Citao sam sve sto ste napisali,super je,al posto sam pocetnik u wirelessu,previse je informacija,pa mi djeluje dosta komplikovano.al hajd,treba od od neceg poceti...
Imam WL-5460AP v2,i prilikom prebacivanja iz client moda u WISP+universal repeater mod,izgleda da se zaledio.Lampice za LAN su zelene,ostale su crvene. Posto sam citao stranice redom,slijedio sam sljedecu proceduru:
1.Unplug the power of WL-5460AP.
2.Hold the reset button while plugging the power. Do not release the reset button until the "Status" LED goes off.
3.Set your PC's IP address to 192.168.1.199. Connect your PC to the WL-5460AP.
4.Open your web browser, then type "192.168.1.6". You should see the emergency code page where you can upload your AirLive firmware again.
Spojim se,E sad pise mi :“ We detected your system had been crashed.Please upload your Image file again!“
System upgrade ____________ Browse ;Upgrade
Skinuo sam WL-5460APv2-e8-firmware,i u “Readme” pise
-if the WL-5460AP users want to upgrade firmware from WL-5460AP-v2-eX(X stands for any number) firmware to third party.The user need to downgrade their firmware to WL-5460AP-3.2.1.3.9eu firmware(available on our download page) first before upgrading to third party firmware.
Znaci li to da prvo moram upgradovati WL-5460AP-3.2.1.3.9eu,ili mogu odmah WL-5460APv2-e8 sledeci proceduru?
Upgrade Procedure (upgrading from older non-WL-5460APv2 firmware):
1. Please update the firmware using "Intermediate-firmware.bin" file first.
Please do not power off or touch the web page until the upgrade is completed.
2. After upgrade is completed. Refresh your web browser.
3. Then update the firmware using "WL-5460AP-v2-e8-b1-firmware.bin"
Ili trebam slijediti Postupak povratka originalnog firmwarea za Ovislink 5460 koju je postavio apatinonline na stranici 1
http://www.elitesecurity.org/t164360-0#1126557
Prvi put radim ovo,pa ako moze neko samo da mi kaze jesam li na dobrom putu. Ako jesam da nastavim,a ako je komplicirano previse da ipak zovem majstora.
Veliki pozz svima!