Srodne teme
Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.

Samba, Rumba i ostale okretne igre

[es] :: Linux mreže :: Samba, Rumba i ostale okretne igre

[ Pregleda: 4689 | Odgovora: 7 ] > FB > Twit

Postavi temu Odgovori

Autor

Pretraga teme: Traži
Markiranje Štampanje RSS

Dejan Lozanovic
Dejan Lozanovic
Beograd

Član broj: 691
Poruke: 2325
*.verat.net

Jabber: null@elitesecurity.org
Sajt: speedy-order.com


+75 Profil

icon Samba, Rumba i ostale okretne igre28.09.2001. u 13:29 - pre 273 meseci
Po ko zna koji put se ova tema vrti po forumu ali ja vec evo 7 dana citam dokumentaciju HOW-TO, man i HTML izdanje knjige Using Samba. I ne uspeva mi da resim problem do kraja. Naime podesio ja kao sve to lepo, medjutim ne mogu nikako da vidim sta je sve stavljeno na sherovanje kada uradim
# smbclient -L localhost
Password:
tree connect failed: ERRSRV - ERRinvnetname
dobijem gresku a iz wina kada ukucam \dejan dobijem gresku tipa
\dejan is not accessible
Cannot enumerate a non-container
I na find comupters ga ne vidi kao deo grupe xxx
a find comuters ga nadje medjutim stavi ikonicu kao za RTF dokument :)

dok nbtstat lepo vidi stvar

C:> nbtstat -a dejan
NetBIOS Remote Machine Name Table

Name Type Status
---------------------------------------------
DEJAN <00> UNIQUE Registered
DEJAN <03> UNIQUE Registered
DEJAN <20> UNIQUE Registered
..__MSBROWSE__.<01> GROUP Registered
XXX <00> GROUP Registered
XXX <1D> UNIQUE Registered
XXX <1E> GROUP Registered

A da napomenem posto sam postavio iste sherove kao iz win-a, sa drugog kompjutera se on lepo konektuje na to i pristipa svemu tome bez muke, cak mogu i da stampam :))) bez problema ali da vidim sta je sve tamo, huh jebeno je to namestiti.

Evo i sam smb.conf fajl pa ljudi pomagajte

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not many any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = xxx

# server string is the equivalent of the NT Description field
server string = Malisa

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
hosts allow = 192.168.0.2 127.

# Enabling internationalization:
# you can match a Windows code page with a UNIX character set.
# Windows: 437 (US), 737 (GREEK), 850 (Latin1 - Western European),
# 852 (Eastern Eu.), 861 (Icelandic), 932 (Cyrillic - Russian),
# 936 (Japanese - Shift-JIS), 936 (Simpl. Chinese), 949 (Korean Hangul),
# 950 (Trad. Chin.).
# UNIX: ISO8859-1 (Western European), ISO8859-2 (Eastern Eu.),
# ISO8859-5 (Russian Cyrillic), KOI8-R (Alt-Russ. Cyril.)
# This is an example for french users:
; client code page = 850
; character set = ISO8859-1


# CHANGES TO ENABLE PRINTING ON ALL CUPS PRINTERS IN THE NETWORK
# (as cups is now used in linux-mandrake 7.2 by default)
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
printcap name = lpstat
load printers = yes

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx, cups
printing = cups


# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
max log size = 50

# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = share
# Use password server option only with security = server
; password server = <NT-Server-Name>

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
encrypt passwords = yes
; smb passwd file = /etc/smbpasswd

# The following are needed to allow password changing from Windows to
# update the Linux sytsem password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
; unix password sync = Yes
; passwd program = /usr/bin/passwd %u
; passwd chat = *New*UNIX*password* %nn *ReType*new*UNIX*password* %nn *passwd:*all*authentication*tokens*updated*successfully*

# Unix users can map to different SMB User names
; username map = /etc/smbusers

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY
# SO_RCVBUF=8192 SO_SNDBUF=8192

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
interfaces = eth0

# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
null passwords = yes
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
preferred master = yes

