Sve sam blizi odluci da kupim sebi Uni-t UT61C
Maksimalna cifra koju mogu da priustim a koliko sam shvatio ovaj model C je najbolji od Modela A,B,E,D.
Evo specifikacije
UNI-T UT61C
SPECIFICATION:
DC Voltage Measurement:
60mV / 600mV +/- (0.8%+3)
6V / 60V / 600V +/ -(0.5%+1)
1000V +/- (1.0%+3)
AC Voltage Measurement:
45Hz ~ 1kHz
60mV / 600mV +/- (1.2%+5)
6V / 60V / 600V +/- (1.0%+3)
750V +/- (1.2%+5)
DC Current Measurement:
600µA / 6000µA +/- (1.0%+3)
60mA / 600mA +/- (1.0%+3)
6A / 10A +/- (1.2%+5)
AC Current Measurement:
45Hz ~ 1kHz
600µA / 6000µA +/- (1.2%+5)
60mA / 600mA +/- (1.5%+5)
6A / 10A +/- (2.0%+5)
Resistance Measurement:
600 Ohm +/- (1.2%+2)
6 kOhm / 60 kOhm / 600 kOhm +/- (1.0%+2)
6 MOhm +/- (1.2%+2)
60 MOhm +/- (1.5%+2)
Capacitance Measurement:
40nF +/- (3.0%+5)
400nF / 4µF / 40µF +/- (3.0%+5)
400µF +/- (4.0%+5)
4000µF: only reference
Temperature Measurement °C:
-40°C ~ -20°C - (8.0%+5)
> -20°C ~ 0°C +/- (1.2%+4)
> 0°C ~ 100°C +/- (1.2%+3)
> 100°C ~ 1000°C +/- (2.5%+2)
Temperature Measurement °F:
-40°F ~ 4°F - (8.0%+6)
> 4°F ~ 32°F +/- (1.2%+5)
> 32°F ~ 212°F +/- (1.2%+4)
> 212°F ~ 1832°F +/- (2.5%+3)
Frequency: 10Hz ~ 10MHz +/- (0.1%+4)
Duty Cycle: 0.1% ~ 99.9%
SPECIAL FUNCTIONS:
Manual Ranging
Diode
Continuity Buzzer
Data Hold
Max/Min Mode
Display Backlight
REL
Sleep Mode
RS232(USB)
Fuse
Input Impedance for DC Voltage Measurement Around 10 MOhm
Low Battery Display < 7.5V
Mislim da je ovo za moje amaterske popravke sasvim dovoljno i da cu biti zadovoljan.
Da proverim grejac na bojleru,rinlu,kondenz. masine prekid kabla
....
Danas sam zvao 10 radnji ali nigde da pronadjem ko je uvoznik i gde i ima u prodaji.
Pronasao sam po neki model ali ovaj ne.
Ako moze pomoc gde da kupim bicu jako zahvalan.
Mastech MS209 ili UNI-T ut61
Re: Mastech MS209 ili UNI-T ut61