ako je sasija FE2
Reverts to st/by at sw on with 2 or 5 flashes from LED
5 flashes indicates an AKB error (Grey Scale Correction).
This is normally due to LOP shut down & there is no EHT
or sec line volts. Normally due to faulty R618 (270K ohm).
This res is in the current sensing cct & could therefore
potentially give you an over-current error (2 flashes).
LED flashes 5 times - sound but no pic aft initial EHT rush
R618 270k in current sensing cct - roughly centre of board close to Q602