|
skysrb
borac za istinu
nezaposlen
pozarevac
Član broj: 245058
Poruke: 57
*.evizo.net.
|
Koliko sam uspeo da vidim vidi ga negde tamo pod brojem 14. al moguce da mi treba neki program da sve to pokrenem
linux-vokd:/home/skysrb # hwinfo --usb
04: SCSI 400.0: 10600 Disk
[Created at block.245]
Unique ID: 2UT6.Re7diEelaY2
SysFS ID: /class/block/sdb
SysFS BusID: 4:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:10.4/usb1/1-3/1-3:1.0/host4/target4:0:0/4:0:0:0
Hardware Class: disk
Model: "USB FLASH DRIVE"
Vendor: usb 0x1005
Device: usb 0xb113 "USB FLASH DRIVE"
Revision: "PMAP"
Serial ID: "199C178648550568"
Driver: "usb-storage", "sd"
Driver Modules: "usb_storage"
Device File: /dev/sdb (/dev/sg3)
Device Files: /dev/sdb, /dev/block/8:16, /dev/disk/by-id/usb-_USB_FLASH_DRIVE_199C178648550568-0:0, /dev/disk/by-path/pci-0000:00:10.4-usb-0:3:1.0-scsi-0:0:0:0
Device Number: block 8:16-8:31 (char 21:3)
Geometry (Logical): CHS 1018/124/62
Size: 7827456 sectors a 512 bytes
Speed: 480 Mbps
Module Alias: "usb:v1005pB113d0100dc00dsc00dp00ic08isc06ip50"
Driver Info #0:
Driver Status: usb_storage is active
Driver Activation Cmd: "modprobe usb_storage"
Config Status: cfg=no, avail=yes, need=no, active=unknown
05: SCSI 500.0: 10600 Disk
[Created at block.256]
Unique ID: zFuK.tEwsfsN5uV5
SysFS ID: /class/block/sdc
SysFS BusID: 5:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:10.4/usb1/1-8/1-8:1.0/host5/target5:0:0/5:0:0:0
Hardware Class: disk
Model: "Generic Multi-Card"
Vendor: usb 0x0bda "Generic-"
Device: usb 0x0158 "Multi-Card"
Revision: "1.00"
Serial ID: "20060413092100000"
Driver: "usb-storage", "sd"
Driver Modules: "usb_storage"
Device File: /dev/sdc (/dev/sg4)
Device Files: /dev/sdc, /dev/block/8:32, /dev/disk/by-id/usb-Generic-_Multi-Card_20060413092100000-0:0, /dev/disk/by-path/pci-0000:00:10.4-usb-0:8:1.0-scsi-0:0:0:0
Device Number: block 8:32-8:47 (char 21:4)
Geometry (Logical): CHS 1024/0/62
Speed: 480 Mbps
Module Alias: "usb:v0BDAp0158d5195dc00dsc00dp00ic08isc06ip50"
Driver Info #0:
Driver Status: usb_storage is active
Driver Activation Cmd: "modprobe usb_storage"
Drive status: no medium
Config Status: cfg=no, avail=yes, need=no, active=unknown
06: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: k4bc.22MfGOBVe10
SysFS ID: /devices/pci0000:00/0000:00:10.4/usb1/1-0:1.0
SysFS BusID: 1-0:1.0
Hardware Class: hub
Model: "Linux 2.6.34-12-default ehci_hcd EHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.34-12-default ehci_hcd"
Device: usb 0x0002 "EHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:10.4"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: option is not active
Driver Activation Cmd: "modprobe option"
Driver Info #1:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=no, avail=yes, need=no, active=unknown
07: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: pBe4.5nw7MPEyvh9
SysFS ID: /devices/pci0000:00/0000:00:10.0/usb2/2-0:1.0
SysFS BusID: 2-0:1.0
Hardware Class: hub
Model: "Linux 2.6.34-12-default uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.34-12-default uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:10.0"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=no, avail=yes, need=no, active=unknown
08: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: uIhY.sV+ij91gsz0
SysFS ID: /devices/pci0000:00/0000:00:10.1/usb3/3-0:1.0
SysFS BusID: 3-0:1.0
Hardware Class: hub
Model: "Linux 2.6.34-12-default uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.34-12-default uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:10.1"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=no, avail=yes, need=no, active=unknown
09: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: zPk0.dE4I5wpNpF8
SysFS ID: /devices/pci0000:00/0000:00:10.2/usb4/4-0:1.0
SysFS BusID: 4-0:1.0
Hardware Class: hub
Model: "Linux 2.6.34-12-default uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.34-12-default uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:10.2"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=no, avail=yes, need=no, active=unknown
10: USB 00.0: 10a00 Hub
[Created at usb.122]
Unique ID: 2XnU.Oz8tSgc5mXF
SysFS ID: /devices/pci0000:00/0000:00:10.3/usb5/5-0:1.0
SysFS BusID: 5-0:1.0
Hardware Class: hub
Model: "Linux 2.6.34-12-default uhci_hcd UHCI Host Controller"
Hotplug: USB
Vendor: usb 0x1d6b "Linux 2.6.34-12-default uhci_hcd"
Device: usb 0x0001 "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:10.3"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=no, avail=yes, need=no, active=unknown
11: USB 00.0: 11200 TV Card
[Created at usb.122]
Unique ID: cLrx.qT9ZbnoHk40
Parent ID: k4bc.22MfGOBVe10
SysFS ID: /devices/pci0000:00/0000:00:10.4/usb1/1-2/1-2:1.0
SysFS BusID: 1-2:1.0
Hardware Class: tv card
Model: "Microdia USB20 Camera"
Hotplug: USB
Vendor: usb 0x0c45 "Microdia"
Device: usb 0x6270 "USB20 Camera"
Revision: "1.00"
Driver: "sn9c20x"
Driver Modules: "gspca_sn9c20x"
Speed: 480 Mbps
Module Alias: "usb:v0C45p6270d0100dc00dsc00dp00icFFiscFFipFF"
Driver Info #0:
Driver Status: gspca_sn9c20x is active
Driver Activation Cmd: "modprobe gspca_sn9c20x"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #6 (Hub)
14: USB 00.0: 0000 Unclassified device
[Created at usb.122]
Unique ID: Uc5H.e_v4CL5aIfD
Parent ID: k4bc.22MfGOBVe10
SysFS ID: /devices/pci0000:00/0000:00:10.4/usb1/1-4/1-4:1.0
SysFS BusID: 1-4:1.0
Hardware Class: unknown
Model: "Ralink 802.11 n WLAN"
Hotplug: USB
Vendor: usb 0x148f "Ralink Technology, Corp."
Device: usb 0x3070 "802.11 n WLAN"
Revision: "1.01"
Serial ID: "1.0"
Driver: "rt2870"
Driver Modules: "rt2870sta"
Speed: 480 Mbps
Module Alias: "usb:v148Fp3070d0101dc00dsc00dp00icFFiscFFipFF"
Driver Info #0:
Driver Status: rt2870sta is active
Driver Activation Cmd: "modprobe rt2870sta"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #6 (Hub)
|
planet wnl u 554 wireles usb