# Use only if you have an NT server on your network that has been
# configured at install time to be a primary domain controller.
; domain controller = <NT-Domain-Controller-SMBName>

# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \%LProfiles%U

# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no
unix password sync = yes
map to guest = never
password level = 0
domain master = no
wins support = no
dead time = 0
debug level = 0
domain logons = no

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no

#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
writable = yes

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /home/netlogon
; guest ok = yes
; writable = no
; share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
[hardc]
path = /mnt/hardc
browseable = yes
public = yes
available = yes
guest only = no
writable = yes
only user = no

[cd-rom]
path = /mnt/cdrom
browseable = yes
public = yes
writable = no
available = yes
guest only = no
only user = no

# NOTE: If you have a CUPS print system there is no need to
# specifically define each individual printer.
# You must configure the samba printers with the appropriate Windows
# drivers on your Windows clients. On the Samba server no filtering is
# done. If you wish that the server provides the driver and the clients
# send PostScript ("Generic PostScript Printer" under Windows), you have
# to swap the 'print command' line below with the commented one.
[printers]
comment = All Printers
path = /var/spool/samba
browseable = yes
# to allow user 'guest account' to print.
public = yes
writable = no
printable = yes
create mode = 0700
# =====================================
# print command: see above for details.
# =====================================
print command = lpr-cups -P %p -o raw %s -r # using client side printer drivers.
; print command = lpr-cups -P %p %s # using cups own drivers (use generic PostScript on clients).
lpq command = lpstat -o %p
lprm command = cancel %p-%j
available = yes
[netlogon]
available = yes
 
Odgovor na temu

m r v a

Član broj: 8
Poruke: 1843
*.yubc.net



Profil

icon Re: Samba, Rumba i ostale okretne igre28.09.2001. u 14:08 - pre 273 meseci
Zasto komplikovano kad moze jednostavno .....

prvo, nisi morao da postujes ceo smb.conf i to pun komentara ....

iskreno mislim da grm cuci u TCP_NODELAY ....
mada nista to ne znaci ...

ako nesto pomogne evo i mog smb.conf
Code:

root@marge:~# cat /usr/local/samba/lib/smb.conf
# Samba config file created using SWAT
# from homer.simpsons.net.yu (192.168.0.1)
# Date: 2001/05/13 17:42:27

# Global parameters
[global]
        workgroup = SIMPSONS
        server string = Samba Server on Slakware Linux 7.1
        security = SHARE
        password level = 1
        username level = 1
        max log size = 50
        load printers = No

[temp]
        comment = Temp. hdd space
        path = /tmp
        read only = No
        guest ok = Yes

[cdrom]
        comment = Bokijev CD-ROM kanta L;)
        path = /mnt/cdrom
        read only = No
        guest ok = Yes
[ftp-pub]
        comment = FTP tree
        path = /home/ftp
        read only = No
        guest ok = Yes

root@marge:~#

 
Odgovor na temu

Dejan Lozanovic
Dejan Lozanovic
Beograd

Član broj: 691
Poruke: 2325
*.verat.net

Jabber: null@elitesecurity.org
Sajt: speedy-order.com


+75 Profil

icon Re: Samba, Rumba i ostale okretne igre28.09.2001. u 19:26 - pre 273 meseci
Bedak, ne radi probao sam da iskljucim TCP_NODELAY ali opet nista,da fora bude jos veca stavio sam tvoj smb.conf i opet isto ne radi :(((



Ovo vec polako pocinje da izludjuje



[Ovu poruku je menjao SyStemOuT dana 09-28-2001 u 07:28 PM GMT]
 
Odgovor na temu

m r v a

Član broj: 8
Poruke: 1843
*.yubc.net



Profil

icon Re: Samba, Rumba i ostale okretne igre29.09.2001. u 00:47 - pre 273 meseci
Ne gubi glavu ....
Probaj sa
Code:
 testparm 
.... trebalo bi da ti lepo debug-uje smb.conf ...

Nakon svega ....da li si probao da pristupas sambi sa nekog non-MS OS-a ??? ....ili mozda localhost-a ???

