled - the interface will use ARP
proxy-arp - the interface will use the ARP proxy feature
reply-only - the interface will only reply to the requests originated to its own IP addresses. Neighbour MAC addresses will be resolved using /ip arp statically set table only

disable-running-check (yes | no; default: no) - disable running check. For 'broken' wireless cards it is a good idea to set this value to 'yes'

mac-address (read-only: MAC address; default: 00:00:00:00:00:00) - MAC address of the master-interface. Specifying master-interface, this value will be set automatically

master-interface (name) - wireless interface which will be used by WDS

mtu (integer: 0..65336; default: 1500) - Maximum Transmission Unit

name (name; default: wdsN) - WDS interface name

wds-address (MAC address) - MAC address of the remote WDS host

Notes

When the link between WDS devices, using wds-mode=dynamic, goes down, the dynamic WDS interfaces disappear and if there are any IP addresses set on this interface, their 'interface' setting will change to (unknown). When the link comes up again, the 'interface' value will not change - it will remain as (unknown). That's why it is not recommended to add IP addresses to dynamic WDS interfaces.

If you want to use dynamic WDS in a bridge, set the wds-default-bridge value to desired bridge interface name. When the link will go down and then it comes up, the dynamic WDS interface will be put in the specified bridge automatically.

As the routers which are in WDS mode have to communicate at equal frequencies, it is not recommended to use WDS and DFS simultaneously - it is most probable that these routers will not connect to each other.

WDS significantly faster than EoIP (up to 10-20% on RouterBOARD 500 systems), so it is recommended to use WDS whenever possible.
Example


[admin@MikroTik] interface wireless wds> add master-interface=wlan1 \
\... wds-address=00:0B:6B:30:2B:27 disabled=no
[admin@MikroTik] interface wireless wds> print
Flags: X - disabled, R - running, D - dynamic
0 R name="wds1" mtu=1500 mac-address=00:0B:6B:30:2B:23 arp=enabled
disable-running-check=no master-inteface=wlan1
wds-address=00:0B:6B:30:2B:27

[admin@MikroTik] interface wireless wds>

“Choose a job you like, and you will never have to work a day of your life”
“Looking at small advantages prevents great affairs from being accomplished”

"Great power comes with great electricity bills"
"The fact that there's a highway to Hell but only a stairway to Heaven says a lot about
anticipated traffic volume"
"Fate: protects fools, little children, and ships named NCC-1701"
 
Odgovor na temu

djricky
IT & Network Engineer
AS200305
Beograd

SuperModerator
Član broj: 1046
Poruke: 4042
*.adsl.verat.net.

Sajt: https://v6.rs


+225 Profil

icon Re: Point to Point link velike brzine16.06.2008. u 18:01 - pre 192 meseci
a evo i linka gde je sve lepo objašnjeno... ;)

http://wiki.mikrotik.com/wiki/Transparently_Bridge_two_Networks
“Choose a job you like, and you will never have to work a day of your life”
“Looking at small advantages prevents great affairs from being accomplished”

"Great power comes with great electricity bills"
"The fact that there's a highway to Hell but only a stairway to Heaven says a lot about
anticipated traffic volume"
"Fate: protects fools, little children, and ships named NCC-1701"
 
Odgovor na temu

[es] :: Wireless :: Mikrotik :: Point to Point link velike brzine

Strane: < .. 1 2 3

[ Pregleda: 11422 | Odgovora: 46 ] > FB > Twit

Postavi temu Odgovori

Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.