[es] - PC i NOKIA - pocetnik ;)

Srđan Pavlović
Specijalna Edukacija i Rehabilitacija MNRO
Vojvodina, Bačka Palanka

Član broj: 139340
Poruke: 5571
212.200.30.*

Sajt: www.oligofrenolog.com

+382 Profil

Re: PC i NOKIA - pocetnik ;)

^{11.02.2009. u 11:00 - pre 184 meseci}

raspakuj tu tar arhivu i vidi sta se nalazi u njoj. Ako mozes skini negde bas .deb fajl wvdial-a,
pa ga instaliraj sa:

sudo dpkg -i wvdial_1.56-1.2_i386.deb (recimo da se tako zove, ako imas 64-bit sistem onda ce biti x_64. deb na kraju)

Lakse ti je tako, nego da sam kompajliras ako je u toj tar arhivi source za wvdial, a verovatno jeste, kad vec
postoji gotov .deb paket (Ubuntu koristi .deb pakete za instalaciju jer je zasnovan na Debian Linuxu)

Ako budes instalirao iz sourcea, onda raspakuj tu arhivu i procitaj prvo README fajl i prati uputstva.
Uglavnom se svodi na kucanje komandi

# make
# make install

(u direktorijumu gde je raspakovana arhiva)

ali moze biti da je potrebno jos sta konfigurisati, treba da pise sve u README fajlu.

Paketi za Interpid:

http://packages.ubuntu.com/intrepid/wvdial

_{[Ovu poruku je menjao Kernel-1 dana 11.02.2009. u 12:13 GMT+1]}

oligofrenolog

Odgovor na temu

vidonk
Slobodan Vidovic
Niksic

Član broj: 192156
Poruke: 355
212.200.246.*

+9 Profil

Re: PC i NOKIA - pocetnik ;)

^{11.02.2009. u 13:35 - pre 184 meseci}

Nadam se da te nesamram ovim glupostima :D ali imam jedan problem hm ovako ...
Skinuo sam wvdial_1.60.1_i386.deb i instalirao ga uspjesno, ukucao sam u konzolu sudo wvdialconf i ispisano mi je nes kao....

Code:

slobodan@PowerPC:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2   S3
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM0<*1>: Modem Identifier: ATI -- Nokia
ttyACM0<*1>: Speed 4800: AT -- OK
ttyACM0<*1>: Speed 9600: AT -- OK
ttyACM0<*1>: Speed 19200: AT -- OK
ttyACM0<*1>: Speed 38400: AT -- OK
ttyACM0<*1>: Speed 57600: AT -- OK
ttyACM0<*1>: Speed 115200: AT -- OK
ttyACM0<*1>: Speed 230400: AT -- OK
ttyACM0<*1>: Speed 460800: AT -- OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found an USB modem on /dev/ttyACM0.
Modem configuration written to /etc/wvdial.conf.
ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

i sad bihtrebao da uradim nes ovako

3) edit the configuration file at /etc/wvdial.conf by typing "sudo gedit /etc/wvdial.conf"

4) make sure u DON change ANYTHING except adding the following:-

Init3 = AT+CGDCONT=1, "IP","type ur service provider name in here"<--normally it can be found at ur phone-> setting-> connection-> access points. this is n73.

phone = *99# <--this shud be like this.

remember to save the file

5)type "sudo wvdial"
6)connection done.

i ja nadjem /etc/wvdial.conf i otvorim ga pomocu Kate i unesem parametre ali nemogu to da sacuvam kaze mi ovako
"The document could not be saved, as it was not possible to write to /etc/wvdial.conf."
"check that you have write acces to this file or that enought disk space is avalible. "

Gledao sam na propertis -> permissions -> advanced i user je strikiran pod Write ..... ne razumijem zasto nemogu onda sa posle editovanja nemogu da sacuvam fajl ?

Signaure Hamer Dev .inc

Odgovor na temu