[es] - kako da se konektujem na 042-...

crus
Bijelić Neven
Bg

Član broj: 15763
Poruke: 69
*.vdial.verat.net.

Sajt: www.transmute.co.yu

Profil

Re: kako da se konektujem na 042-...

^{19.02.2005. u 17:57}

Trenutno imam isti setup, i radi bez problema
SuSe 9.2 i Intel 537EP modem, skinuo generic linux drajvere sa sajta intela...
kernel version: 2.6.8-24.11-smp

p.s. ne znam koji alat koristis za konektovanje, ja koristim plain wvdial iz konzole
a evo kako izgleda moj etc/wvdial.conf file

Code:
[Dialer Defaults]
Modem = /dev/modem
Baud = 57600
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2
Init3 = ATX3
Area Code =
Phone = 042110011
Username = *****
Password = **** :))
Ask Password = 0
Dial Command = ATDT
Stupid Mode = 1
Compuserve = 0
Force Address =
Idle Seconds = 0
DialMessage1 =
DialMessage2 =
ISDN = 0
Auto DNS = 1

www.pixelparticles.com/blog/
www.pixelparticles.com
www.transmute.co.yu

^{19.02.2005. u 17:57}

mmssm

Član broj: 6817
Poruke: 39
*.ptt.yu.

Profil

Re: kako da se konektujem na 042-...

^{19.02.2005. u 19:06}

koristim Kinternet i ovo mi izbaci u Log-Kinternet

Status is: disconnected
Status is: connecting
pppd[0]: Plugin passwordfd.so loaded.
pppd[0]: --> WvDial: Internet dialer version 1.54.0
pppd[0]: --> Initializing modem.
pppd[0]: --> Sending: ATZ
pppd[0]: ATZ
pppd[0]: OK
pppd[0]: --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2
pppd[0]: ATQ0 V1 E1 S0=0 &C1 &D2
pppd[0]: OK
pppd[0]: --> Sending: ATX3
pppd[0]: ATX3
pppd[0]: OK
pppd[0]: --> Sending: ATM1
pppd[0]: ATM1
pppd[0]: OK
pppd[0]: --> Sending: ATX3
pppd[0]: ATX3
pppd[0]: OK
pppd[0]: --> Modem initialized.
pppd[0]: --> Sending: ATDT042110011
pppd[0]: --> Waiting for carrier.
pppd[0]: ATDT042110011
pppd[0]: CONNECT 14400
pppd[0]: --> Carrier detected. Waiting for prompt.
pppd[0]: CVX Access Switch.
pppd[0]: Access is restricted to authorized users only.
pppd[0]: login:
pppd[0]: --> Looks like a login prompt.
pppd[0]: --> Sending: mmssm
pppd[0]: mmssm
pppd[0]: password:
pppd[0]: --> Looks like a password prompt.
pppd[0]: --> Sending: (password)
pppd[0]: Valid commands are:
pppd[0]: quit Hang up and disconnect
pppd[0]: help List valid commands
pppd[0]: >
pppd[0]: --> Hmm... a prompt. Sending "ppp".
pppd[0]: ppp
pppd[0]: 'ppp' is not a valid command.
pppd[0]: Valid commands are:
pppd[0]: quit Hang up and disconnect
pppd[0]: help List valid commands
pppd[0]: >
pppd[0]: --> Hmm... a prompt. Sending "ppp".
pppd[0]: ppp
pppd[0]: 'ppp' is not a valid command.
pppd[0]: Valid commands are:
pppd[0]: quit Hang up and disconnect
pppd[0]: help List valid commands
pppd[0]: >
pppd[0]: --> Hmm... a prompt. Sending "ppp".
pppd[0]: --> Don't know what to do! Starting pppd and hoping for the best.
pppd[0]: Serial connection established.
pppd[0]: Renamed interface ppp0 to modem0
pppd[0]: Using interface modem0
Status is: connecting
pppd[0]: Connect: modem0 <--> /dev/modem
pppd[0]: Serial line is looped back.
pppd[0]: Connection terminated.
Status is: disconnecting
pppd[0]: Terminating on signal 15.
Status is: disconnecting
Status is: disconnected
pppd[0] died: Loopback detected (exit code 17)

Malo je dugacko ali stvarno ne znam sta da radim!

^{19.02.2005. u 19:06}

crus
Bijelić Neven
Bg

Član broj: 15763
Poruke: 69
*.vdial.verat.net.

Sajt: www.transmute.co.yu

Profil

Re: kako da se konektujem na 042-...

^{19.02.2005. u 20:00}

Hmpf.. Ne znam do čega bi to moglo biti..
Kinternet je koliko ja znam čisto frontend za wvdial..

Ali ajde probaj ovako..

uzmi kopiraj wvdial.conf iz etc foldera bilo gde recimo
tvojhomedir/temp
i edituj file, stavi stupidmode 1
kao što sam ja gore stavio u code.. naravno zameniš sa svojim user-passom...

pa lepo upališ terminal i uradiš
su
- ukucas pass -
pa ukucaj
wvdial --config /home/tvoj-user/temp/wvdial.conf

ako ti izbaci opet isto onda ne znam, navikni se da koristiš drugi broj za verat (3060606) ili potražiš na googletu mada čisto sumnjam da ćeš tamo naći nešto oproblemu koji te muči mada nikad ne znaš.

good luck!

www.pixelparticles.com/blog/
www.pixelparticles.com
www.transmute.co.yu

^{19.02.2005. u 20:00}