LIRC i ubuntu lucid
03.08.2010. u 15:39 · pre 197 meseci
#1
Pozdrav. Jel se cimao ko oko LIRC-a? Nedavno sam pazario HP Pavilion dv6 notebook i dobio daljinac uz njega koji radi u Windowsu bez problema. Instalirao sam lirc ali ne dobijam nikakve ir kodove od daljinca. Koliko znam, kad upalim "irw" i onda pritiskam dugmad na daljincu trebalo bi da vidim output na terminalu, međutim nema ništa. Jedino što mogu da vidim je kad upalim "xev" da kad pritisnem dugme Display vidim kako kursor blinkne i xev mi pokaže:
Ima li ko ideju kako ovo da napravim? Našao sam lircd.conf za moj daljinac (http://lirc.sourceforge.net/remotes/hp/RC1762308-01B) ali to mi ništa ne pomaže. Čak sam pokrenuo "irrecord" i snimio kodove od nule i dobio isti fajl kao što sam skinuo, koji ne radi naravno. Pokušao sam da snimim Raw kodove ali to je nemoguće jer dobijem sledeće:
itd..
FYI, koristim 2.6.34-020634-generic kernel i lircd 0.8.6. Lirc moduli su naravno učitani i lirc daemon radi.
help pliz :)
Expose event, serial 41, synthetic NO, window 0x9a00001,
(0,0), width 178, height 10, count 3
Expose event, serial 41, synthetic NO, window 0x9a00001,
(0,10), width 10, height 58, count 2
Expose event, serial 41, synthetic NO, window 0x9a00001,
(68,10), width 110, height 58, count 1
Expose event, serial 41, synthetic NO, window 0x9a00001,
(0,68), width 178, height 110, count 0
Expose event, serial 41, synthetic NO, window 0x9a00001,
(0,0), width 178, height 10, count 3
Expose event, serial 41, synthetic NO, window 0x9a00001,
(0,10), width 10, height 58, count 2
Expose event, serial 41, synthetic NO, window 0x9a00001,
(68,10), width 110, height 58, count 1
Expose event, serial 41, synthetic NO, window 0x9a00001,
(0,68), width 178, height 110, count 0
FocusOut event, serial 41, synthetic NO, window 0x9a00001,
mode NotifyNormal, detail NotifyNonlinear
(0,0), width 178, height 10, count 3
Expose event, serial 41, synthetic NO, window 0x9a00001,
(0,10), width 10, height 58, count 2
Expose event, serial 41, synthetic NO, window 0x9a00001,
(68,10), width 110, height 58, count 1
Expose event, serial 41, synthetic NO, window 0x9a00001,
(0,68), width 178, height 110, count 0
Expose event, serial 41, synthetic NO, window 0x9a00001,
(0,0), width 178, height 10, count 3
Expose event, serial 41, synthetic NO, window 0x9a00001,
(0,10), width 10, height 58, count 2
Expose event, serial 41, synthetic NO, window 0x9a00001,
(68,10), width 110, height 58, count 1
Expose event, serial 41, synthetic NO, window 0x9a00001,
(0,68), width 178, height 110, count 0
FocusOut event, serial 41, synthetic NO, window 0x9a00001,
mode NotifyNormal, detail NotifyNonlinear
Ima li ko ideju kako ovo da napravim? Našao sam lircd.conf za moj daljinac (http://lirc.sourceforge.net/remotes/hp/RC1762308-01B) ali to mi ništa ne pomaže. Čak sam pokrenuo "irrecord" i snimio kodove od nule i dobio isti fajl kao što sam skinuo, koji ne radi naravno. Pokušao sam da snimim Raw kodove ali to je nemoguće jer dobijem sledeće:
Now hold down button "KEY_POWER".
Got it.
Signal length is 68
That's weird because the signal length must be odd!
Try again.
Got it.
Signal length is 68
That's weird because the signal length must be odd!
Try again.
Got it.
Signal length is 62
That's weird because the signal length must be odd!
Try again.
Got it.
Signal length is 2
That's weird because the signal length must be odd!
Try again.
Got it.
Signal length is 68
That's weird because the signal length must be odd!
Try again.
Got it.
Signal length is 68
That's weird because the signal length must be odd!
Try again.
Got it.
Signal length is 62
That's weird because the signal length must be odd!
Try again.
Got it.
Signal length is 2
That's weird because the signal length must be odd!
Try again.
itd..
FYI, koristim 2.6.34-020634-generic kernel i lircd 0.8.6. Lirc moduli su naravno učitani i lirc daemon radi.
goran@shiva:~$ dmesg | grep lirc
[ 6.063224] lirc_dev: IR Remote Control driver registered, major 61
[ 6.489003] lirc_dev: lirc_register_driver: sample_rate: 0
[ 14.304087] lirc_serial: auto-detected active low receiver
[ 14.304095] lirc_dev: lirc_register_driver: sample_rate: 0
[ 14.304204] lirc_serial $Revision: 5.104 $ registered
goran@shiva:~$ lsmod | grep lirc
lirc_serial 9923 0
lirc_ene0100 6479 0
lirc_dev 9022 2 lirc_serial,lirc_ene0100
goran@shiva:~$ ps -ef | grep lirc
root 1147 1 0 16:21 ? 00:00:00 /usr/sbin/lircd --output=/var/run/lirc/lircd --driver=default
goran 2402 2205 0 16:38 pts/0 00:00:00 grep --color=auto lirc
[ 6.063224] lirc_dev: IR Remote Control driver registered, major 61
[ 6.489003] lirc_dev: lirc_register_driver: sample_rate: 0
[ 14.304087] lirc_serial: auto-detected active low receiver
[ 14.304095] lirc_dev: lirc_register_driver: sample_rate: 0
[ 14.304204] lirc_serial $Revision: 5.104 $ registered
goran@shiva:~$ lsmod | grep lirc
lirc_serial 9923 0
lirc_ene0100 6479 0
lirc_dev 9022 2 lirc_serial,lirc_ene0100
goran@shiva:~$ ps -ef | grep lirc
root 1147 1 0 16:21 ? 00:00:00 /usr/sbin/lircd --output=/var/run/lirc/lircd --driver=default
goran 2402 2205 0 16:38 pts/0 00:00:00 grep --color=auto lirc
help pliz :)
Potpis
:(){ :|:& };:
ॐ Peace, Love, Unity, Respect! ॐ
ॐ Peace, Love, Unity, Respect! ॐ