kopiranje kanala moze kod gamme dci i sa risivera na risiver
ustvari mozes i ceo soft ili boot da kopiras probaj sa dcip
kad ih vec imas vise komada :
Prepare the two receivers. One is the source, the other is the target.
Set the source receiver in send mode as follows
Turn on the power of the source receiver and press the buttons on the front panel or the remote control in the following order: MENU, CH-UP, VOL-UP, CH-DOWN, VOL-DOWN, MENU
The text CPPG (Copy Program) will appear on the front LED display
If you wish to copy the firmware and the TV channels, then skip this bullet. If you wish to copy just the TV channels then press CH-UP or CH-Down, the LED will display CPCH (Copy Channels).
Press the OK button. The LED will display SEND
Connect the source and target receivers with an RS232 null modem cable.
Turn on the power of the target receiver.
The copy function will proceed automatically. STRT will be displayed on the front LED of the source receiver, and a percentage will be displayed on the target receiver.
When transfer is completed, the message GOOD or FAIL will appear on the front LED of the source receiver, and UPDA will be displayed on the LED of the target receiver. The target receiver will reboot.
If you want to make a copy to another receiver, just proceed from step 6 through 9. No need to press any buttons on the source receiver.
a stavio sam soft multimedije na upload,mislim da je mozda i
zadnji koji radi dobro mada nije najnoviji ali drcko neka proba da mu
proradi normalno njegov ako moze
Dejan Vip mobile 061 1697440