Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.

Wireless pppoe konekcija i mikrotik

[es] :: Wireless :: Mikrotik :: Wireless pppoe konekcija i mikrotik

[ Pregleda: 4542 | Odgovora: 3 ] > FB > Twit

Postavi temu Odgovori

Autor

Pretraga teme: Traži
Markiranje Štampanje RSS

digisatplus
Bgd

Član broj: 21309
Poruke: 345
*.227.nat-pool-bgd.sbb.co.yu.



Profil

icon Wireless pppoe konekcija i mikrotik02.12.2005. u 03:54 - pre 3164 dana i 1h

Prilicno sam se namucio da osposobim pomenutu kombinaciju i moram priznati da nisam uspeo. Radi se o sledecem, imam wireless konekciju kod provajdera koji se koristi pppoe logovanjem. Prosto receno da se sa mikrotika konektujem i logujem na provajdera a sa druge strane mikrotik da to podeli na preostale racunare.

Pitam da li je neko ovo uspeo da uradi i kako , ako moze neko upustvo. Unapred hvala i nadam se ako dodjemo do resenja da ce to jos nekome koristiti.


 
Odgovor na temu

whitie2004

Član broj: 19966
Poruke: 972
195.252.113.*



Profil

icon Re: Wireless pppoe konekcija i mikrotik02.12.2005. u 07:45 - pre 3163 dana i 22h
U interfejsima dodas novi interfejs tipa pppoe-out. Na prvoj ( general ) strani za MTU/MRU stavi 1480 i interfejs na postojeci wlan. Drugu stranicu ( dajl aut ) popuni u dogovoru sa provajderom, ali ostavi najki na ' add def. route' Ako je sve u redu sa pass i hardverom, mikrotik ce u dogovoru sa provajderom sam postaviti adrese i rute.

Ako radis SNAT u fajavolu, vezi mu aut.interfejs na taj novi pppoe-out, i to je to ...
Valjda ...
 
Odgovor na temu

broker

Član broj: 2415
Poruke: 8514
212.62.59.*



Profil

icon Re: Wireless pppoe konekcija i mikrotik02.12.2005. u 08:03 - pre 3163 dana i 21h
Laptopovi

Koji ti je AP klijent? Meni nije uspelo da naprvim konekciju sa Ovislinkom OWL-1120AP ali ni ovim novim OWL-5460AP. Probao sam na dva mesta gde je Mikrotik ruter i nije radilo ni na jednom. Ovislink inace rade PPPoE bez problema tamo gde nije Mikrotik u upotrebi.

Radi sa Geneko/Sparklan.
 
Odgovor na temu

Cynic
Čedomir Krsmanović
sys/net administrator
Beograd

Član broj: 3060
Poruke: 49
*.air.tehnicom.net.

Jabber: che@jabber.no
ICQ: 122748553


Profil

icon Re: Wireless pppoe konekcija i mikrotik03.12.2005. u 13:01 - pre 3162 dana i 16h
NIkada nisam podešavao MKT da bude pppoe klijent, ali sam ovo našao u uputstvu:



PPPoE Client Setup

Home menu level: /interface pppoe-client

Description

The PPPoE client supports high-speed connections. It is fully compatible with the MikroTik PPPoE server (access concentrator).

Note for Windows. Some connection instructions may use the form where the "phone number" us "MikroTik_AC\mt1" to indicate that "MikroTik_AC" is the access concentrator name and "mt1" is the service name.

Property Description

name (name; default: pppoe-out1) - name of the PPPoE interface
interface (name) - interface the PPPoE server can be connected through
mtu (integer; default: 1480) - Maximum Transmission Unit. The optimal value is the MTU of the interface the tunnel is working over decreased by 20 (so, for 1500-byte ethernet link, set the MTU to 1480 to avoid fragmentation of packets)
mru (integer; default: 1480) - Maximum Receive Unit. The optimal value is the MTU of the interface the tunnel is working over decreased by 20 (so, for 1500-byte ethernet link, set the MTU to 1480 to avoid fragmentation of packets)
user (text; default: "") - a user name that is present on the PPPoE server
password (text; default: "") - a user password used to connect the PPPoE server
profile (name) - default profile for the connection
allow (multiple choice: mschap2, mschap1, chap, pap; default: mschap2, mschap1, chap, pap) - the protocol to allow the client to use for authentication
service-name (text; default: "") - specifies the service name set on the access concentrator. Leave it blank unless you have many services and need to specify the one you need to connect to
ac-name (text; default: "") - this may be left blank and the client will connect to any access concentrator that offers the "service" name selected
add-default-route (yes | no; default: no) - whether to add a default route automatically
dial-on-demand (yes | no; default: no) - connects to AC only when outbound traffic is generated and disconnects when there is no traffic for the period set in the idle-timeout value
use-peer-dns (yes | no; default: no) - whether to set the router's default DNS to the PPP peer DNS (i.e. whether to get DNS settings from the peer)

Notes
If there is a default route, add-default-route will not create a new one.

Example

To add and enable PPPoE client on the gig interface connecting to the AC that provides testSN service using user name john with the password password:

[admin@RemoteOffice] interface pppoe-client> add interface=gig \
\... service-name=testSN user=john password=password disabled=no
[admin@RemoteOffice] interface pppoe-client> print
Flags: X - disabled, R - running
0 R name="pppoe-out1" mtu=1480 mru=1480 interface=gig user="john"
password="password" profile=default service-name="testSN" ac-name=""
add-default-route=no dial-on-demand=no use-peer-dns=no

Monitoring PPPoE Client

Command name: /interface pppoe-client monitor

Property Description

status (text) - status of the client
• Dialing - attempting to make a connection
• Verifying password... - connection has been established to the server, password verification in progress
• Connected - self-explanatory
• Terminated - interface is not enabled or the other side will not establish a connection uptime (time) - connection time displayed in days, hours, minutes and seconds
encoding (text) - encryption and encoding (if asymmetric, separated with '/') being used in this connection
uptime (time) - connection time displayed in days, hours, minutes and seconds
service-name (text) - name of the service the client is connected to
ac-name (text) - name of the AC the client is connected to
ac-mac (MAC address) - MAC address of the access concentrator (AC) the client is connected to

Example

To monitor the pppoe-out1 connection:

[admin@MikroTik] interface pppoe-client> monitor pppoe-out1
status: "connected"
uptime: 10s
encoding: "none"
service-name: "testSN"
ac-name: "10.0.0.1"
ac-mac: 00:C0:DF:07:5E:E6
[admin@MikroTik] interface pppoe-client>
make install, not war
 
Odgovor na temu

[es] :: Wireless :: Mikrotik :: Wireless pppoe konekcija i mikrotik

[ Pregleda: 4542 | Odgovora: 3 ] > FB > Twit

Postavi temu Odgovori

Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.