BrzanaC Nikolic Nebojsa Austrija
Član broj: 60914 Poruke: 12 *.sphinx.at.
|
Pozdrav...
...elem installirao sam Fedoru Core 4, vrlo mrsavo, bez ikakve graficke okoline jer nije mi sve potrebno sto ide u instalacijonu opciju 'X System Software' (gomila stvari koje necu koristiti.).
Instaliranjem paketa xorg-x11 nije sve ucinjeno, mada sam sve to installirao sa YUM-om (packet manager) koji sa i pobrinuo i za resavnje zavisnih paketa, koje je iste i instalirao.
Ipak, startx krene, vidim na kratko plavu pozadinu i krstix misa, ali to je sve.
Server prekine i opet se nalazim na command promptu ...
Da napomenen da koristim Windowmaker.
Uspu jos /etc/X11/ /etc/X11/xorg.conf. Log fajl nejavlja greske
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
# InputDevice "Synaptics" "AlwaysCore"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
# FontPath "unix/:7100"
FontPath "/usr/X11R&/lib/X11/fonts/misc/"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
# Load "synaptics"
EndSection
Section "Files"
#FontPath "/usr/X11R6/lib/X11/fonts"
#FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
#FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
#FontPath "/usr/X11R6/lib/X11/fonts/TTF"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
#FontPath "/usr/X11R6/lib/X11/fonts/local"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
#Section "InputDevice"
# Identifier "Synaptics"
# Driver "synaptics"
# Option "Device" "/dev/input/mice"
# Option "Protocol" "auto-dev"
# Option "Emulate3Buttons" "yes"
#EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Unknown monitor"
HorizSync 31.5 - 37.9
VertRefresh 50.0 - 70.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
VendorName "Videocard vendor"
BoardName "ATI Radeon Mobility M9"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Viewport 0 0
Depth 16
# Modes "800x600" "640x480"
Modes "1280x1024" "1240x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
Pozdrav i hvala
|