 
Odgovor na temu

m r v a

Član broj: 8
Poruke: 1843
*.yubc.net



Profil

icon Re: Samba, Rumba i ostale okretne igre29.09.2001. u 00:49 - pre 273 meseci
ps:
da se ne izgubimo u vremenu .....
Code:

root@marge:/usr/local/samba/bin# ./smbd -V
Version 2.2.0

 
Odgovor na temu

Dejan Lozanovic
Dejan Lozanovic
Beograd

Član broj: 691
Poruke: 2325
*.verat.net

Jabber: null@elitesecurity.org
Sajt: speedy-order.com


+75 Profil

icon Re: Samba, Rumba i ostale okretne igre01.10.2001. u 14:17 - pre 273 meseci
e resio sam muku, naime moram da ukljucim da se samba ucitava prilikom boot-a jer skript samba ne radi kako valja na LM 8.0, opet sa druge strane ne uspe na samom pocetku da ucita sve stampace, koristim cups, pa sam u smb.conf-u rucno dodao potrebne stampace.

Hvala na pomoci
 
Odgovor na temu

ctpaba
Robert IVKOVIC
System admin, network admin, webmaster,
dziber, ...
Paris

Član broj: 597
Poruke: 318
*.par.roche.com

ICQ: 230666231
Sajt: www.ctpaba.org


+1 Profil

icon Re: Samba, Rumba i ostale okretne igre02.10.2001. u 12:23 - pre 273 meseci
Citat:
SyStemOuT je napisao:
e resio sam muku, naime moram da ukljucim da se samba ucitava prilikom boot-a jer skript samba ne radi kako valja na LM 8.0, opet sa druge strane ne uspe na samom pocetku da ucita sve stampace, koristim cups, pa sam u smb.conf-u rucno dodao potrebne stampace.

Hvala na pomoci


brate ajd objasni detaljnije kako si to uradio jer sa KDE znam i ja kako se radi ali sad imam samo terminal !!!
hvala !!!

CTPABA uber alles
www.ctpaba.org
 
Odgovor na temu

Dejan Lozanovic
Dejan Lozanovic
Beograd

Član broj: 691
Poruke: 2325
*.verat.net

Jabber: null@elitesecurity.org
Sajt: speedy-order.com


+75 Profil

icon Re: Samba, Rumba i ostale okretne igre02.10.2001. u 19:00 - pre 273 meseci
Citat:
ctpaba je napisao:
Citat:
SyStemOuT je napisao:

e resio sam muku, naime moram da ukljucim da se samba ucitava prilikom boot-a jer skript samba ne radi kako valja na LM 8.0, opet sa druge strane ne uspe na samom pocetku da ucita sve stampace, koristim cups, pa sam u smb.conf-u rucno dodao potrebne stampace.



Hvala na pomoci




brate ajd objasni detaljnije kako si to uradio jer sa KDE znam i ja kako se radi ali sad imam samo terminal !!!

hvala !!!



E jebiga mozda jeste malo lame, ali nisam imao vremena da trazim po kojim se to fajlovima rucno sve podesava. Elem pod Mandrakeom imas nesto sto se Zove Mandrake Control Center. E tamo pod opcijom System | Servicves imas da podesis svaki daemon da li ces da ga pokrenes ili da ga zaustavis i imas opciju da startuje deamon prilikom bootovanja. Pa nista tu sam podesio samba i CUPS da se dizu prilikom butovanja i to je to. E da jos jedna muka koja se bila pojavila, naime kada sam podesio ranije da mi Samba bude master browser, jednostavno Linux masina se nije videla na find computer iz windowsa 98 tako dasam iskljucio sambi zelju dabude master browser i podesio OSlevel na 1.to je to.
 
Odgovor na temu

[es] :: Linux mreže :: Samba, Rumba i ostale okretne igre

[ Pregleda: 4689 | Odgovora: 7 ] > FB > Twit

Postavi temu Odgovori

Srodne teme
Navigacija
Lista poslednjih: 16, 32, 64, 128 poruka.